• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.3
• /
• pp.107-116
• /
• 2020

Four air hardening steels with carbon, silicon, manganese, chromium, and molybdenum variations have been used in this study to find out the optimal chemical compositions of steels with over 1200 MPa tensile strength for automotive subframe. The dimensional changes after heat treatment were determined for two automotive parts with open and closed cross sections using 3D scanner. When four steels were austenitized at 900℃ for 30 seconds, cooled at 3℃/s, reheated to 450℃ for 10 seconds followed by air cooling to simulate hot-dip galvanizing treatment showed ultra high tensile strength over 1200 MPa. Rear floor cross member with open cross section revealed much bigger dimensional changes than subframe with closed cross section after heat treatment at 900℃ for 20 minutes followed by air cooling.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.492-494
• /
• 2004

The purpose of this study is to investigate the hydrochemical characteristics of groundwater in the Umsung area, and to elucidate the effect of host rock type, well depth and mineralization zone on the groundwater chemistry, We carried out chemical analysis, isotopic analysis, statistical analysis of Box-Whisker and trigging analysis for this study. The chemical and isotopic compositions of the groundwater is distinguished into two areas according to host rocks(Cretaceous sedimentary rocks and Jurassic granite) and recharge altitude, and is not greatly influenced by mineralization zone of the mines.

• Korean Journal of Poultry Science
• /
• v.22 no.3
• /
• pp.155-160
• /
• 1995

To evaluate the nutritive values of outdoor mass cultivated Spirulina platensis both chemical analysis and bioassay were carried out using adult cockerels. Blue-green algae, Spirulina platensis contained about 71g /l00g DM of crude protein with balanced amino acid profiles although methionine is liable to he limiting to animals. Compared to fish meal, calcium content and calcium : phosphorus ratio of the Spirulina were not suitable in terms of animal requirements. Reasonable amount of y-linolenic acid(C18: 3 $\omega$6) in Spirulina platensis draws a clinical attention due to its historically recognized pharmacotheraputic functions. Metabolizable energy contents of Spirulina were 3.67 and 3.11 mcal /kg DM for TMEn and AMFn, respectively, which therefore, can he a reliable energy source for poultry. True amino acid availabilities of essential amino acids of Spirulina platensis were higher than 90% for poultry, which is better than comparative ingredient like fish meal. Overall data from both chemical analysis and bioassay demonstrated that the Spirulina platensis could he a favorable protein feedstuffs for poultry.

• Advances in materials Research
• /
• v.1 no.4
• /
• pp.269-284
• /
• 2012

Thermoresponsive hydrogels based on N-Isopropylacrylamide (NIPAM) and 2-Hydroxyethylacrylate (HEA) were prepared by free radical polymerization. The hydrogels were characterized by elemental (CHN) analysis, differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA). DSC thermogram showed two endothermic transitions which are due to hydration of water present in different environments. One near $0^{\circ}C$ called melting transition of ice and was used to calculate the quantitative determination of the amounts of freezing and non freezing water. The other transition above the ambient temperature was due to the combination of hydrophobic hydration and hydrophilic hydration which changes with the copolymer compositions. Swelling and deswelling studies of the hydrogels were carried out using the aqueous media, salt and urea solutions. The experimental results from swelling studies revealed that copolymers have lower rates of swelling and deswelling than the homopolymer.

• Journal of Ginseng Research
• /
• v.16 no.1
• /
• pp.1-6
• /
• 1992

Chemical composition was determined to evaluate the quality of Panel ginseng-leaf tea over green teas. Ginseng-leaf tea was shown to contain higher contents of soluble matter, ascorbic acid and lower contents of tannins, as compared to tea leaves. The profiles of ginsenoside and sugar of ginseng-leaf tea were noticeably different from those of ginseng roots and the sample maintained high levels of these components under the manufacturing process. Total unsaturated fatty acids and free amino acids were estimated to be decreased in ginseng-leaf tea as compared to those of ginseng leaves. The compositions of amino acids and minerals in ginseng-leaf tea were similar to those of tea leaves and glutamic acid, aspartic acid, leucine, calcium, potassium, sodium, and copper were found to be major components.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.04a
• /
• pp.47-52
• /
• 2000

