• Journal of Environmental Health Sciences
• /
• v.29 no.3
• /
• pp.65-71
• /
• 2003

The injection concentration of corrosion inhibitor increases under the pH 7, temperature of 2$0^{\circ}C$, and alkalinity of 35 mg/l (as CaCO$_3$), the corrosion rate gradually decreased. When the corrosion inhibitor of 10 mg/l is injected, the corrosion rate for carbon steel pipe, galvanized steel pipe, and copper pipe reduces for 37, 66 and 61 % respectively that it is more efficient on galvanized steel pipe and copper pipe. As a result of examination of corrosion rate at pH 6, 7, and 8 when injecting 10 mg/l of corrosion inhibitor under the conditions of 2$0^{\circ}C$ in water temperature and 35 mg/l (as CaCO$_3$) in alkalinity, the efficiency of the corrosion inhibitor increases as the pH increases. For carbon steel pipe, it does not show much a difference with the change of the pH condition, but galvanized steel pipe and copper pipe clearly show the corrosion rate depending on the change of the pH condition. The efficiency of corrosion inhibitor is low as the concentration of residual chlorine is high, but it does not show a great influence at 0.4 mg/l or less. For each pipe type, in the case of carbon steel pipe, the range of increase of corrosion speed following the residual chloride is higher than the other pipe types. In the meantime, the effect following the residual chlorine in copper pipe is low.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.2
• /
• pp.63-70
• /
• 2016

The distributed systems managed by K-water were surveyed to study the characteristic of disinfection-by-product (Trihalomethans & Haloacetic acids) formation and the correlations between the concentrations of disinfection-by-product and physico-chemical parameters. Five distribted system were selected according to their water ages and the degree of deterioration of their pipelines. Total seven items including Trihalomethans (THMs), Haloacetic acids (HAAs), BDOC, DOC, pH, chlorine residual, and temperature were analysed in monthly basis. The concentration of organic matter were increased according to water age and pipeline deterioration in this study. The coefficient of determination between the decline of residual chlorine and the increase of water age was revealed as high. Also, the coefficient of determination between the decline rate of residual chlorine and the increase of the Trihalomethans concentration were studied as high. Furthermore the longer water age is the bigger the effect on Trihalomethans formation and temperature. However, the coefficient of determination between the concentraion of Haloacetic acid and water age, residual chlorine, and temperature were revealed as low in this study.

• Journal of Life Science
• /
• v.25 no.9
• /
• pp.1036-1042
• /
• 2015

By using effective sanitizers, early block for transmission of pathogens is the effective way to prevent epidermic outbreaks. Here we developed a chlorine oxide bubbling type of sanitizing tablets and evaluated the disinfectant and sanitization effects. The sanitizers showed 99.999% of sanitization effect for Escherichia coli ATCC 10536 and Staphylococcus aureus ATCC 6538 strains for 5 min±10 sec on 20±1℃ in clean condition by dilution-neutralization method. It reduced more than 5 log₁₀ cfu/ml of a legal permission standard of colony reduction. When a few used socks and underwear soaked for one hour in the 0.1% of the sanitizing tablets, no microorganisms were grown on CHROMagar plates. However, on CHROMagar plates of the no sanitizing tablets treated control, about 6.5×10⁴ cfu/ml of Staphylococcus sp., Klebsiella sp. and Enterococus sp. were grown. Furthermore, the sanitizing tablets killed approximately 1.5x10⁸ cfu/ml of E. coli BL21 in 5 minutes. Therefore, we concluded that the chlorine based bubbling type of sanitizing tablets satisfied the legal standard for the regulation of food and drug safety for disinfectants and sanitizers to pathogens and daily supplies.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.10
• /
• pp.685-690
• /
• 2014

