Nuclear Engineering and Technology

Korean Nuclear Society (한국원자력학회)
권호 표지
DOI QR코드

DOI QR Code

Lab scale electrochemical codeposition experiments for comparison to computational predictions

  • Lafreniere, Philip (Department of Nuclear Engineering, University of New Mexico) ;
  • Zhang, Chao (Department of Metallurgical Engineering, University of Utah) ;
  • Simpson, Michael (Department of Metallurgical Engineering, University of Utah) ;
  • Blandford, Edward D. (Department of Nuclear Engineering, University of New Mexico)
  • Received : 2019.01.18
  • Accepted : 2020.02.10
  • Published : 2020.09.25
Download PDF
⟨ Previous Next ⟩

Abstract

Signature-based safeguards (SBS) is being developed to assist tradition nuclear material accountancy methods in tracking material in pyroprocessing facilities. SBS involves identifying off-normal scenarios that would result in improper movement of material in a pyroprocessing facilities and determining associated sensor response signatures. SBS investigations are undertaken in the computational space utilizing an electrochemical transport code known as enhanced REFIN with anodic dissolution (ERAD) to calculate the affect of off-normal conditions in the electrorefiner (ER) on material movement. Work is undertaken to experimentally validate the predictions and assumptions made by ERAD for off-normal occurrences. These experiments were undertaken on a benchtop scale and involved operating an electrochemical cell at 10 separate current densities for constant current operations to deposit U and Gd at a W cathode. These experiments were then modeled using ERAD to compare calculated predictions versus analytical experimental results it was found. It was discovered both the experimental and calculated results reflect a trend of increased codeposition of U and Gd with increasing current density. ERAD was thus demonstrated to be useful for predicting trends from anomalous operation but will require further optimization to be utilized as a quantitative design tool.

Keywords

References

  1. H. Lee, G. Park, J.-W. Lee, K.-H. Kang, J.-M. Hur, J.-G. Kim, S.K.-T. Paek, I.-J. Cho, Current status of pyroprocessing development at KAERI, Sci. Technol. Nucl. Install. 43 (4) (2011) 317-328.
  2. B. Cipiti, F. Duran, B. Key, Y. Liu, I. Lozano, R. Ward, Modeling and Design of Integrated Safeguards and Security for an Electrochemical Reprocessing Facility, Sandia National Laboratories, Albuquerque, 2012.
  3. International Atomic Energy Agency, IAEA Safeguards Glossary, IAEA, Vienna, 2001.
  4. T. Burr, etal, Roles for process monitoring in nuclear safeguards at aqueous reprocessing plants, J. Nucl. Mater. Manag. 40 (2) (2012) 42-52.
  5. T. Burr, M. Hamada, C. Orton, Data-driven versus period-driven change detection for process monitoring, in: Proceeding of the 53rd Annual Institute for Nuclear Materials Management Meeting, 2012. Orlando.
  6. P. Lafreniere, D. Rappleye, R. Hoover, M. Simpson, E. Blandford, Application of signature-based safeguards to electrorefining and the ingot casting process, Nucl. Technol. 189 (2) (2015) 173-185. https://doi.org/10.13182/NT14-35
  7. H.E. Garcia, M.F. Simpson, W.-C. Lin, T.-S. Yoo, R.B. Carlson, Detecting Proliferation Activities via System-Centric Integration and Interpretation of Multi-Modal Data Collected from a System of Sensors, Idaho National Labs, Idaho Falls, 2013.
  8. M.F. Simpson, D. Rappleye, E.D. Blandford, H. Garcia, Signature based safeguards alternative to nuclear material accountancy, in: Annual Institute for Nuclear Materials Management Meeting, 2014. Atlanta.
  9. P. Lafreniere, R. Hoover, E. Blandford, Determination of pyroprocessing cathode processor failure modes and intregation into a signature-based safeguards (SBS) framework, in: Proceeding of INMM Meeting, 2014. Atlanta.
  10. P. Lafreniere, D. Rappleye, R. Hoover, M. Simpson, E. Blandford, Modeling nondestructive assay based signatures for application to safeguarding pyroprocessing, in: Proceedings of ICAPP, 2014. Charlotte.
  11. R. Cumberland, M.-S. Yim, Development of a 1D transient electrorefiner model for pyrprocess simulations, Transactions of the American Nuclear Society, Washington D.C., 2011.
  12. J. Lee, Y. Kang, S. Hwang, H. Lee, E. Kim, S. Park, Assesment of a hihgthroughput electrorefining concept for a spent metallic nuclear fuel-I: computational fluid dynamics analysis, Nucl. Technol. 162 (1) (2008) 107-116. https://doi.org/10.13182/NT08-A3936
  13. R. Cumberland, 1D and 3D Simulation of Electrochemical Behavior of U/UCl3 and Pu/PuCl3 in Molten Salt Systems, Thesis, Korean Advanced Institute of Science and Technology, Daejon, 2013.

Cited by

  1. Experimental Studies of Lanthanides Electro-Codeposition in Molten Salt to Evaluate a 1-D Electrorefining Computer Model vol.167, pp.14, 2020, https://doi.org/10.1149/1945-7111/abc02f