• Journal of computational fluids engineering
• /
• v.21 no.3
• /
• pp.98-109
• /
• 2016

The flow and heat transfer characteristics of a heat exchanger having rectangular pin-fin in the flow direction have been investigated numerically. On the bottom plate, the convective boundary conditions for the hot side was given, and the fins were arranged in a channel-type geometric model using the periodic boundary condition in the span-wise direction. Three-dimensional numerical calculations for the flow and conjugate heat transfer problem were conducted using SIMPLE algorithm and $k-{\varepsilon}$ turbulence model. For the slanted pin-fin models, it was found that the downward cooling flow is generated due to the downward pressure gradient component, which can enhance the heat transfer performance near the bottom surface and the fin stem region. Four different inclined angles were considered in the Reynolds number range of 13,500-55,000. The aero-thermal performance of the slanted pin-fin heat exchangers, such as the volume and area goodness factors, were summarized and compared with the baseline plate-fin type heat exchanger quantitatively.

• The Journal of Society for e-Business Studies
• /
• v.18 no.2
• /
• pp.81-93
• /
• 2013

Remote user authentication is a method, in which remote server verifies the legitimacy of a user over an common communication channel. Currently, smart card based remote user authentication schemes have been widely adopted due to their low computational cost and convenient portability for the mutual authentication. 2009 years, Wang et al.'s proposed a dynamic ID-based remote user authentication schemes using smart cards. They presented that their scheme preserves anonymity of user, has the feature of storing password chosen by the server, and protected from several attacks. However, in this paper, I point out that Wang et al.'s scheme has practical vulnerability. I found that their scheme does not provide anonymity of a user during authentication. In addition, the user does not have the right to choose a password. And his scheme is vulnerable to limited replay attacks. In particular, the parameter y to be delivered to the user is ambiguous. To overcome these security faults, I propose an enhanced authentication scheme, which covers all the identified weakness of Wang et al.'s scheme and an efficient user authentication scheme that preserve perfect anonymity to both the outsider and remote server.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.2
• /
• pp.140-147
• /
• 2017

This paper describes the design and implementation of previously developed PMU (Power Monitoring Unit) for LiPB (Lithium-ion Polymer Battery) that is electric propulsion used as unmanned aerial vehicle's power source. Improved PMU provides stable voltage and current to various sensors and elctric motors necessary during flight. Voltage and current monitoring function that is measured by improved PMU more precisely be enhanced and the monitoring channel and temperature sensor is added. To verify the improved performance of the equipment, it is integrated to electric propulsion system of unmanned aerial vehicle. PMU is calibrated through the ground test. And PMU's performance is checked through the flight test.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.5
• /
• pp.185-196
• /
• 2015

In a study of the existing Collaboration, U-I Collaboration linkage(LINK) has a width of the various channels through continuous mutual cooperation by the path-dependency. U-I Collaboration linkage(LINK) through the various channels is more powerful, whereas this increase trade-related barriers. In other words, It has been discussed in many literatures about the U-I Collaboration linkage(LINK). However, relatively a study on the factor of the barrier about U-I Collaboration linkage(LINK) is a minority. Given the importance of policies to establish an association of industry-university cooperation and support system, the lack of research on the obstacles to U-I Collaboration linkage(LINK) will be a serious obstacle for designing effective policies. This paper examines the existing literature about the width of mutual cooperation and the barrier of U-I Collaboration, analyze to lower the barrier of U-I cooperation through POB(Positive Organization Behavior) of university administration. In conclusion, we would like to suggest the policy implications.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.539-546
• /
• 2010

In this paper, lattice Boltzmann method(LBM) results for a laminar flow in a microchannel with rough surface are presented. The surface roughness is modeled as an array of rectangular modules placed on the top and bottom surface of a parallel-plate channel. The effects of relative surface roughness, roughness distribution, and roughness size are presented in terms of the Poiseuille number. The roughness distribution characterized by the ratio of the roughness height to the spacing between the modules has a negligible effect on the flow and friction factors. Finally, a significant increase in the Poiseuille number is observed when the surface roughness is considered, and the effects of roughness on the microflow field mainly depend on the surface roughness.

• Journal of Korea Water Resources Association
• /
• v.46 no.9
• /
• pp.885-896
• /
• 2013

SEMMA (Soil Erosion Model for Mountain Areas) should be revised to apply on mountain watershed of large scale. In this study, the basic structure of original SEMMA and methods to calculate main parameters are reviewed and the revised parameters are presented to expand a range of application. SEMMA-Ic is new model revised by a rate of vegetation cover which is substituted for index of vegetation structure to use specially NDVI for large scale areas. The correlation coefficient and the Nash-Sutcliffe simulation efficiency for the revised model decreased rather than those of original model. However the evaluation of the revised model on watershed showed the approximate simulation with measured sediment yield and the underestimated simulation when sediment yield is large. The additional research for channel erosion is needed so that soil erosion model for hillslopes is used to estimate sediment yield from a watershed.