The treatment of combined sewer overflow (CSO) is one of potential concerns in domestic wastewater treatment in Korea due to the pre-announce of CSO regulations. This work investigated the effects of disinfectant (NaOCl) concentration (0.11 to 4.0 mg $Cl_2/L$), pH (6.5 to 8.0), temperature (15 to $25^{\circ}C$), ammonia (10 to 41 mg N/L), and suspended solids (91 to 271 mg SS/L) on the chlorine disinfection of CSO. The effect of NaOCl concentration on the pseudo-$1^{st}$ order reaction rate for total coliform inactivation was described well with a saturation-type model with the half-velocity constant of 1.212 mg/L. The total coliform inactivation reaction rate decreased with SS and pH, and increased with temperature. Ammonia in the examined range did not affect the disinfection kinetics. A chlorine contact tank with the injection chlorine level of 1 mg $Cl_2/L$ and the hydraulic retention time of 1.25 min is estimated to reduce total coliform from $1{\times}10^5MPN/mL$ to 1,000 MPN/mL at 271 mg SS/L, $15^{\circ}C$, and pH 8.0. Chlorine would be a proper option for the disinfection of CSO.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.3
• /
• pp.201-208
• /
• 1994

In order to study the effect of exsisting soil nutritional elements on the nitrogen uptake of sunflower, sorghum and black gram, pot experiment was carried out by using soils sampled from three different depths(0~20, 45~65, 90~110cm) of Brigalow soil in Australia. The results obtained were as follows : Dry matter and nitrogen uptake of corps were increased in the soil with higher nitrogen content. Chlorine uptakes of sunflower and sorghum were increased in the soil with higher nitrogen and lower chlorine contents, but that of black gram was done in the soil with higher contents of both elements. Ratios of nitrogen derived from applied fertilizer of three corps and fixed nitrogen of black gram were relatively low in the soil with higher content of soil nitrogen, but those derived from soil nitrogen were reverse. Recovery rates of applied nitrogen were relatively increased with higher cation uptakes of crops. Chlorine uptakes of sunflower and sorghum were positively correlated with each recovery of nitrogen, but that of black gram didn't show the trend. Recovery rate of applied nitrogen for black gram had significantly negative correlation with increase of soil chloride content.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.74-80
• /
• 2015

In this study, the microbial control effect after treatment of washing solutions (tap water, electrolyzed water, chlorine dioxide solution) and quality changes were investigated when Kwamegi is produced by means of the cold air drying. The initial moisture rate of the sample was 56.62% before drying. At the beginning of drying period, moisture rate sharply fell down but as the experiment progressed, moisture reducing rate was smoothly decreased. The color difference of Kwamegi before drying was 42.40, but it was reduced depending on the increment of drying temperature and time. TBA value of the initial sample was 0.219, rancidity were increased continuously when drying progressed. Total amino acid content was showed the highest value at $25^{\circ}C$ for 36h and the lowest at $40^{\circ}C$ for 12h. From the fatty acids analysis, major fatty acids were consisted of the 14:0, 16:0 and 18:1 (18.1520.96%, 28.0632.51% and 17.0619.81%, respectively). The microbial control effect was biggest when Kwamegi was washed with chlorine dioxide 100ppm for 60s. The microbe of the Kwamegi, Pseudomonas sp. and Pseudomonas putida were identified.

• Journal of Surface Science and Engineering
• /
• v.51 no.4
• /
• pp.207-213
• /
• 2018

Not only efficiency of chlorine evolution reaction (CER) but also durability namely service life is very important property in dimensional stable anode for Ballast Water Management System (BWMS) for marine ships. Many researchers have been focused on improving efficiency of CER by controlling composition, phase and surface area for a long time, but the efforts to increase durability was relatively small. In this study, we have investigated the effect of $TiO_2$ protective interlayers on efficiency and durability of DSA electrodes. $TiO_2$ protective interlayers were prepared by thermal oxidation at 500, 600 and $700^{\circ}C$ on Ti substrate. And then the DSA electrodes consisting of $Ti/RuO_2-PdO-TiO_2$ were prepared by thermal decomposition method on $TiO_2$ interlayers. The efficiencies of CER of DSA electrodes without $TiO_2$ interlayer and with $TiO_2$ interlayer grown at 500, 600 and $700^{\circ}C$ were 94.19, 94.45, 84.60 and 76.75% respectively. On the otherhand, durabilities were 30, 55, 90 and 65 hours respectively. In terms of industrial aspect, the performance of DSA is considered high efficiency and durability which can correspond to total production of chlorine. If we considered the performance index of DSA as the product of efficiency and durability, performance indices could be recalculated as 28.26, 50.85, 76.14 and 49.89 respectively. As the thermal oxidation temperature increasing, life time were increased remarkerbly, while efficiency of CER was decreased slightly. As a result, DSA electrode with $TiO_2$ interlayer grown at $600^{\circ}C$ has shown about 2.7 times performace of original DSA electrode without $TiO_2$ interlayer.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.2
• /
• pp.138-146
• /
• 2021

