• 전기학회논문지
• /
• 제56권9호
• /
• pp.1589-1595
• /
• 2007

This paper suggests the advanced reliability assessment tool for railway signaling Hot-Standby sparing system. Existing reliability assessment for Hot-Standby sparing system controller is done by using single module mean failure rate based on approximated Hot standby sparing system function. Although approximated Hot standby sparing system function can be applied to various Hot standby sparing system, however, it is not able to reflect the exact system structure. In this paper, we suggest the advanced reliability function by identifying changeover-related failure factors and common failure mode which is not considered in existing approximated Hot standby sparing system reliability function via developing Hot standby sparing system model for railway signaling and applying FMECA to this model. Also. we compare reliability assessment results for model system to reliability assessment for existing system.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.731-733
• /
• 1999

Distributed Control System has been used for large scale and critical system control such as aerospace industries, chemical and power plant and so on. It is very impotant factors for design of the control system to be reliable and fault-tolerant. These control systems have backup or redundant processing modules for minimizing the time of failure and improving reliability. But such methods have changeover duration from faulty module to healthy one. During that interval, feedback control loop raises bumper and performance of the system become worse. TMR(Triple Modular Redundancy) control system is one of the best reliable ones that can overcome such a mortal drawback. This paper analyzes the components of TMR system functionally and proposes practical and cost effective configuration method for turbine control of thermal power plant.

• 한국통신학회논문지
• /
• 제21권8호
• /
• pp.1989-2002
• /
• 1996

In this paper, we describe several warm standby fault-tolerant models and their operation methods applicable to telephone switching control systems which have dual module structure and need high availability. Unavailabilities of the system implemented by four different methods for each model are computed by using the Markov state model, and then are compared for system performance evaluation. As the results ofsimulations, the warm standby model with triple processors is best in the aspect of data loss, while in most cases the warm standby model with doble processors based on no standby check method provides the highest system avaiability. Periodic changeover increases the system unavailability, but the preriodic standby check on standby module decreases the system unavailability of warm standby model with a single processor and with double processors. On the other hands, the variationas of warm standby model with a single processor and with double processors. On the other hand, the variations of data recovery time and personnel recovery rate have little effect on the system unavailtability.

• 설비공학논문집
• /
• 제11권1호
• /
• pp.100-108
• /
• 1999

Variable air volume(VAV) system designed for improving interior environmental control has steadily evolved over the last 20 years. Major advantage of VAV system is that VAV technology allows a single system to provide simultaneous heating and cooling without a seasonal changeover. Research is carried out in order to study the influence on the energy consumption and ventilation performance of two kinds of office building with a mixing ventilation system. Data required for performance evaluation in these building is obtained from the central monitoring station and by measurement.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.195-198
• /
• 2005

Besides strong customer orientation, today's companies should respond increasingly to a market getting worse for securing competitiveness with a diversity of product spectrum. In these new conditions in the surrounding field of manufacturing, the changeability of manufacturing system develops more and more to the key success factor. The following contributions introduce a fast and cost-efficient concept for changeover which bases on a modular system's architecture. The modular structure of manufacturing system allows the required changing processes with limited side effects on other modules. Based on a modular concept, manufacturing systems can be easily configured and reconfigured to specific requirements.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1431-1440
• /
• 2009

A subway in Seoul has had a major role of public transportation after the opening of Seoul Subway Line 1 on August 15, 1974 and it has reached 34.7% of the transportation of Seoul citizens. The extended length of the subway system suppled with DC power in Korea is about 500km. In this system, the devices which are proper for regenerative power system are being required because of changeover from old braking and ATS signal system to regenerative braking and ATO signal system. In this paper, we reviewed the safety standards for the insulated hangers in overhead contact line. These hangers which have depended on foreign imports are being developed in Korea considering ease of demand and supply and economic effects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 D
• /
• pp.2936-2938
• /
• 2005

The deployment of multicast communication services in the internet is expected to lead a stable packet transfer even in heavy traffic as in network system environment. The core based tree scheme among many multicast protocols is the most popular and suggested recently. However, CBT exhibit two major deficiencies such as traffic concentration or poor core placement problem. so, measuring the bottleneck link bandwidth along a path is important for understanding th performance of multicast. We propose not only a definition of CBT's core link state that Steady-State, Normal-State and Bottleneck State according to the estimation link speed rate, but also the changeover of multicast routing scheme for traffic overload. In addition, we introduce anycast routing tree, a efficient architecture for construst shard multicast trees.

• 한국정밀공학회지
• /
• 제16권3호통권96호
• /
• pp.9-17
• /
• 1999

This paper presents a method of grinding and polishing automation of precision die after CNC machining. The method employs a robot system equipped with a pneumatic spindle and a special abrasive film pad. The robot program is automatically generated off-line program form a PC and downloaded to robot controller. Position and orientation data for the program is supplied form cutter contact (CC) data of NC machining process. This eliminates separate robot teaching process. This paper aims at practical automation of die finishing process which is very time consuming and suffering from shortage of workpeople. Time loss due to changeover from one product to another is eliminated by PC off-line programming exploiting appropriate NC machining data. Dextrous 6-axis robot with rigid wrist and simple tooling enables the process applicable to larger, rather complex 3 dimensional free surfaces.

• 한국시스템다이내믹스연구
• /
• 제10권3호
• /
• pp.5-23
• /
• 2009

Transportation systems around the world are difficult to maintain sustainability that, in a broad sense, is the capacity to endure. By connecting Entropy theory and systems thinking, we find the current problems and seek alternative plans. Distortions of the current transportation system to improve individual's ease and increasing traffic congestion, impose us the heavy energy consumption and will make increase whole entropy. UNEP reports are presented following three reasons that undermine the sustainabillity. The first one is that the prevalent traffic system highlight benefits of accessibility than benefits of mobility, the second, deteriorate excessive energy consumption, and the last reason is that personal vehicles has inhibited the use of public transportation. Alternative ideas to enhance the sustainable transportation system are these; (1) changeover from 'Ease of movement' to 'space efficiency', (2) evolving the smart traffic system instead of the construction or expansion of the road and (3) creating more comfortable the use of mass transportation. In addition, there are another ways that encouraging modal shift that increase traffic of goods, transport over railway lines and waterways, decongesting transport corridors and elevating technology to improve public transportation. The most importantly, we converse our cognitive process to be willing to enjoy uncomfortable and annoying life.

• 산업공학
• /
• 제5권2호
• /
• pp.29-37
• /
• 1992

An approach to Just-In-Time for small job-shop-type manufacturers is presented. This is aimed at those who understand the pull production system, however, cannot afford either swift changeover in workcenters or frequent delivery to customers. First, as a production planning technique, a lot-sizing model entitled Multilevel Least Total Cost Model(MLTCM) is developed; The production order quantities of each components be those requiremensts of the end item production lot. The contribution of MLTCM is shown via simulation. Then, a framework of the Kanban operations is designed; A Production Control Kanban is introduced as a communication tool with Production Kanban in a job-shop.