• 반도체디스플레이기술학회지
• /
• 제6권2호
• /
• pp.35-40
• /
• 2007

An integrated material removal model considering thermal, chemical and contact mechanical effects in CMP process is proposed. These effects are highly coupled together in the current modeling effort. The contact mechanics is employed in the model incorporated with the heat transfer and chemical reaction mechanisms. The mechanical abrasion actions happening due to the mechanical contacts between the wafer and abrasive particles in the slurry and between the wafer and pad asperities cause friction and consequently generate heats, which mainly acts as the heat source accelerating chemical reaction(s) between the wafer and slurry chemical(s). The proposed model may be a help in understanding multi-physical interactions in CMP process occurring among the wafer, pad and various consumables such as slurry.

• 한국전기전자재료학회논문지
• /
• 제18권4호
• /
• pp.321-326
• /
• 2005

Chemical mechanical polishing(CMP) process is essential technology to be applied to manufacturing the dielectric layer and metal line in semiconductor devices. It has been known that overpolishing in CMP depends on pattern selectivity as a function of density and pitch, and use of fixed abrasive pad(FAP) is one method which can improve the pattern selectivity. Thus, dishing & erosion defects can be reduced. This paper introduces the manufacturing technique of FAP using hydrophilic polymers with swelling characteristic in water and explains the self-conditioning phenomenon. When applied to tungsten blanket wafers, the FAP resulted in appropriate performance in point of uniformity, material selectivity and roughness. Especially, reduced dishing and erosion was observed in CMP of tungsten pattern wafer with the proposed FAP.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.378-379
• /
• 2006

CMP(chemical mechanical polishing) process has been attracted as an essential technology of multi-level interconnection. However, the COO(cost of ownership) is very high, because of high consumable cost. Especially, among the consumables, slurry dominates more than 40 %. So, we focused how to reduce the consumption of raw slurry. In this paper, $ZrO_2$, $CeO_2$, and $MnO_2$ abrasives were added de-ionized water (DIW) and pH control as a function of KOH contents. We have investigate the possibility of new abrasive for the oxide CMP application.

• 한국전기전자재료학회논문지
• /
• 제15권10호
• /
• pp.851-857
• /
• 2002

CMP(chemical mechanical polishing) process has been attracted as an essential technology of multi~level interconnection. However, the COO(cost of ownership) is very high, because of high consumable cost. Especially, among the consumables, slurry dominates more than 40%. So, we focused how to reduce the consumption of raw slurry In this paper, we presented the pH changes of diluted slurry and pH control as a function of KOH contents. Also, the removal rates of slurry with different dilution ratio were investigated. Finally, the CMP characteristics were discussed as a function of silica (SiO$_2$) abrasive contents.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 반도체 재료 센서 박막재료 전자세라믹스
• /
• pp.89-92
• /
• 2004

Chemical mechanical polishing (CMP) process has been widely used to planarize dielectric layers, which can be applied to the integrated circuits for sub-micron technology. Despite the increased use of CMP process, it is difficult to accomplish the global planarization of in the defect-free inter-level dielectrics (ILD). we investigated the performance of $WO_3$ CMP used silica slurry, ceria slurry, tungsten slurry. In this paper, the effects of addition oxidizer on the $WO_3$ CMP characteristics were investigated to obtain the higher removal rate and lower non-uniformity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.18-22
• /
• 2002

CMP(chemical mechanical polishing) process has attracted as an essential technology of multilevel interconnection. However, the COO(cost of ownership) is very high, because of high consumable cost. Especially, among the consumables, slurry dominates more than 40%. So, we focused that it has how to reduce the consumption of raw slurry. In this paper, we presented the pH changes of diluted slurry and pH control as a function of KOH contents. Also, the removal rates of slurry with different dilution ratio was investigated. Finally, CMP the characteristics as a function of silica($SiO_2$) abrasive contents were discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 추계학술대회 논문집 Vol.15
• /
• pp.23-26
• /
• 2002

In this paper, We have studied the CMP (chemical mechanical polishing) characteristics of diluted slurry by adding of raw alumina abrasive and annealed alumina abrasive. As a experimental results, we obtained the comparable slurry characteristics compared with original silica slurry in the view point of high removal rate and low non-uniformity. Therefore, we can reduce the cost of consumables(COC) of CMP process for ULSI applications.

• 한국전기전자재료학회논문지
• /
• 제18권3호
• /
• pp.219-225
• /
• 2005

To investigate the effects of slurry temperature on the chemical mechanical polishing(CMP) performance of oxide film with silica and ceria slurries, we have studied slurry properties as a function of different slurry temperature. Also, the effects of each input parameter of slurry on the oxide CMP characteristics were investigated. The pH showed a slight tendency of decrease, the conductivity in slurries showed an increased tendency, the mean particle size in slurry decreased, and the zeta potential of slurry decreased with temperature. The removal rates significantly increased and maintained at the specific levels over 4$0^{\circ}C$. The better surface morphology of oxide films could be obtained at 40 $^{\circ}C$ of silica slurry and at 90 $^{\circ}C$ of ceria slurry. It is found that the CMP performance of oxide film could be significantly improved or controlled by change of slurry temperature.

• 한국진공학회지
• /
• 제7권2호
• /
• pp.88-93
• /
• 1998

본 연구에서는 기계-화학적 연마(Chemical-Mechanical-Polishing: CMP)공정을 이용 하여 게이트 전극을 가지는 실리콘 전계방출 소자를 제작하였으며, 또한 그 전자방출 특성 을 분석하였다. 실리콘 전계방출 소자를 제작하기 위해 실리콘을 두단계로 이루어진 건식식 각과 산화공정으로 팁을 뾰족하게 만들었으며, 게이트를 형성하기 위하여 고 선택비를 가지 는 CMP공정을 사용하였으며, 연마 시간과 연마 압력의 변화로 게이트 높이와 개구의 직경 을 쉽게 조절할 수 있었다. 또한, CMP공정시 발생되는 디싱(dishing)문제를 산화막 마스킹 을 사용함으로 해결하여 자동 정렬된 게이트전극의 개구를 깨끗하게 형성할 수 있었다. 제 작된 에미터의 높이와 팁끝의 반경은 각각 1.1$\mu$m, 100$\AA$정도이며, 제작된 2809개의 팁 어 레이로 80V의 게이트전압에서 31$\mu$A의 방출전류를 얻을 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.153-154
• /
• 2010