Objectives: This study aims to compare and evaluate the reduction efficiency of disinfectants used in the domestic meat processing industry to reduce bioaerosol exposure of meat industry workers and to use this as basic data for establishing work environment management measures. Methods: Thirteen disinfectants sold in South Korea were selected for evaluation and the bacterial reduction effect of the disinfectants was investigated. Bacterial suspension and surface disinfection tests were conducted to compare and analyze the antibacterial strength of the disinfectants. Pork carcasses, cutting boards, benches, and conveyor belts were selected for surface sterilization tests. Results: As a result of the bacterial suspension experiment test, all disinfectants had a bacterial reduction efficiency of more than 86%. Among them, the bacterial reduction efficiency of chlorine disinfectants was 99.93% on average. In the results of the pork carcass surface sterilization test, the rate of reduction of disinfectants made of quaternary ammonium compounds (QACs) was the highest. Tests of plastic cutting boards showed that chlorine disinfectants had the best sterilization effect. Experiments on stainless steel benches showed the best bacterial reduction efficiency for chlorine dioxide and QACs disinfectants. In the conveyor belt made of urethane, QACs disinfectants showed excellent sterilization effects. Conclusions: The study evaluated the disinfection power of disinfectants against bacteria occurring in domestic meat processing plants. All disinfectants were found to be effective in bacterial suspension experiments, and chlorine disinfectants were particularly effective. In surface sterilization experiments, sterilizing agents with QACs as the main ingredient were excellent.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.3053-3056
• /
• 2009

The title compound, ${\alpha},{\alpha}$-dichloro-o-methylacetophenone, was prepared and its photochemical behavior was investigated. Addition of an extra chlorine at alpha position to the carbonyl showed many different features from photochemical reactivities of mono chloro analogue, 2,5-dimethylphenacyl chloride. In benzene, a rearrangement product with a formal 1,5-Cl shift and a reduction product were formed beside indanone. In methanol, solvolysis and cyclization of a common dienol intermediate occurred at comparable reaction rates.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.916-927
• /
• 2010

In general water treatment process, the disinfection process by chlorine is used to prevent water borne disease and microbial regrowth in water distribution system. Because chlorines were reacted with organic matter, carcinogens such as disinfection by-products (DBPs) were produced in drinking water. Therefore, a suitable injection of chlorine is need to decrease DBPs. Rechlorination in water pipelines or reservoirs are recently increased to secure the residual chlorine in the end of water pipelines. EPANET 2.0 developed by the U.S. Environmental Protection Agency (EPA) is used to compute the optimal chlorine injection in water treatment plant and to predict the dosage of rechlorination into water distribution system. The bulk decay constant ($k_{bulk}$) was drawn by bottle test and the wall decay constant ($k_{wall}$) was derived from using systermatic analysis method for water quality modeling in target region. In order to predict water quality based on hydraulic analysis model, residual chlorine concentration was forecasted in water distribution system. The formation of DBPs such as trihalomethanes (THMs) was verified with chlorine dosage in lab-scale test. The bulk decay constant ($k_{bulk}$) was rapidly decreased with increasing temperature in the early time. In the case of 25 degrees celsius, the bulk decay constant ($k_{bulk}$) decreased over half after 25 hours later. In this study, there were able to calculate about optimal rechlorine dosage and select on profitable sites in the network map.