• Journal of Korea Water Resources Association
• /
• v.48 no.11
• /
• pp.957-967
• /
• 2015

It was reviewed for the 2D numerical simulations to evaluate the effects of flood control by detention basin, even if stage-discharge relationships for the side weir were not known. A 2D depth-integrated numerical model was constructed by the application of the finite volume method to the shallow water equations as a numerical method and the introduction of an approximate Riemann solver for the accurate calculation of fluxes. Results by the model were compared with those by the laboratory test for the cases of free overflow and submerged flow over a side weir between the channel and storage. The difference between simulated and measured discharge coefficients for the case of free overflow is very small. In addition, the results by simulations were in good agreement with those by experiments for the submerged flow over a side weir and its mechanism was reproduced well. Through this study the discharge coefficients of side weirs can be accurately determined by the 2D numerical model and a considerable degree of accuracy can be achieved to evaluate the effect of flood defenses by detention basins. Thus, it will be expected to apply this model practically to the plan of detention basins, the evaluation of design alternatives, or the management of the existing ones.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.624-634
• /
• 2008

The mobile station which is about to do handover in IEEE 802.16e networks scans its neighboring base station channels to decide its next target base station. However, due to the lack of location information of its subscribers, the serving base station cannot provide any reliable candidate channel which is actually attachable by the scanning mobile stations, which makes the mobile station suffer from the long scanning time. Sometimes, long scanning time may cause the degradation of quality of service due to repeatable scan-duration or failure to start the handover procedure in time. To overcome these problems, in this paper, we propose a new protocol so called fast group scanning scheme, in which multiple mobile stations form a group to scan their neighboring base station channels simultaneously. Main contribution of this proposal is to find and decide a reliable target base station within a short scanning time. The fast group scanning scheme can be deployed to the cell network of the serving base station with a dynamic neighboring base station list management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1620-1631
• /
• 2013

This study is to investigate a case study how effect of brand success upon purchase satisfaction and brand loyalty in co-brand of agriculture goods, that is GOODTRAE in korea. specifically this study conceptualizes that brand success factors affect satisfaction which try to buy a specific brand agricultural product. and that purchase satisfaction to GOODTRAE influence brand loyalty which leads to customer relationship management. In these brand success factors and brand loyalty relationship, purchase satisfaction of brand would have the mediating role. In the empirical analysis, we found that marketing, market environment, product, interorganizational cooperation, technology capability of brand success factors would affect purchase satisfaction of brand. Hypothesis what is left is not supported. I verified the assumption that brand purchase satisfaction of agriculture would affect consumer's loyalty and the result supported that assumption of it. and we found that market environment, consumer's factors, employee's & CEO's commitment, interorganizational cooperation, and technology capability of brand success factors would influence brand loyalty.

• Journal of Korean Society of Rural Planning
• /
• v.26 no.1
• /
• pp.89-99
• /
• 2020

This study was conducted as a basic research to create a sound and vital ecological environment in the city compared to the appearance characteristics of Gap stream(G-stream), which are the main stream of Banseok stream(B-stream), by analyzing the characteristics of waterbirds, including Wild Spot-billed Duck (S-Duck), that live in B-stream built as ecological stream. The waterbird survey was conducted by the line census for 3.2km, Jukdong-bridge to Jamiseon-bridge, from January to August 2018. The analysis of the survey was conducted with Relative species density(RD) of the emerging waterbird species, the Species diversity and Density Per Unit area for 100㎡(DPU). The waterbird survey results of B-stream was conducted 65 times. The five types of water birds that appeared during the survey were Spot-billed Duck(Anas poecilorhyncha), Teal(Anas crecca), Little Egret(Egretta garzetta), Great Egret(Egretta alba), and Grey Heron(Ardea cinerea). As a result, for S-Duck at B-stream, RD was 89.9%, monthly species diversity was simple as 0.3801 in January, 0.5943 in February and 0.3501 in August. The DPU of the S-Duck was 0.165/100㎡ in the B-Stream survey section which was 4.9 times higher than the main stream section, G-stream. The non-freezing zone of the city's small stream is expected to play an important role as a winter stop for wild birds such as S-Duck during the freezing period of the huge stream. For this reason, considering the ecological characteristics of wild waterbirds such as S-Duck when creating ecological stream, a: space and linear selection of waterways which can minimize the impact of natural enemy and increasing the number of walkers, b: management water-friendly plants in the low flow channel, c: arrangement walking-bicycle road will be necessary.