• 만화애니메이션 연구
• /
• 통권16호
• /
• pp.165-178
• /
• 2009

이전에 발표한 "실사인물의 조형성을 이용한 캐릭터 제작 연구"에서 기본 토대가 2D 애니메이션이었다.2008년에 개봉 상영하여 20만 이상의 관객을 끌어 모은 애니메이션은 모두 5편이고 이중 4편이 3D 애니메이션이었다. 이는 관객의 선호도가 2D에서 3D쪽으로 전이되었음을 의미한다. 따라서 본 연구는 이전 연구에서 시대적인 반영이 미진했던 부분을 보완하여 3D까지 확대 연구 할 필요성에서 출발하였다. 캐릭터를 만드는 다양한 방법 중 목소리 녹음에 참여한 배우의 조형적 요소를 이용하여 만든 2D와 3D 애니메이션 작품 중 몇 편을 선별하였다. 실사인물의 캐릭터 변형과정에서 어떤 기준이 되는 부분을 발견하고 그 기준선을 기준으로 실사인물과 캐릭터를 비교 연구를 하였다. 2D에서 적용했던 연구를 3D작품에 확대시켜 적용하는 연구를 진행하여 작지만 각각의 차이를 발견하였다. 애니메이션 기획단계에서 기존 배우의 조형성을 기대하며 캐릭터를 제작한다면 본 연구에서 나타난 2D와 3D 영화 등장인물의 변형과정 특징을 잘 살펴 캐릭터 작업에 보탬이 되기를 바란다.

• Nuclear Engineering and Technology
• /
• 제52권9호
• /
• pp.2025-2033
• /
• 2020

Signature-based safeguards (SBS) is being developed to assist tradition nuclear material accountancy methods in tracking material in pyroprocessing facilities. SBS involves identifying off-normal scenarios that would result in improper movement of material in a pyroprocessing facilities and determining associated sensor response signatures. SBS investigations are undertaken in the computational space utilizing an electrochemical transport code known as enhanced REFIN with anodic dissolution (ERAD) to calculate the affect of off-normal conditions in the electrorefiner (ER) on material movement. Work is undertaken to experimentally validate the predictions and assumptions made by ERAD for off-normal occurrences. These experiments were undertaken on a benchtop scale and involved operating an electrochemical cell at 10 separate current densities for constant current operations to deposit U and Gd at a W cathode. These experiments were then modeled using ERAD to compare calculated predictions versus analytical experimental results it was found. It was discovered both the experimental and calculated results reflect a trend of increased codeposition of U and Gd with increasing current density. ERAD was thus demonstrated to be useful for predicting trends from anomalous operation but will require further optimization to be utilized as a quantitative design tool.

• 조명전기설비학회논문지
• /
• 제27권11호
• /
• pp.57-68
• /
• 2013

The market for distributed power generation based on renewable energy is increasing, particularly for standalone mini-grid applications in developing countries with limited energy resources. Stand-alone power systems (SAPS) are of special interest combined with renewable energy design in areas not connected to the electric grid. Traditionally, such systems have been powered by diesel engine generator sets (DEGS), but also hybrid systems with photovoltaic and/or wind energy conversion systems (WECS) are becoming quite common nowadays. Hybrid energy systems can now be used to generate energy consumed in remote areas and stand-alone microgrids. This paper describes the design, simulation and feasibility study of a hybrid energy system for a stand-alone power system. A simulated model is developed to investigate the design and performance of stand-alone hydrogen renewable energy systems. The analysis presented here is based on transient system simulation program (TRNSYS) with realistic ventilation load of a large store. Design of a hybrid energy system is site specific and depends on the resources available and the load demand.

• 한국통신학회논문지
• /
• 제24권12A호
• /
• pp.1868-1875
• /
• 1999

무선 망에서 단말기를 호출하기 위한 일차 페이징 지역인 LAI 의 설계는 페이징 채널의 트래픽 생성과 매우 밀접한 관련이 있다. 이 논문에서는 페이징 채널을 통과하는 호 제어 및 부가 기능 메시지를 통해 IS-95 CDMA 표준에 따른 페이징 채널이 용량을 실제 운용 상황에서 발생하는 트래픽 자료를 바탕으로 분석하고자 한다. 이 분석은 페이징 채널이 처리할 수 있는 LAI 의 적정 용량(Engineered Capacity)을 통하여, 기지제어국 및 기지국 시스템의 용량에 따른 망 계획의 중요한 기준을 제공한다.

