• 한국인쇄학회지
• /
• 제30권2호
• /
• pp.1-12
• /
• 2012

In this experiment, we have manufactured thermal-curable silver pastes for direct printing. And to enhance conductivity, printability, adhesion and hardness during polymer direct-gravure prints, we have manufactured Ag pastes by adding variety of filter contents. Then we have investigated characteristics of rheology in paste according to the gravure printability and the properties of printed conductive patterns. Depending on a variety of Ag powder, there was a big difference in sharpness of printed pattern. And also by the use of carbon, there was a big difference in amount of solvent used, conductivity and in hardness. We could improve doctoring and the sharpness of a pattern by adding Ag paste in carbon particle, but as we have used nano-sized particle, there was an increase in the amount of solvent used and also we have found out that it gives a bad effect as adhesive and hardness becomes weaker. Even though Ag particle has the same spherical shape, the surface treatments could differ from one another. And by the appropriate choice and with the suitable combination of Ag powder, excellent printability and conductivity could be obtained.

• 환경위생공학
• /
• 제17권3호
• /
• pp.21-30
• /
• 2002

This study was Performed to evaluate the effective solidification of Cd sludge using cement and power plant fly ash as cement admixture, to identify the leaching characteristics of the heavy metal Cd sludge solidified, and to develope proper KLT(Korean Leaching Test) of hazardous waste. KLT was compared with EPT(Extraction Procedure Toxicity) and TCLP(Toxicity Characteristics Leaching Procedure). Fly ash contents ranged from 0% to 30% of cement weight. The experimental results showed that the optimum amount of fly ash replaced was 10% to 15% and KLT was less appropriate than EPA and TCLP. Also the purpose of the study was to suggest the modification factors on the leaching test currently used, based on the above mentioned aspects. The effects of pH, leaching time, leaching for agitating intensity, and leaching solvent were investigated. As the result of test, the leaching potential was relatively high when the pH and agitation intensity of leaching solution were 5 and 150rpm, respectively. Leaching time of six hours was found to be sufficient and the use of acetic acid as a leaching solvent is more useful in landfill site particularly.

• Tribology and Lubricants
• /
• 제25권4호
• /
• pp.207-216
• /
• 2009

Friction tests were carried out in order to investigate the effects of temperature on the friction and wear behaviors between a PMMA film and a fused silica lens using a microtribometer. The friction forces on the PMMA film were measured under atmospheric condition as the temperature of the film was increased from 300 K to 443 K. The contact area between the film and the lens was observed. The tribological characteristics of the film were significantly changed as the temperature increased. The changes were discussed with the change of the film state from glassy to viscous flow. In addition, the results showed that the friction behavior can be varied with the thermal history of the PMMA film. Residual solvent in the PMMA film could emerge to the PMMA surface due to an additional heating and the solvent on the film surface decreased the friction force.

• 한국세라믹학회지
• /
• 제51권4호
• /
• pp.324-331
• /
• 2014

The dispersion characteristics of AlN-4.5 wt% $Y_2O_3$ powder mixture by various dispersants were investigated in ethanol and methyethly-ketone (MEK) solvents. In general, the cationic polymer dispersants demonstrated superior dispersion of the powder as compared to the non-ionic ester-type dispersants or anionic phosphate-ester-based ones. The dispersion performance of the cationic polymer dispersants was sensitive to the type of solvent. An anhydric maleic-acid-based graft copolymer dispersant, AFB-1521, demonstrated a very good dispersion capability in ethanol but exhibited a much inferior dispersion in MEK. On the other hand, the dispersion of the powder mixture was very good with a phosphate-ester-based block polymer dispersant, BYK-111, in MEK solvent, while dispersionwas much degraded in ethanol.

• 멤브레인
• /
• 제9권4호
• /
• pp.215-220
• /
• 1999

고농도의 초산수용액(80 wt% 이상)을 분리 농축하기 위하여 내용매성이 우수하며 고온에서의 내열성을 가지는 폴리이미드 비대칭막을 만들어 막의 특성을 검토하고 물-초산 계의 투과증발 분리성능을 고찰하였다. 제막은 폴리아믹산의 상전이용액으로 톨루엔을 사용한 것이 가장 좋은 상태의 막을 얻을수 있었다. 열처리에 의한 imide화는 373, 473573 K에서 각각 1시간씩 연속적으로 처리하는 것이 가장 효과적이었다 막은 물-초산 계의 투과증발 분리에 의한 열내구성 및 화학적 안정성이 우수하였다 폴리이미드막의 투과증발 분리특성은 80 wt% 초산수용액 계에서 분리계수는 180 투과유속은 0.5kg/$m^2$hr을 얻을 수 있었다.

