• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.164-164
• /
• 2007

Photodiffusion of silver into chalcogenide thin film is one of the most interesting effects that occurs in chalcogenide glass as it theatrically changes the properties of the initial material and forms a ternary. Programmable Metallization Cell(PMC) Randon Access Memory use for photodiffusion of mobile metal is based on the electrochemical growth and removal of nanoscale metallic pathway in thin film of solid electrolyte. This paper investigates the annling properties on Ag-doped $Ge_{25}Se_{75}$ thin film structure and describes the electrical characteristics of PMC-RAM. The composition of the intercalation products containing Ag is confirmed using X-ray diffraction which shows the formation of Ag-doped $Ge_{25}Se_{75}$.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.98-107
• /
• 2011

In this paper, we propose the location determination system of an agent mobile device using the information provided by the WLAN(Wireless LAN) infrastructure. This system is configured as a typical ESS(Extended Service Set)-type WLAN structure with real-time location positioning engine and thru AP(Access Point) controller. The positioning engine collects the information of agent devices using SNMP(Small Network Management Protocol) thru AP controller and utilize those information as Cell ID. for LBS(Location Based Service). In the result of a real office environment implementation, the average success rate of inter-AP roaming is measured to 62.5% and the duration time of the device information update within the AP is average of 11 second of time, which means this system is adaptable to the location based service of above average accuracy but somewhat less urgency.

• Journal of Communications and Networks
• /
• v.2 no.1
• /
• pp.5-17
• /
• 2000

cdma2000 offers several enhancement as compared to TIA/EIA-95, although it remains fully compatible with TIA/EIA-95 systems and allows for a smooth migration from one to the other-Major new capability include:1)connectivity to GSM-MAP in addition to IP and IS-41 networks; 2) new layering with new LAC and MAC architectures for improved service multiplexing and QoS management and efficient use of radio resource ;3) new bands and band widths of operation in support of various operator need and constraints, as well as desire for a smooth and progressive migration to cdma 2000; and 4) flexible channel structure in support of multiple services with various QoS and variable transmission rates at up to 1 Mbps per channel and 2 Mbps per user. Given the phenomenal success of wireless services and desire for higher rate wireless services. improved spectrum efficiency was a major design goal in the elaboration of cdma2000. Major capacity enhancing features include; 1) turbo coding for data transmission: 2)fast forward link power control :3) forward link transmit diversity; 4) support of directive antenna transmission techniques; 5) coherent reverse link structure; and 6) enhanced access channel operation. As users increasingly rely on their cell phone at work and at home for voice and data exchange, the stand-by time and operation-time are essential parameters that can influence customer's satisfaction and service utilization. Another major goal of cdma2000 was therefore to enable manufacturers to further optimize power utilization in the terminal. Major battery life enhancing features include; 1) improved reverse link performance (i.e., reduced transmit power per information bit; 2) new common channel structure and operation ;3) quick paging channel operation; 4) reverse link gated transmission ; and 5) new MAC stated for efficient and ubiquitous idle time idle time operation. this article provides additional details on those enhancements. The intent is not to duplicate the detailed cdma2000 radio access network specification, but rather to provide some background on the new features of cdma2000 and on the qualitative improvements as compared to the TIA/EIA-95 based systems. The article is focused on the physical layer structure and associated procedures. It therefore does not cover the MAC, LAC, radio resource management [1], or any other signaling protocols in any detail. We assume some familiarity with the basic CDMA concepts used in TIA/EIA-95.

• Journal of the Microelectronics and Packaging Society
• /
• v.30 no.3
• /
• pp.73-77
• /
• 2023

In this study, we developed a Multi-level FeRAM (Ferroelectrics random access memory) device utilizing different ferroelectric materials and analyzed its operation through C-V analysis using simulations. To achieve Multi-level operation, we proposed an MFM (Multi-Ferroelectric Material) structure by depositing two different ferroelectric materials with distinct properties horizontally on the same bottom electrode and subsequently adding a gate electrode on top. By analyzing C-V peaks based on the polarization phenomenon occurring under different voltage conditions for the two materials, we confirmed the feasibility of achieving Multi-level operation, where either one or both of the materials can be polarized. Furthermore, we validated the process for implementing the proposed structure using semiconductor fabrication through process simulations. These results signify the significance of the new structure as it allows storing multiple states in a single memory cell, thereby greatly enhancing memory integration.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.1-10
• /
• 2008

In this paper, we describe a design of a 128bit MRAM based on a new switching architecture which is Local Field Switching(LFS). LFS uses a local magnetic field generated by the current flowing through an MTJ. This mode reduces the writing current since small current can induce large magnetic field because of close distance between MTJ and the current. It also improves the cell selectivity over using conventional MTJ architecture because it doesn't need a digit line for writing. The MRAM has 1-Transistor 1-Magnetic Tunnel Junction (IT-1MTJ) memory cell structure and uses a bidirectional write driver, a mid-point reference cell block and a current mode sense amplifier. CMOS emulation cell is adopted as an LFS-MTJ cell to verify the operation of the circuit without the MTJ process. The memory circuit is fabricated using a $0.18{\mu}m$ CMOS technology with six layers o) metal and tested on custom board.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.04a
• /
• pp.83-85
• /
• 2016

C-RAN (Cloud Radio Access Network) structure is the most popular approach for 5G stander, it employs CoMP (Coordinated Multiple Points Transmission/Reception) to enhance frequency utilization and increase throughput for cell-edge users. C-RAN mainly includes two parts: baseband units (BBU) and remote radio heads (RRH). In this paper we propose a new resource block allocation (spectrum allocation) scheme by the permutation and combination of BBUs, and we also use the CoMP (Coordinated Multiple Points Transmission/Reception) technique according to the different environment to improve the spectrum utilization and reduce resource waste in different environment. The simulation results expound that the scheme significantly enhances throughput and improves the spectrum utilization.