• Nuclear Engineering and Technology
• /
• 제56권5호
• /
• pp.1562-1573
• /
• 2024

This study rigorously examined uncertainty in the TMI-1 benchmark within the Uncertainty Analysis in Modeling (UAM) benchmark suite using the STREAM/RAST-K two-step method. It presents two pivotal advancements in computational techniques: (1) Development of an uncertainty quantification (UQ) module and a specialized library for the pin-based pointwise energy slowing-down method (PSM), and (2) Application of Principal Component Analysis (PCA) for UQ. To evaluate the new computational framework, we conducted verification tests using SCALE 6.2.2. Results demonstrated that STREAM's performance closely matched SCALE 6.2.2, with a negligible uncertainty discrepancy of ±0.0078% in TMI-1 pin cell calculations. To assess the reliability of the PSM covariance library, we performed verification tests, comparing calculations with Calvik's two-term rational approximation (EQ 2-term) covariance library. These calculations included both pin-based and fuel assembly (FA-wise) computations, encompassing hot zero-power and hot full-power operational conditions. The uncertainties calculated using both the EQ 2-term and PSM resonance treatments were consistent, showing a deviation within ±0.054%. Additionally, the data compression process yielded compression ratios of 88.210% and 92.926% for on-the-fly and data-saving approaches, respectively, in TMI fuel assembly calculations. In summary, this study provides a comprehensive explanation of the PCA process used for UQ calculations and offers valuable insights into the robustness and reliability of newly developed computational methods, supported by rigorous verification tests.

• 자원환경지질
• /
• 제27권2호
• /
• pp.191-199
• /
• 1994

층상대지속에 있는 3차원 물체에 의한 지자기 지전류 (MT)응답을 계산하기 위하여 적분방정식을 이용한 수치모델링법을 개발하였다. 이 방법에서는 3차원 이상체를 몇 개의 세포로 분할하여 펄스기조함수로 근사할 수 있는 전류분포로 치환한다. 층상대지를 표현하는 전기 텐서그린함수를 쓰면 행렬방정식을 유도할 수 있으며 이를 각 세포의 벡터전류에 대하여 푼다. 결국 미지의 산란장은 산란전류에 관한 전기 및 자기 텐서그린함수를 적분함으로써 얻어진다. 지표면 근처에 3차원 전도성물체가 존재할 때 2차원의 TE모드 모델링으로는 깊은 곳에 가짜의 저 비저항을 가정해야 한다. 이는 TE모드 모델링에서는 경계면 전하의 영향을 고려할 수 없기 때문이다. 그러나 긴 3차원 직방체의 가운데를 가로지르는 단연은 2차원 TM모드 아르고리즘으로 정확히 모델화할 수 있으며, 이는 정식화과정에서 경계면 전하가 고려되어 있기 때문이다. 다중 주파수에 관한 수치계산 결과 겉보기 비저항과 위상은 상호보완적인 변수라는 것이 밝혀졌다. 따라서 이들 변수는 주파수영역 MT 해석시 함께 취급되는 것이 바람직하다.

• 대한전자공학회논문지SD
• /
• 제48권7호
• /
• pp.1-9
• /
• 2011

멤리스터(Memristor)는 메모리 레지스터의 합성어로 흐른 전하량에 따라 저항이 스스로 변하고 전원이 끊긴 상태에서도 저항 상태가 기억되는 특수한 메모리 소자이다. 본 논문에서는 차세대 메모리소자로 주목받고 있는 멤리스터를 모델링하고 SPICE 시뮬레이션을 위한 behavior모델을 제시한다. 그리고 제안된 모델을 바탕으로 멤리스터 기반의 M_CAM(Memristor MOS content addressable memory)을 설계하였다. 제안된 M_CAM은 기존의 CAM에 비해서 단위 셀 면적과 평균 전력소모가 각각 40%, 96% 감소하였다. 칩은 0.13${\mu}m$ CMOS 공정에서 공급전압이 1.2V를 갖도록 설계되었다.

