• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.332-345
• /
• 2023

Objectives: We examined the association of hearing with cardio-metabolic diseases, dyslipidemia, hypertension and diabetes mellitus according to the personal and occupational characteristics of workers exposed to noise. Methods: The subjects of the study were 237,028 workers who underwent 2, 3, and 4 kHz airway pure tone audiometry in 2015 and who underwent clinical tests to diagnose cardiovascular-metabolic diseases. Cardiovascular-metabolic diseases were defined using reference values for respective items including blood pressure (systolic/diastolic), fasting blood glucose, cholesterol, and triglycerides. The airway pure tone hearing threshold of 2, 3, and 4 kHz, the average threshold of 2-3-4 kHz, and the hearing loss by the average threshold of the primary examination were distinguished. Results: Workers with cardiovascular-metabolic disease had significantly higher average hearing thresholds and higher rates of hearing loss. Logistic regression analysis, which adjusted for demographic variables of gender and age and occupational variables such as workplace size, industry, and type of work, and cardiovascular-metabolic disease as independent variables, showed that the odds ratio of hypertension to hearing loss in the mid-frequency was 1.239 (95% confidence interval: 1.118-1.374). For hypertension was 1.159 (1.107-1.214) and for diabetes it was 1.166 (1.104-1.230) for hearing loss in the high-frequency. Hearing loss measured by mean hearing was 1.178 (1.105-1.256) for hypertension and 1.181 (1.097-1.271) for diabetes. Conclusions: Cardiovascular-metabolic diseases in noise-exposed workers are associated with an increased risk of hearing loss and should be accompanied by bio-monitoring of cardiovascular-metabolic diseases in addition to auditory surveillance.

• Korean Journal of Optics and Photonics
• /
• v.23 no.1
• /
• pp.12-16
• /
• 2012

In the paper, we fabricated a Ni master with $45^{\circ}$-mirror structures for flexible waveguide fabrication. The flexible waveguide films with embedded $45^{\circ}$-angled mirrors at the waveguide ends were successfully fabricated using a UV-imprint process. Next, in order to enhance the reflectivity of the mirrors, Ni(3 nm)-Au(200 nm) bilayers were evaporated on the $45^{\circ}$-angled facets through a locally opened thin mask using an electron beam evaporator. We measured propagation loss, bending loss, mirror loss and bending reliability of the fabricated waveguide.

• Asian-Australasian Journal of Animal Sciences
• /
• v.33 no.7
• /
• pp.1180-1190
• /
• 2020

Objective: To develop healthier comminuted meat products to meet consumer demand, the gel properties, rheological properties, microstructure and water distribution of pork meat batters formulated with various amounts of bamboo shoot dietary fiber (BSDF) were investigated. Methods: Different levels of BSDF (0% to 4%) were added to pork batters, and the pH, color, water-holding capacity, texture and rheological properties of pork batters were determined. Then, pork batters were analyzed for their microstructure and water distribution using scanning electron microscopy (SEM) and low-field nuclear magnetic resonance (LF-NMR). Results: Compared with the control, BSDF addition into meat batters showed a significant reduction in L^*-value and a significant increase in b^*-value (p<0.05). BSDF addition of up to 4% reduced the pH value of pork batters by approximately 0.15 units; however, the cooking loss and expressible water loss decreased significantly (p<0.05) with the increased addition of BSDF. The hardness and gel strength were noticeably enhanced (p<0.05) as the content of BSDF increased. The rheological results showed that BSDF added into pork batters produced higher storage modulus (G') and loss modulus (G") values. The SEM images suggested that the addition of BSDF could promote pork batters to form a more uniform and compact microstructure. The proportion of immobilized water increased significantly (p<0.05), while the population of free water was decreased (p<0.05), indicating that BSDF improved the water-holding capability of pork batters by decreasing the fraction of free water. Conclusion: BSDF could improve the gel properties, rheological properties and water distribution of pork meat batters and decrease the proportion of free water, suggesting that BSDF has great potential as an effective binder in comminuted meat products.

• Natural Product Sciences
• /
• v.26 no.1
• /
• pp.83-89
• /
• 2020

Osteoporosis is a worldwide disease leading to significant economic and societal burdens globally. Osteoporosis is caused by unbalanced bone remodeling between the rate of osteoclast bone resorption and osteoblast bone formation. Acer tegmentosum Maxim (AT) is a traditional herbal medicine containing multiple biological activities such as anti-oxidant and anti-inflammatory purposes. However, its role in osteoporosis has not been fully studied. Therefore, we investigated whether AT has a potent inhibitory effect on osteoporosis and its mechanism through a systemic evaluation in ovariectomized (OVX) mice. OVX mice were orally administrated with the AT at doses of 50, 100, and 200 mg/kg for 10 weeks. Histological images and histomorphometry analyses were performed by H&E and Toluidine blue satin, and the expression levels of receptor activator for nuclear factor-kB ligand (RANKL), nuclear factor of activated T cells cytoplasm 1 (NFATc1), c-Fos, and matrix metalloproteinase 9 (MMP9) related to the osteoclast differentiation were investigated using immunohistochemical analysis. Administration of AT prevented bone loss and the alternations of osteoporotic bone parameters at the distinct regions of the distal femur and spongiosa region in OVX mice. Further, administration of AT increased periosteal bone formation in a dose-dependent manner. Meanwhile, AT inhibited not only the expression of NFATc1 and c-Fos, which are two major regulators of osteoclastogenesis but also reduced bone resorbed encoding expression of MMP9 and RANKL. Our results indicated that administration of AT prevented bone loss and the alternations of osteoporotic bone parameters at the distinct regions of the distal femur and spongiosa region in OVX mice. Also AT has the bone protective effect through the suppression of osteoclast and promotion of osteoblast, suggesting that it could be a preventive and therapeutic candidate for anti-osteoporosis.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1975-1978
• /
• 2004

