• 한국전자파학회논문지
• /
• 제12권5호
• /
• pp.777-786
• /
• 2001

본 논문에서는 64-QAM 디지털 무선 전송장치에 적용할 목적으로 주파수 선택적 페이딩 대책 중의 하나인 디지털 기울기 등화기의 원리, 채널 모델링 및 디지털 구현방법을 분석하였다. 또한 복소 13-탭 시간영역의 적응 등화기 칩과 연동시의 성능분석을 수치계산으로 수행하였으며, 장치의 signature 특성을 통과대역 가장자리에서 약 4.5 dB 개선시킬 수 있음을 보였다. 그리고 디지털 기울기 등화기의 모델링에 대한 한계, 동작 자파수, 제어계수, 신호의 constellation, 장치의 성능에 대한 다양한 결과도 검토하였다. 끝으로 61 MHz 클럭까지 동작시험을 검증한 디지털 기울기 등화기의 칩에 대한 기능을 소개한다.

• 산업기술연구
• /
• 제18권
• /
• pp.431-437
• /
• 1998

In this paper, we presented a modeling of the power line channel and a new digital communication system over the channel. Firstly, we proposed a new tranceiver structure with DS-CDMA spread spectrum technique and convolutional coder and block interleaver against severe noisy power line environment. Also, QPSK modulation technique was used to get bandwidth efficiency. And then we performed a simulative evaluation of the system using MATLAB communication/simulink toolbox. According to the simulation results, the proposed system gives $10^{-6}$ BER at 20dB SNR.

• 한국통신학회논문지
• /
• 제31권7A호
• /
• pp.702-708
• /
• 2006

본 논문에는 초광대역 통신시스템을 위한 주파수 영역의 통계학적 채널 모델을 서술하고 있다. 채널 모렐링은 3개의 사무실 환경, 46개의 송, 수신 위치에서 얻어진 23,000개의 채널응답함수로 부터 얻어졌다. 측정실험을 통해 얻어진 데이터를 바탕으로 주파수 변화에 따른 경로감쇄지수 변화에 대해 서술한 후 전파환경과 가시경로의 존재여부에 따른 수신신호의 확률분포모델을 연구하였다. 마지막으로는 수신된 주파수 톤에 해당하는 수신파워의 표준편차와 같은 통계적 특성들을 고찰하였는데, 가시경로가 존재하는 경우에는 송, 수신기 사이의 거리가 멀어지면서 표준편차 값이 커지고 그에 따라 수신 주파수 톤의 파워가 평균 수신파워에서 일정한 범위 안에 들어올 확률이 떨어지는 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.51-51
• /
• 2009

In this paper, we proposed GaN trench Static Induction Transistor(SIT). Because The compound semiconductor had superior thermal characteristics, GaN and SiC power devices is next generation power semiconductor devices. We carried out modeling of GaN SIT with 2-D device and process simulator. As a result of modeling, we obtained 340V breakdown voltage. The channel thickness was 3um and the channel doping concentration is 1e17cm-3. And we carried out thermal characteristics, too.

• 한국전기전자재료학회논문지
• /
• 제22권12호
• /
• pp.1018-1022
• /
• 2009

In this paper, we proposed GaN trench Static Induction Transistor(SIT). Because The compound semiconductor had superior thermal characteristics, GaN and SiC power devices is next generation power semiconductor devices. We carried out modeling of GaN SIT with 2-D device and process simulator. As a result of modeling, we obtained 340 V breakdown voltage. The channel thickness was 3 urn and the channel doping concentration is $1e17\;cm^{-3}$. And we carried out thermal characteristics, too.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.194-197
• /
• 1995

In this study, we performed a modeling for $K^{+}$ ion-exchanged diffused channel waveguide and waveguide-type optical coupler by WKB(Wentzel-Kramer-Brillouim) dispersion equation, field distribution equation of mode and coupled mode theory, and examined the optical-power-dividing of the optical coupler fabricated by using the modeling condition. The optical-power-dividing was observed at the waveguide-type optical coupler with 3[$\mu\textrm{m}$] line-width, 6[$\mu\textrm{m}$] space between channel waveguides, and 3[mm] interaction length.

• 대한전기학회논문지
• /
• 제38권3호
• /
• pp.237-246
• /
• 1989

A sliding memory covariance circular lattice (SMC-CL) filter and an efficient ARMA modeling method using the SMC-CL filter are presented. At first, SMC-CL filter is derived based on the geometric approach. Then ARMA process is converted into 2 channel AR process, and SMC-CL filter is applied to it. The structure of SMC-CL filter becomes simpler in case of ARMA modeling due to the whiteness of a driving input process. The parameters of ARMR process can be obtained by the Levinson recursions from the PARCOR coefficients of the second channel of the filter. Computer simulations are performed to show the effctiveness of the proposed algorithm.

• Journal of Communications and Networks
• /
• 제5권4호
• /
• pp.319-327
• /
• 2003

We consider the problem of low-sampling rate high-resolution channel estimation and timing for digital ultrawideband (UWB) receivers. We extend some of our recent results in sampling of certain classes of parametric non-bandlimited signals and develop a frequency domain method for channel estimation and synchronization in ultra-wideband systems, which uses sub-Nyquist uniform sampling and well-studied computational procedures. In particular, the proposed method can be used for identification of more realistic channel models, where different propagation paths undergo different frequency-selective fading. Moreover, we show that it is possible to obtain high-resolution estimates of all relevant channel parameters by sampling a received signal below the traditional Nyquist rate. Our approach leads to faster acquisition compared to current digital solutions, allows for slower A/D converters, and potentially reduces power consumption of digital UWB receivers significantly.

• 한국멀티미디어학회논문지
• /
• 제12권6호
• /
• pp.824-832
• /
• 2009

Multi-radio multi-channel Wireless Mesh Network requires an effective management policy to control the assignment of channels to each radio. We concentrated our investigation on modeling method and solution to find a dynamic channel assignment scheme that is adapted to change of network traffic. Multi-path routing scheme was chosen to overwhelm the unreliability of wireless link. For a particular traffic state, our optimization model found a specific traffic distribution over multi-path and a channel assignment scheme that maximizes the overall network throughput. We developed a simple heuristic method for channel assignment by gradually removing clique load to obtain higher throughput. We also presented numerical examples and discussion of our models in comparison with existing research.

• ETRI Journal
• /
• 제41권4호
• /
• pp.426-436
• /
• 2019

In time division duplex (TDD)-based multiuser massive multiple input multiple output (MIMO) systems, the uplink channel is estimated and the results are used in downlink for signal detection. Owing to noisy uplink channel estimation, the downlink channel should also be estimated for accurate signal detection. Therefore, recently, a blind method was developed, which assumes the use of a linear high-power amplifier (HPA) in the base station (BS). In this study, we extend this method to a scenario with a nonlinear HPA in the BS, where the Bussgang decomposition is used for HPA modeling. In the proposed method, the average power of the received signal for each user is a function of channel gain, large-scale fading, and nonlinear distortion variance. Therefore, the channel gain is estimated, which is required for signal detection. The performance of the proposed method is analyzed theoretically. The simulation results show superior performance of the proposed method compared to that of the other methods in the literature.