• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.35-40
• /
• 2023

For the EMC test, the radiation characteristics and immunity characteristics of the EUT are measured under the condition that the EUT maintains its normal operation. For normal operation of the EUT, it is necessary to operate the EUT and monitor its status through separate equipment outside the anechoic chamber. External equipment operates and monitors the EUT through various communications such as 1553B communication, RS-485 communication, and Ethernet communication. At this time, external equipment can transmit noise through the communication line. This noise is transmitted to the LISN through the connected power cable and measured. It is also radiated through the connection terminal to the LISN. In this case, the communication line is the power line It should be designed so that noise is not transmitted through electromagnetic isolation as much as possible. In addition, noise from external equipment must be suppressed as much as possible from entering the chamber through the communication line. In this paper, external EUT test equipment applied for EMC test It explains the considerations in the design and manufacture of the design and explains the satisfaction of the design through tests including CE and RE.

• Journal of Biosystems Engineering
• /
• v.32 no.3
• /
• pp.179-189
• /
• 2007

Most of the seeds of cucurbitaceous rootstock species used for grafting were mainly sown by hand. This study was carried out to develop an on-line discriminating algorithm of seed direction using machine vision and an automatic seeding system. The seeding system was composed of a supplying device, feeding device, machine vision system, reversing device, seeding device and system control section. Machine vision was composed of a color CCD camera, frame grabber, image inspection chamber, lighting and personal computer. The seed image was segmented into a region of seed part and background part using thresholding technique in which H value of HSI color coordinate system. A seed direction was discriminated by comparing position between the center of circumscribed rectangle to a seed and the center of seed image. It took about 49ms to identify and redirect seed. Line-up status of seed was good the more than 95% of a sowed seed. Seeding capacity of this system was shown to be 10,140 grains per hour, which is three times faster than that of a typical worker.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.2
• /
• pp.76-84
• /
• 2009

In this review an attempt is made to give the background to the current trends in foreign developments in the ceramic matrix composites for space vehicles. The lightweight and high temperature specific modulus properties of ceramic composites have continued to develop for designing advanced propulsion structures and for increasing space vehicle performances. Those applications require advanced materials with good resistance to high temperatures, to oxidation environments and to mechanical stresses. The advantages of ceramic matrix composites are the low specific weight, the high specific strength over a wide temperature ranges, and their good damage tolerance compared to tungsten, pyrographites and polycrystalline graphites. Due to these advantages ceramic matrix composites are currently used in rocket engine chamber, nozzle, solar array, radar antenna, mirror support structures, hypersonic leading edge articles, heat shields, reentry vehicle nose tips, and radiators for spacecraft. Various processes are discussed together with examples of current application so that some of the advanced technologies can be possibly applied to Korean space technology.

• Korean Journal of Veterinary Service
• /
• v.40 no.4
• /
• pp.287-292
• /
• 2017

A five-year-old, male, Great Dane weighing 107 kg was presented with anorexia, abdominal distension, and dyspnea for 5 days. Physical examination, blood works, radiography, electrocardiography (ECG), and echocardiography were performed. Based on severely low fractional shortening (FS) and marked four chamber enlargement in echocardiography, continuous atrial fibrillation and occasional ventricular premature complex (VPC) on ECG, the dog was diagnosed as dilated cardiomyopathy (DCM) concurrent with congestive heart failure. Pleural effusion and ascites were modified transudate. In accordance with DCM scoring system recommended by European Society of Veterinary Cardiology (ESVC), DCM score was 13/15 in this case. Concentrations of cTnI and NT-pro-BNP were 1.0 ng/mL and 693 pmol/L, respectively. Since the former and the latter were remarkably high values, it was certain that the patient had grave prognosis. Intensive care was performed for the dog and the clinical signs as well as the radiographic abnormalities were resolved. However, when he presented serious dyspnea again at 25 days post therapy, the dog was dead. In case of canine DCM, the scoring system for the diagnosis and cardiac biomarkers including NT-pro-BNP and cTnI could be useful to advise owners on the status and prognosis of their dog with DCM.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1230-1235
• /
• 2019

In this paper, we have developed sensor composited heater of 2-pin, and unified the fuel filter. In order to evaluate the performance of the 2-pin sensor composited fuel heater, we have make of the low temperature fluidity system. The one measure and analysis the electrical and oil flow quantity characteristics at an input and out port of 2-pin sensor composited fuel heater. Especially, in the characteristics verification elements of the proposed goods, we use the test chamber for the temperature variable and oil flow quantity test, and designed an embedded system for interfacing an engine. By interfacing both user and the system, it support an experimental and date gathering function in 2-pin sensor composited fuel filter. And then test the temperature, oil pressure, electrical characteristics and oil flow quantity in variable status from - 30 ℃ to + 80 ℃. These can help us to determine the quality and performance of elementary goods.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.21-34
• /
• 2011