We developed internal and external type sensor to measure ultra-high frequency (UHF) partial discharge (PD) in 170 kV gas-insulated switchgears (GIS). We also manufactured a PD-generator to verify and measure the detection sensitivity of those sensors. We measured the output power of the UHF PD sensors induced by PDs of 5 pC using the PD-generator. We measured UHF propagation loss of an 170 kV GIS for optimal arrangement of the sensors. We used swept UHF signal from a network analyzer into the GIS to measure the loss of various components of the GIS.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.367-368
• /
• 2016

10kV IGCT has been recently developed and has the potential to push wind turbine systems to higher power and voltage rating. Converters employing IGCTs need snubber and OVP circuit to limit the rate of current's rising and peak over voltage across IGCT during turn on and off state, respectively. The conventional RCD snubber which is used in such power converter dissipates a significant amount of power. In order to reduce the amount of energy lost by conventional RCD snubber, this paper proposes flyback type snubber comprising two coils wound on a magnetic core. The flyback snubber not only meets all of the IGCTs characteristics during on and off-state but also significantly saves the power loss. Modern magnetic model using permeance-capacitance analogy leads to more accurate loss analysis of flyback type di/dt snubber circuit in 3-level NPC type back-to-back VSC. In turns, the comparison between conventional and flyback type snubber yield the effectiveness of proposed snubber in wind turbine systems.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.211-214
• /
• 2005

There are emerging many eScience applications. More and more scientists want to collaborate on their investigation with international partners without space limitation by using these applications. Since these applications have to analyze the massive raw data, scientists need to send and receive the data in short time. So today's network related requirement is high speed networking. The key point of network performance is transport protocol. We can use TCP and UDP as transport protocol but we use TCP due to the data reliability. However, TCP was designed under low bandwidth network, therefore, general TCP, for example Reno, cannot utilize the whole bandwidth of high capacity network. There are several TCP variants to solve TCP problems related to high speed networking. They can be classified into two groups: loss based TCP and delay based TCP. In this paper, I will compare two approaches of TCP variants and propose a hybrid approach for high speed networking.

• Toxicological Research
• /
• v.22 no.3
• /
• pp.253-266
• /
• 2006

Bone is a dynamic tissue that is constantly being remodelled. Resolution of bone and formation of new bone are closely linked, so that bone mass remains constant. With age, this process becomes unlinked with an imbalance in bore resorption and formation that results in a net loss of bone. Especially, osteoporosis is a disease characterized by low bone mass with age. One form of aging-related primary osteoporosis is postulated with the reduction of circulating estrogen, rapid bone loss occurs as a result of enhanced bore remodelling with an excess of resorption over bore formation. The oxidative stress is also involved in the pathogenesis of osteoporosis. Oxidative stress by cytokines, such as IL-a and TNF-${\alpha}$, inhibits osteoblast function in vitro and stimulates osteoblast apoptosis resulting in an imbalance in bore remodelling. The present article reviews the current perspectives on the interaction between bone remodelling and factors such as estrogen and oxidative stress, providing an interpretation of bone diseases in a view of molecular mechanisms.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.1-7
• /
• 2008

This paper presents electromagnetic interference(EMI) suppression method applied on the direct current(DC) motor driver for power tail gate control. EMI noise is generated by the fast switching of power devices connected to electric loads. It has become a matter of concern because of the vast increase in the number and sophistication of electronic system in automotive environment. The proposed EMI reduction method is based on the principle of reducing the transient speed of power devices by changing the parameters of the driver circuit related to the power MOSFET. In this paper, power losses were calculated by loss equations and thermal simulation was used to evaluate the effect on printed circuit board. Based on these results, the DC motor driver was fabricated and tested. The proposed method can help to design a DC motor driver which allows it to obtain an acceptable compromise between power losses and EMI.

• Macromolecular Research
• /
• v.10 no.2
• /
• pp.85-90
• /
• 2002

Poly (ethylene oxide)/polylatide/poly(ethylene oxide) (PEO/PL/PEO) tri-block copolymers, which each block is connected by ester bond, were synthesized by coupling reaction of PL with PEO in the presence of pyridine. PL/PEO/PL tri-block copolymer was synthesized by ring opening polymerization of L-lactide initiated by PEO in the presence of stannous octoate. Degradation behavior of the copolymers was investigated in a pH 7.4 phosphate buffer saline (PBS) at 37$\pm$1 $^{\circ}C$. Gel permeation chromatography (GPC) and $^1$H-nuclear magnetic resonance (NMR) were used to monitor the change of mass loss, molecular weight and composition of copolymers. In hydrolytic degradation, the PEO/PL/PEO tri-block copolymer with high PEO contents affected the increase of its mass loss, and resulted in the decrease of its molecular weight as well as PEO composition. However, when PL/PEO/PL and PEO/PL/PEO tri-block copolymers had similar PEO contents, PEO/PL/PEO decreased faster in molecular weight and PEO composition than PL/PEO/PL.