• Archives of Pharmacal Research
• /
• 제13권4호
• /
• pp.293-297
• /
• 1990

Sustained release microspheres containing phenylpropanolamine HCI (PPA) were prepared with acrylic polymer (Eudragit RL/RS) sand hydroxypropylmethylcellulose phthalate (HPMCP) using a emulsion-solvent evaporation method. Magnesium strate was used a smoothing agent for preparation of microspheres. The microspheres obtained were very spherical and free-flowing particles. Scanning electron microscopy showed that microspheres have a smooth surface and a sponage-like internal structure. The dissolution rate of PPA from the microspheres was dependent on the pH of dissolution media. PPA showed faster relase in hP 1. 2 solution than in pH 7.4 solution due to the solubility of PPA. Therefore we prepared new microspheres containing 5% (w/v) HPMCP in order to control the release of PPA. The release rate of PPA from these new microspheres was similar in pH 1.2 and pH 7.4 solution.

• Macromolecular Research
• /
• 제15권5호
• /
• pp.403-411
• /
• 2007

Monodisperse micron-sized polystyrene (PS) spheres were successfully obtained using a single stage soap-free emulsion method in aqueous media mixed with ethanol (co-solvent) containing NaCI as the electrolyte. The optimum conditions for preparing the monodisperse PS microspheres, using soap-free emulsion polymerization in a water/ethanol mixture with an electrolyte, were studied. The presence of the co-solvent and electrolyte controlled the particle dispersion stability during the polymerization. The microspheres formed using PS, with a weight-average diameter of $2.6{\mu}m$, coefficient of variation of 5.3% and zeta potential of -15.1 eV, were successfully obtained in the presence of 0.1 wt% NaCI, 10 wt% monomer, 0.1 wt% initiator and 95/5 (g/g) of a water/ethanol mixture reacted at $70^{\circ}C$ for 24 h.

• 대한본초학회지
• /
• 제22권4호
• /
• pp.29-34
• /
• 2007

Objective : Kyenegum(Galli Stomachichum Corium) has been popularly used long as the digestive. The purpose of this study was to investigate the enzymatic characteristic of Kyenegum crude enzyme. Methods : To evaluate of the enzymatic characteristic of Kyenegum, we examined the activity of Kyenegum crude enzyme from optimum solvent, optimum temperature and pH of crude Kyenegum extract. Futhermore, we examined the effects of NaCI and acidity of crude Kyenegum extract. Results : The Kyenegum was composed with crude protein about 20%, crude lipid 2%. The optimum Kyenegum dry condition, optimum extract solvent, optimum temperature and optimum pH were $4{\sim}6$ hours at $60^{\circ}C$, commercial apple vinegar, $50^{\circ}C$ and 2.0. Conclusion : The result suggests that the Kyenegum crude enzyme extract very strong enzyme in temperature, NaCl and acidity, respectively.

• KSBB Journal
• /
• 제29권6호
• /
• pp.405-413
• /
• 2014

In this study, gemcitabine (Gem)-Poly(L-lactic acid) (PLLA) conjugates were synthesized through an amide linkage reaction. Then, the microparticles of Gem-PLLA/PLLA blends containing gemcitabine were prepared using a supercritical fluid process, called aerosol solvent extraction system (ASES). Gemcitabine-loaded Gem-PLLA/PLLA microparticles obtained from the ASES process showed a spherical shape. The amount of gemcitabine released after 30 day incubation in a phosphate buffer solution of pH 7.4 was about 90% of the total amount of gemcitabine present in the product.

• 통합자연과학논문집
• /
• 제10권4호
• /
• pp.225-231
• /
• 2017

Cryptand resins were synthesized by mixing 1-aza-18-crown-6 macrocyclic ligand with styrene divinylbenzene copolymer having 1%, 2%, 5%, and 10% crosslink by a substitution reaction. These synthetic resins were confirmed by chlorine content, elementary analysis, SEM, surface area, and IR-spectrum. As the results of the effects of pH, crosslink of synthetic resin, and dielectric constant of a solvent on uranium ion adsorption for resin adsorbent, the uranium ion showed high adsorption at pH 3 or over. Adsorption selectivity for the resin in methanol solvent was the order of uranium ($UO_2{^{2+}}$) > calcium ($Ca^{2+}$) > neodymium ($Nd^{3+}$) ion, adsorbability of the uranium ion was the crosslink in order of 1%, 2%, 5%, and 10% and it was increased with the lower dielectric constant.