• Ocean Science Journal
• /
• 제42권3호
• /
• pp.153-163
• /
• 2007

This study is based on a series of numerical modeling experiments to understand the tidal circulation in the Kangjin Bay (KB). The tidal circulation in the KB is mostly controlled by the inflow from two channels, Noryang and Daebang which introduce the open ocean water into the northern part of the KB with relatively strong tidal current, while in the southern part of the KB, shallowest region of the entire study area, weak tidal current prevails. The model prediction of the sea level agrees with observed records at skill scores exceeding 90 % in terms of the four major tidal constituents (M2, S2, K1, O1). However, the skill scores for the tidal current show relatively lower values of 87, 99, 59, 23 for the semi-major axes of the constituents, respectively. The tidal ellipse parameters in the KB are such that the semi-major axes of the ellipse for M2 range from 1.7 to 38.5 cm/s and those for S2 range from 0.5 to 14.4 cm/s. The orientations of the major-axes show parallel with the local isobath. The eccentricity values at various grid points of ellipses for M2 and S2 are very low with 0.2 and 0.06 on the average, respectively illustrating that the tidal current in the KB is strongly rectilinear. The magnitude of the tidal residual current speed in the KB is on the order of a few cm/s and its distribution pattern is very complex. One of the most prominent features is found to be the counter-clockwise eddy recirculation cell at the mouth of the Daebang Channel.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.309-316
• /
• 2017

In this paper, numerical modeling is conducted to analyze the tension of an anchor line by varying the size and drag coefficient of a buoy when the trapnet is influenced by the wave and the current simultaneously. A mass-spring model was used to analyze the behavior of trapnet underwater under the influence of waves and current. In the simulation of numerical model, wave height of 3, 4, 5 and 6 m, a period of 4.4 s, and the flow speed of 0.7 m/s were used for the wave and current condition. The drag coefficients of buoy were 0.8, 0.4 and 0.2, respectively. The size of buoy was 100, 50 and 25% based on the cylindrical buoy ($0.0311m^3$) used for swimming crab trap. The drag coefficient of the trapnet, the main model for numerical analysis, was obtained by a circular water channel experiment using a 6-component load cell. As a result of the simulation, the tension of the anchor line decreased proportional to buoy's drag coefficient and size; the higher the wave height, the greater the decrease rate of the tension. When the buoy drag coefficient and size decreased to one fourth, the tension of the anchor line decreased to a half and the tension of the anchor line was lower than the holding power of the anchor even at 6 m of wave height. Therefore, reducing the buoy drag coefficient and size appropriately reduces the trapnet load from the wave, which also reduces the possibility of trapnet loss.

• The Korean Journal of Physiology and Pharmacology
• /
• 제12권5호
• /
• pp.267-274
• /
• 2008

Since first discovered in chick skeletal muscles, stretch-activated channels (SACs) have been proposed as a probable mechano-transducer of the mechanical stimulus at the cellular level. Channel properties have been studied in both the single-channel and the whole-cell level. There is growing evidence to indicate that major stretch-induced changes in electrical activity are mediated by activation of these channels. We aimed to investigate the mechanism of stretch-induced automaticity by exploiting a recent mathematical model of rat atrial myocytes which had been established to reproduce cellular activities such as the action potential, $Ca^{2+}$ transients, and contractile force. The incorporation of SACs into the mathematical model, based on experimental results, successfully reproduced the repetitive firing of spontaneous action potentials by stretch. The induced automaticity was composed of two phases. The early phase was driven by increased background conductance of voltage-gated $Na^+$ channel, whereas the later phase was driven by the reverse-mode operation of $Na^+/Ca^{2+}$ exchange current secondary to the accumulation of $Na^+$ and $Ca^{2+}$ through SACs. These results of simulation successfully demonstrate how the SACs can induce automaticity in a single atrial myocyte which may act as a focus to initiate and maintain atrial fibrillation in concert with other arrhythmogenic changes in the heart.