In this study, researches on the development of country specific greenhouse gas measurement and sampling methods from the livestock sector were reviewed. Research on greenhouse gas emission factors was started in early 2000 but was not actively involved in the development of livestock sector based emission factor: since 2009, works are underway for the development of livestock sector based emission factor. Most of the research on greenhouse gas emission in the field of animal studies were done by National Institute of Animal Science, because of the uniqueness of the research laboratories. Methods of emission measurement are still not internationally certified and therefore, measurement and sampling methods for Korea livestock sector are being studied, consulting the worldwide research trends. Flux chamber method are commonly using in Korea for green house gas emission factors measurement. In recent years, continuous measurement of the microclimate was introduced to measure greenhouse gases from livestock manure storage facilities and the micrometeorology method should be adapted as recommended by Intergovernmental Penal on Climate Change (IPCC) Guideline.

• The Journal of Korea Assosiation for Disability and Oral Health
• /
• v.13 no.1
• /
• pp.14-18
• /
• 2017

X-linked dominant hypophosphataemic rickets(XLHR) is a hereditary disease generally transmitted as an X-linked dominant trait. Oral manifestations include poorly mineralized dentin, enlarged pulp chambers and root canals, early tooth loss. Also, spontaneous dental abscesses could occur in the absence of a history of trauma or caries. This report describes the clinical finding and dental treatment of a child, who came to the hospital for treatment caries but was refered to pediatrics because the child showed clinically short of status, bow-leg and radiographically enlarged pulp chamber and canal, there as diagnosed as XLHR. After the diagnosis, 13 years follow-up and treatment were performed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3251-3259
• /
• 2014

This paper presents experimental and analytical research results to predict nonlinear flexural behavior of corroded reinforced concrete beams. For this purpose, a series of test and an analytical simulation using the Maaddawy's model were carried. Test specimens of total 12 RC beams were placed in accelerated corrosion status using salt water spray test chamber for 5 months and 10 months, after they were preloaded up to 30% and 60% of the maximum load corresponding to nominal flexural strength. The test results showed that flexural strength and ductility decreased to 5.4% and 43% at the most respectively due to breakdown of bond at the steel-concrete interface. Comparative study between the analytical predictions and the experimental results showed that the Maaddawy's model can be applied to predict a real corroded RC flexural members.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.70-85
• /
• 2016

This study is to search for the significance of Taesil (Placenta Chamber) of royal family in the light of local history by examining the background that Yecheon area had been selected as building site of Taesil of Joseon and Goryeo dynasties and local correlation. In this study, Taesil in Yecheon area was formed at the area between Mt. Sobaek and Geumdangsil village which was promoted with the support of the royal family and given the responsibility of preserving Taesil as soon as Taeju (Owner of Placenta) was enthroned. It is because the formation of Taesil of royal family was an important event in the region, which strengthened the status of the region with the enthronement of Taeju. As shown in the case of Deposed Queen Lady Yun, Taesil of royal family was selected in accordance with the birthplace of Taeju and the relationship between the relevant area and royal family. Also as in the Case of King Jeongjo, this study says that the selection of Taesil site could be considered as the object of filial piety.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.655-662
• /
• 2016

This study proposes that a diving supervisor, who can perform the role of both a field manager and a supervisor, be introduced in the national qualification system. The goal was achieved by surveying the general status of the commercial diving sector, including the statistics of an underwater construction company, commercial diving equipment operation condition, diver working hours, diver supply and demand status, and underwater construction market size. The national qualification and national competency standard (NCS) systems were also analyzed to deduce the role definition and work scope of the diving supervisor. Consequently, the following proposition is made: the diving supervisor should be an "on-site manager with the highest job skill in the commercial diving field, who can perform the on-site process management as well as guide, supervise, and educate project participants and serve as an intermediary between the contractor and the workers." The responsibilities of the diving supervisor are proposed to include "diving planning and operation of the diving team," "diving with surface-supplied air and mixed-gas diving system," "chamber operation," "underwater construction," and "ship salvage." The persistent issues in commercial diving sectors, such as diver career development, management, and worker supervision, are expected to be largely resolved with the introduction of this qualification.