• Journal of Korean Institute of Industrial Engineers
• /
• v.34 no.2
• /
• pp.223-234
• /
• 2008

Mobile multi-hop relaying (MMR) technology is being considered as a promising solution capable to enhance coverage, user throughput, and system capacity of the current wired backbone dependent wireless access networks. Since the relaying nodes do not need a wired backbone access, MMR technology offers easy and low-cost deployment, flexible cell planning, and adaptive traffic handling performance. In this paper, we investigate performance and cost effectiveness of the MMR technology deployment in the IEEE802.16j based WiBro/WiMAX systems. We first introduce standardization activities and research issues of MMR WiBro/ WiMAX systems. Since the coverage extension problem may occur in metropolitan areas as well as suburban or rural areas where user density is relatively low or moderate, we introduce several MMR topologies and analyze cost-effectiveness of MMR based coverage extension with respect to the user traffic density. Then, we argue cost effect on MMR technology deployment and throughput performance, Finally, we introduce further study issues including sectorized base station based MMR deployment approaches and the single and multi-frame structure MMR approaches.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.3
• /
• pp.55-62
• /
• 2009

Location based Services in the ubiquitous computing environment, namely u-LBS, use very large and skewed spatial objects that are closely related to locational information. It is especially essential to achieve fast search, which is looking for POI(Point of Interest) related to the location of users. This paper examines how to search large and skewed POI efficiently in the u-LBS environment. We propose the Dynamic-level Grid based R-Tree(DGR-Tree), which is an index for point data that can reduce the cost of stationary POI search. DGR-Tree uses both R-Tree as a primary index and Dynamic-level Grid as a secondary index. DGR-Tree is optimized to be suitable for point data and solves the overlapping problem among leaf nodes. Dynamic-level Grid of DGR-Tree is created dynamically according to the density of POI. Each cell in Dynamic-level Grid has a leaf node pointer for direct access with the leaf node of the primary index. Therefore, the index access performance is improved greatly by accessing the leaf node directly through Dynamic-level Grid. We also propose a K-Nearest Neighbor(KNN) algorithm for DGR-Tree, which utilizes Dynamic-level Grid for fast access to candidate cells. The KNN algorithm for DGR-Tree provides the mechanism, which can access directly to cells enclosing given query point and adjacent cells without tree traversal. The KNN algorithm minimizes sorting cost about candidate lists with minimum distance and provides NEB(Non Extensible Boundary), which need not consider the extension of candidate nodes for KNN search.

• Information and Communications Magazine
• /
• v.15 no.7
• /
• pp.75-94
• /
• 1998

In this paper, HFC CATV networks are introduced. HFC CATV networks are currently considered as a most effective and plausible solution for subscriber access networks in the information superhighway, among others such as ADSL and B-WLL. The advantages of HFC CATV networks include its broad upstream and downstream channel bandwidths, much wider than PSTN's and its readiness. The HFC CATV networks are already well spread among the general subscribers in Korea. This fact will shorten the installation period and significantly reduce its cost. In addition, The structure and channel environment of the HFC CATV networks are introduced. At the same time, in this paper included are major problems in the HFC CATV networks and the solutions for these problems. Also discussed are data transmission, medium access control, IEEE802.14, and MCNS for standardizations. Moreover, additional telecommunications service activities in both Korea and other countries, using HFC CATV networks are also included. The topics which are covered in detail are the ones such as interoperation between HFC CATV networks and trunk line and the digital transmission performance test for the CATV networks. In the performance test, it is concluded that HFC CATV networks can satisfy the QoS for various additional services if the number of the subscribers in a cell is limited to less than 500 and other minor requirements are satisfied. Based on all these discussions and conclusions, HFC CATV networks are suggested in this paper for the subscriber access networks of the so called information superhighway.

• Journal of KIBIM
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2015

Modular technology has become a major issue of the construction industries to enhance their productivity. Modular bridge construction generally requires the data exchange between the contractors, designers, fabricators and constructors. Therefore, a readily accessible information model interface module based on BIM technology is essential for their communication during a project life-cycle. In this study, BIM based information model interface module for a modular pier was developed. For the information models, the PBS(Product Breakdown Structure) and LOD(Level of Development) were defined. Next, all components of a modular pier were conducted by the parametric modeling technique, and then 3D cell library interface was developed. An nterface module was also developed using VBA(Visua basic Application) for exchanging a data from 3D model library to other softwares such as Microstation, AutoCad and Excel and was connected with MS Access database. The developed information model interface module would improve the design quality of the modular pier and reduce the time and cost for design. Updated 3D information models could be utilized for the fabrication, assembly, and construction process for modular piers.