• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.427-434
• /
• 2000

Hydraulic conductivity of soil-cement was measured as a function of some selected construction variables that are often encountered in practice. They are initial (or compaction) water content, delayed compaction after mixing, and repeated freezing and thawing. Sandy and clayey soils were used. The hardening agent used was a cement based soil stabilizer consisting of 80% of ordinary Portland cement and 20% of a combination of supplementary materials. Hydraulic conductivity of soil-cement with varying initial water content was, in trend, similar to that of compacted clay. Hydraulic conductivity of soil-cement decreased with increasing initial water content and reached its minimum when compacted wet of optimum water content. Pore size distributions of soil cement at different initial water contents were analyzed using mercury intrusion porosimetry. The analysis showed that dryer condition led to the formation of larger pores with lesser total pore volume; smaller pores with larger total pore volume at wetter condition. Hydraulic conductivity of soil-cement increased by orders in magnitude when specimen underwent delayed compaction of longer than 4 hours after mixing and repeated freezing and thawing.

• 전기의세계
• /
• 제25권6호
• /
• pp.74-80
• /
• 1976

The temperature rise of the mortars while are being irradiated by ultrasonic waves and immersed in a liquid medium, are measured. The mixing ratios of sand to cement are varied for the different mortars. The results of the experiment are as follows, 1. The temperature rise of the mortar is decreased as themixing ration (S/C) is increased. 2. Thd temperature rise of the specimen is increased as its length is increased. 3. The surface conditions, either smooth or rough, may not have much influence on the temperature rise of the mortar. 4. The initial slope of temperature rise may not have much effect of the viscosity of liquid. The results, describes above, appear well coincide with the theory that the temperature rise is attributed mainly to the absorption heating. Since the absorption heating of the mortars varies with the mixing ratios of sand to cement, the strength of them would be estimated by means of irradiation of ultrasonic waves on the specimen.

• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.77-84
• /
• 1986

This study was designed to compare the antimicrobial effect of the several root canal cements and to determine the duration of their activity. After Strep. sanguis 9811 was streaked on the surface of BHI agar and Plain agar, PVC tubes filled with root canal cements were applied and cultured for 48 hours, aerobically. Following results were obtained, 1. All of the examined root canal cements had antimicrobial activity with varying degree. 2. The antimicrobial activity of N2 was larger than any other root canal cements. Nogenol and Tubliseal showed the lowest activity. ZOE, AH26, Procosol and PCA cement showed the moderate antimicrobial activity. (P>0.05) 3. At one day after mixing the root canal cements, all of the root canal cements except N2 and PCA cement showed greatly reduced antimicrobial activity. 4. At three days after mixing, PCA cement showed the reduced antimicrobial activity. N2 showed the reduced activity at 7 days after mixing.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.489-492
• /
• 2005

The Purpose of this study is to develope the method for early recovery of the biodiversity in the oligotrophical costal area. The result of this study, the dissolution ratio is superior in the case which the cement coating thickness of the granular fertilizer is below 1mm. From the failure-side it is judged with the fact that appropriate to use the separate charging method and vibration compaction method. For the cases of the mixing ratio of cement coating granular fertilizer, there was not any clear tendency for the change of the strength up to 20$\%$ of the mixing ratio. However, at the 30$\%$ mixing ratio, decrease of the strength was noticed. So it can be concluded that the stability can be achieved in the range of 20$\%$ and below.

• 콘크리트학회논문집
• /
• 제23권2호
• /
• pp.203-209
• /
• 2011

시멘트 산업은 에너지 다소비형이며 석회석을 원료로 하고 있어 지구 온난화의 주범인 CO를 배출하여, 환경문제로 인해 가까운 시기에 큰 어려움을 겪을 것으로 예상되고 있다. 오늘날 첨단산업의 발전과 지구환경 문제의 심각성에 대한 인식이 증가하여 시멘트 산업에서도 다각화 측면에서 다양한 종류의 기술 등이 활성화되고 있는 시점이다. 이 연구에서는 최근에 새로이 검토되고 있는 시멘트 대체 재료로서 천연 제올라이트를 주원료로 사용한 제올라이트 시멘트 모르타르에 관한 재료적 특성을 분석하는데 목적이 있으며 그 방법으로 물($H_2O$)대신 알칼리 활성제(NaOH)를 사용하여 알칼리 경화반응을 이용한 제올라이트 모르타르를 제조하여, 강도 특성 및 적정 배합비를 구하였다. 그 결과 알칼리 활성제의 양과 경화 온도에 따른 천연 제올라이트 시멘트 모르타르의 7일 압축강도가 42 MPa로 측정되는 등 기존 시멘트보다 뛰어난 성능을 나타내는 것으로 판단되어지며, 기존 건설용 재료를 대체할 가능성이 충분히 있다고 사료된다.