Recently, it is very necessary the development of the manufacturing techniques for high strength concrete(HSC) for the large-scale size and good quality of civil structure. But, the manufacture and quality control of HSC of which shrinkage, heat of hydration and workability at construction filed are considered, is very difficult due to its low water-cement ratio and high quantity of unit cement content. In the present study, we tried to know and assess the influences of chemical and physical properties of cement on the material properties of HSC. We analyzed basic properties of 4 kinds of cement whose chemical and physical properties are different each other through various tests such as chemical analysis and mortal test. Also, we performed the assessment of the material properties of HSC for each dement by the test for the conditions of same mix design and similar compressive strength. From the results in the study, the assessment of the important quality factors of cement influencing the properties of HSC may be utilized to quality control of applied cement to manufacture the HSC of high quality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.485.1-485.1
• /
• 2014

In this research, we report the synthesis of three-dimensional (3D) hierarchical porous graphene aerogels (hpGAs) for application to electrochemical energy storage. For electrochemical systems, the specific capacitance is a key parameter to evaluate the characteristics of electrode materials. By taking full advantage of large surface area, 3D hpGAs would achieve the larger specific capacitance over rGO film and GAs. Microscopic structures and topologies of hpGAs were investigated using field emission scanning electron microscopy and transmission electron microscopy. X-ray photoelectron spectroscopy was used to determine the chemical compositions of rGO film, GAs, and hpGAs. Raman spectra were recorded from 100 to 2500 cm-1 at room temperature using a Raman spectroscopy equipped with a ${\times}100$ objective was used. The specific area and pore distribution of GAs and hpGAs were obtained using a Brunauer-Emmett-Teller apparatus.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.261-261
• /
• 2010

Photonic band gap (PBG) materials have been of great interest due to their potential applications in science and technology. Their applications can be further extended when PBG becomes tunable against various chemical and electrical stimuli. In recent, it was found that tunable photonic band gap materials can be achieved by incorporating stimuli-responsive smart gels into PBG materials. For example, the characteristic volume phase transition of gels in response to the various external stimuli including temperature, pH, ionic strength, solvent compositions and electric field were recently combined with the unique optical properties of photonic crystals to form unprecedented highly responsive optical components. Since these responsive photonic crystals are capable of reversibly converting chemical or electrical energy into characteristic optical signals, they have been considered as a good platform for label-free chemical or biological detection, actuators or optical switches as well as a model system for investigating gel swelling behavior. Herein, we report block copolymer photonic gels self-assembled from polystyrene-b-poly (2-vinyl pyridine) (PS-b-P2VP) block copolymers. In this talk, we are going to demonstrate that selective swelling of lamellar structure can be effectively utilized for fabricating PBG materials with extremely large tunability. Optical properties and their applications will be discussed.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.1
• /
• pp.17-23
• /
• 1998

To prepare a O/W type nonionic durable softner(ANSA), synthesized 1, 3-dihexadanoyl-2, 7-dioxy-6, 8-di(2-hexadecanoyloxyethyl)-1, 3, 6, 8-tetraazacyclodecane as the main component of softner, was blended with beef tallow, anhydrous lanolin, polyoxyethylene(20) oleyl ether, sorbitan sesquioleate, and polyoxyethylene(7) stearyl ether in various compositions. Emulsion stability of ANSA was good, and the mixed HLB value was 9.8. After the treatment of ANSA to all cotton fabrics, the physical properties such as tear strength, crease recovery, and flexing abrasion resistance were measured, respectively. As a result of the measurement, ANSA was proved to be durable softner with good softness.

• YAKHAK HOEJI
• /
• v.29 no.2
• /
• pp.96-102
• /
• 1985

Innovated utilization of Korean kaolins as pharmaceuticals is attempted, for which relevant properties including adsorptive behaviours are observed in connection with their mineralogical structures. In practice, physico-chemical properties are assessed by means of IR, XRD and thermal analysis including DTA, TG and DSC. Elemental analysis of the ore specimens under investigation is carried out in conventional manners. It is found that the chemical compositions are varied significantly with sampling sites and primary classifications. The clay ores thus analyzed are mainly composed of halloysite species. Proper benefication of the raw clays is necessary so that authentic requirements for medicinal use may be satisfied. White-colored premium grade halloysite could be utilized as therapeutics with relative ease after purification. Evidence indicates that gibbsite-like impurities are intercalated between the 1 : 1 layered moieties. Thermal behaviours may be characterized in such a fashion that loss of free water occurs near 100.deg. C and further heatings result in liberation of bound water near 500.deg. C, with subsequent transformation into amorphous metastable entities. Through thermal activation, enhanced pharmaceutical effects could be envisaged.