• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.575-584
• /
• 2017

It is suggested the circuit network to analyze the time response of control system. And it is analyzed the interrelation for classical control and modern control by the transfer function and the state equation. Without complicated integration of state transition equation, it is suggested to possible time response by combining the state transition matrix and the transfer function. A source program is coded to display the time response according to the unit-step and the sinusoidal input. Transient response is analyzed in the unit-step input and phase difference between current and voltage is analyzed in sinusoidal input. As writing the suggested contents in transient response or state-space analysis, it is improved the understanding for control engineering and ability for system design.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.7
• /
• pp.503-507
• /
• 1999

Quartz crystal in contact with viscoelastic medium was described directly in terms of the electrical equivalent circuit of the system. Stearic acid was used as viscoelastic medium and deposited on the surface of quartz crystal using the Langmuir-Blodgett(LB) method. Impedance properties of quartz crystal coated with LB films which were investigated by using admittance diagram and $Ζ-\theta$ plot a method of impedance analysis. When stearic acid LB film was deposited on the surface of quartz crystal, resonant frequency of quartz crystal was changed about 100 Hz/layer. This result illustrates the ability of the sensor system to detect small amounts of special gas in air.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1366-1379
• /
• 2019

High-gain DC/DC converters have become one of the key technologies for the grid-connected operation of new energy power generation, and its research provides a significant impetus for the rapid development of new energy power generation. Inspired by the transformer effect and the ripple-suppressed ability of a coupled inductor, a double-coupled inductor high gain DC/DC converter with a ripple absorption circuit is proposed in this paper. By integrating the diode-capacitor voltage multiplying unit into the quadratic Boost converter and assembling the independent inductor into the magnetic core of structure coupled inductors, the adjustable range of the voltage gain can be effectively extended and the limit on duty ratio can be avoided. In addition, the volume of the magnetic element can be reduced. Very small ripples of input current can be obtained by the ripple absorption circuit, which is composed of an auxiliary inductor and a capacitor. The leakage inductance loss can be recovered to the load in a switching period, and the switching-off voltage spikes caused by leakage inductance can be suppressed by absorption in the diode-capacitor voltage multiplying unit. On the basis of the theoretical analysis, the feasibility of the proposed converter is verified by test results obtained by simulations and an experimental prototype.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.655-662
• /
• 2011

SAR(Synthetic Aperture Radar) has the ability to generate high resolution images regardless of a weather condition(e.g. visibility good or poor and day or night, etc.). SAR is considered as one of the most important powers and needs for the future since it has been utilized in a number of important military fields such as early warning, urban defense, missile guidance system, etc. Additionally there are many civilian demands and applications in aviation, traffic control, earth and space explorations, weather forecast etc. This days, the ability to acquire and analyze information is needed to cope with the urgency of global politics and international changes. In this paper, technical survey and development review for SAR systems are investigated to derive the core and immature technologies of domestic defense industry.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1754-1766
• /
• 1993

The application of VXIbus system, an Industry standard, is rapidly spreading with its ability to offer the easiness of integration from GPIB and the fast data transmission from VMEbus system. Compared with VXIbus Register Based Device, VXIbus Message Based Device has a drawback In the aspect of speed. But it is possible to utilize high level ASCII commands to control a Message Based Device, therefore system integration is much easier with Message Based Device than with Register Based Device. And, the FFT analyzer is an instrument for signal analysis which can be inexpensively implemented to be fast and have high resolution. Its wide ability of analysis presents numerous application. So, it is necessary to apply VXIbus system to FFT analyzer. In this paper, the implementation of FFT analyzer is performed using a DSP module and by implementing all A/D conversion circuit and a control module which performs VXIbus interface. The device can be controlled by Slot0 Commender which supports VXIbus Shared Memory Protocol through VXIbus.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.5
• /
• pp.230-234
• /
• 2006

One of the methods currently being investigated as a possible non-intrusive diagnostic tool for condition monitoring of power transformer and cable is the recovery voltage measurement, which will be improving the ability to detect the content of water concentration and the ageing process in the insulation system and may thus be an indicator of insulation quality and its ageing status. The polarization phenomenon was studied using RVM with oil-paper samples. In order to interpret its mechanism, the Extended Debye model was introduced. With different circuit parameters, various simulation results were gotten. Furthermore, with the test samples of different ageing condition, measurements are accomplished in the lab. On the basis of this experiment as well as theoretical analysis, correlations between polarizations and ageing were analyzed.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.105-106
• /
• 2013

This paper proposes a new topology with active switched-capacitor and switched-inductor impedance network, which can obtain a high boost factor with small shoot-through time. The proposed topology uses an active switched capacitor and switched-inductor impedance network in order to couple the main circuit and input dc source for boosting the output voltage. The proposed topology contains all advantages of the classical Z-source inverter. Comparing with other topologies, the proposed topology uses lesser component and the voltage boost inversion ability significantly increases. The theoretical analysis, pulse width modulation control strategies, and a comparison with classical ZSI have been given in this paper. Both simulation and experimental results will be presented to verify the advantages of the proposed topology.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.93-96
• /
• 1993

BiCMOS technology, which combines CMOS and bipolar technology, offers the possibility of achieving both very high density and high performance. In this paper, the characteristics of BiCMOS and CMOS circuits, especilly the delay time is studied. BiCMOS inverter, which has high drive ability because of bipolar transistor, drives high load capacitance and has low-power characteristics because the current flows only during switching transient just like the CMOS gate. BiCMOS inverter has the less dependence on load capacitance than CMOS inverter. SPICE that has been used for electronic circuit analysis is chosen to simulate these circuits and the characteristics is discussed.

• Journal of electromagnetic engineering and science
• /
• v.6 no.1
• /
• pp.10-17
• /
• 2006

For the sake of the potential ability of overcoming interference in TD-SCDMA(time division-synchronous code division multiple access) systems, pilot signal is adopted, but the presented TD-SCDMA protocol has not considered the Rake technique for their mobile terminals. This paper developed a RAKE receiver algorithm and an implementation circuit, which make use of the pilot signal in the burst structure of the TD-SCDMA base station to estimate main channel parameter(channel delays) in the downlink of TD-SCDMA wireless network. The algorithm can reduce multipath interference for the mobile units in multiusers' case. Theoretic performance analysis presented in the paper and computer simulations show that there is a range of BER for Rake receiver and confirm that the proposed RAKE receiver algorithm achieved a better performance under multipath fading propagation and multiusers conditions.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.266-268
• /
• 2004

In this study, on-line measuring system were developed to verify performances and functions of traction system that are used in KTX(Korea Train eXpress) synthetically and efficiently, and have been measuring electric signals of vehicle as well as mechanical signals up to the present. Running-braking measuring equipment was constructed in vehicle to optimize signal acquisition and analysis ability of the measuring system. Measurement data of signal were performed acquisition, analysis and evaluation using this equipment. KRRI(Korea Railroad Research Institute) described about main specifications of measuring equipment. Also, the structure and principles as well as main circuit system were explained in brief. KRRI analyzed the characteristics comparing design values with experimental values about running distance, running time and positive acceleration for KTX is running in full traction. We analyzed the distance and time according to number of motor block. In result, running characteristics of traction system in KTX were verified and could be evaluated.