• Journal of Forest and Environmental Science
• /
• 제37권1호
• /
• pp.79-89
• /
• 2021

Cement bonded boards of 10 mm in thickness were produced from the mixture of Gmelina arborea sawdust and corn cob particles. The strength and dimensional stability of cement bonded composites produced from these two mixtures were examined. A total of thirty experimental boards were produced at density level of 1,000 kg/㎥ with cement to fibre ratio of 2.5:1 and 3:1 and five (5) blending proportions of G. arborea sawdust to corn cob particles of 100:0; 75:25; 50:50; 25:75 and 100:0. The effect of the cement to fibre ratio and blending proportion on the Water Absorption (WA), Thickness Swelling (TS), Modulus of Rupture (MOR), and Modulus of Elasticity (MOE) were determined. The result indicates that as the mixing ratio of cement to fibre and blending proportion of maize cob (75%) to G. arborea (25%) increased, the thickness swelling, water absorption decreased, whereas the MOR and MOE increased. It also shows that most dimensionally stable and flexural strength boards were produced at the highest level of mixing ratios (3:1) and blending proportion of G. arborea to corn cob 25:75. However, the analysis of variance shows that TS and WA were significantly different, whereas, MOE and MOR were not significantly affected by mixing ratios and blending proportions. Finding of this study has shown that maize cob particles are suitable for cement bonded board production.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.373-376
• /
• 2008

150MPa 수준의 초고강도 콘크리트를 제조하기 위하여 프리믹스형태의 시멘트를 제조하였고, 각 시멘트의 특성별로 초고강도 콘크리트 배합특성과 재령별 강도발현 특성을 비교하였다. 실험결과 콘크리트의 배합에 소요되는 시간은 콘크리트 각 재료가 충분히 활성화되기까지 대략 5분에서 6분 사이에 콘크리트 믹싱이 완료되는 것으로 나타났다. 콘크리트의 압축강도는 재령 28일을 기준으로 7일에서는 77%, 14일에서는 87%정, 56일에서는 약 102%정도로 나타났으며, 150MPa 정도의 초고강도 콘크리트 제조를 위하여 OPC는 54%내외, 슬래그미분말은 25${\sim}$30%, 실리카흄은 10${\sim}$15% 정도의 범위에서 프리믹스시멘트를 제조하여 콘크리트 배합에 적용할 수 있을 것으로 판단된다. 그리고 초고강도 콘크리트는 매우 큰 점성을 가질 수 있어 이러한 점성과 콘크리트 타설 및 작업과의 상관성을 고려하여 플로우치는 700${\sim}$750mm정도를 확보하여야 할 것으로 판단된다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.383-393
• /
• 2006

This paper investigates strength characteristics and stress-strain behaviors of geogrid mixing reinforced lightweight soil. The lightweight soil was reinforced with geogrid in order to increase its compressive strength. Test specimens were fabricated by various mixing conditions including cement content, initial water content, air content and geogrid layer and then unconfined compression tests were carried out. From the experimental results, it was found that unconfined compressive strength as well as stress-strain behavior of lightweight soil were strongly influenced by mixing conditions. The more cement content that is added to the mixture, the greater its unconfined compressive strength. However, the more initial water content or the more air foam content, the less its unconfined compressive strength. It was observed that the strength of geogrid reinforced lightweight soil was increased due to reinforcing effect by the geogrid for most cases except cement content less than 20%. In reinforced lightweight soil, secant modulus $(E_{50})$ was increased as the strength increased due to the inclusion of geogrid.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.372-382
• /
• 2006

The DCM(Deep Cement Mixing) Method was introduced domestically in 1985 and has been applied widely to improve stability, increase bearing capacity and reduce settlement of the structure. It has been only performed by the combined equipment to improve the soft ground in coastal areas. But it has qualify-control problems such as interference of waves and improving depth, etc. Therefore DCM Barge of specialist equipment, named by Dong Ji Ho, was equipped with three mixing shafts with four rod and installed GPS system In itself, had been developed in 2005 for the purpose of solving the above problems. This paper represents about Dong Ji Ho's qualify-control system as well as it's first domestic application to in-situ trial test and the original design of the Ulsan breakwater site.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.133-136
• /
• 2009

This study analyzes the mixing and basic characteristics of concrete according to the unit quantity and mixing method of ternary blended cement and the results of this study can be summarized as follows. In the case of the premixed cement (hereafter referred as POBF) of POBF135, it satisfies the target level of fluidity and air content in which it shows relatively small bleedings even though it represents the latest initial and final setting. Also, although the POBF135 represents small initial strength, it shows an increase in the strength according to the increase in aging. In addition, it shows the lowest temperature in the POBF135. As a result, it can be seen that the POBF135 indicates the most optimal mixing subject to considering the aspect of fluidity, compressive strength, and heat of hydration in general figures.