• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.111-118
• /
• 2003

Recently, environmental damage to urban area becomes serious problem due to the exhaust emissions by increasing the number of vehicle. Especially, exhaust emission from diesel vehicles are blown to be harmful to human health and environment. Photoacoustic Spectroscopy system is very useful technology for simultaneous and continuous measurement of the various components of the automotive exhaust gas. In this study, in order to reduce emission gases from automobile, we tried to develop the measurement system of Photoacoustic Spectroscopy. To improve performance of high sensitive Photoacoustic Spectroscopy system for automotive exhaust emissions, the shape of Photoacoustic Spectroscopy cell was optimized to use the flow analysis. And Exhaust emission data of the 1,500cc gasoline engine was fixed the working fluid. The characteristics of fluid flow for cell were analyzed by various conditions in detail.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1421-1423
• /
• 1996

In this study, the effect of solar cell cover glass on the solar cell performance is evaluated. Silicon solar cell (active area:4*6cm, efficiency:12.6% at AMO condition) is used for this study. ITO(Indium tin Oxide) film thickness of the ITO/AR/substrate glass/solar cell structure samples are $40{\AA}$, $60{\AA}$, $160{\AA}$, $240{\AA}$ respectively. The solar cell maximum output power on the stacking structure variations showed 465mW in the AR/ITO/substrate glass/solar cell, and minimum output power showed 403mW in the AR/substrate glass/solar cell. The maximum output power of the solar cell on the ITO thickness variations of the ITO/AR/substrate glass/solar cell showed 460mW at $40{\AA}$ then decrease output power as ITO thickness increase. For environment tests, all samples are exposed UV light in the vacuum chanber. The output power degradation of AR(UVR)/substrate glass/solar cell stacking structure is small compared with ITO/AR(UVR)/substrate glass/solar cell stacking structure.

• 전자공학회논문지
• /
• 제53권6호
• /
• pp.55-66
• /
• 2016

파워 게이팅은 반도체 칩의 누설전류(leakage current)를 감소시키는 데 효과적인 기술로 알려져 있으며, 전원 차단용 파워게이팅 셀 (power-gating cell, PGC)에서의 IR drop 증가로 인한 성능 및 신뢰성 저하에 대해 많은 연구가 이루어져왔다. 그러나 최신 공정에서는 트랜지스터 사이즈 감소 추세에도 불구하고 금속 배선의 스케일링이 제한됨에 따라, IR drop에 견고한 파워 게이팅 설계 시 셀 배치와 금속 배선 면적을 고려한 새로운 접근 방식이 필요하다. 본 논문에서는 셀 점유율(cell utilization)과 소모 전류에 근거한 로직 셀 배치 기법을 통해 PGC 면적 및 IR drop을 개선한 파워 게이팅 설계 방법을 제안한다. 28nm 공정으로 제조된 스마트폰용 어플리케이션 프로세서(Application processor, AP) 내 고속 디지털 코어에 적용한 결과 기존 PGC 배치 기법 대비 PGC 면적은 12.59~16.16%, 최대 IR drop은 8.49% 감소함을 확인하였다.

• 농업과학연구
• /
• 제44권4호
• /
• pp.604-612
• /
• 2017

In this study, the effects of planting density on the growth of chrysanthemum in a greenhouse were evaluated on two popular varieties (i.e., Sinma and Moonlight). Planting density treatments were as follows: 1) $12cm{\times}12cm$, 2) $6cm{\times}12cm$, 3) $6cm{\times}12cm$ with one-cell vacant, and 4) $6cm{\times}12cm$ with two-cell vacant. Size of each treatments indicate one chrysanthemum was planted in that sized cell that was rectangular shaped field and these treatments were located in a line. Moreover, "one and two-cell vacant" means that it makes middle point of the field empty, offers beside chrysanthemum larger spaces to grow. For the Sinma variety, the results of growth and flowering characteristics at the harvesting stage showed that leaf number, leaf length, flower length, and leaf area were highest when the crop was planted at the $12cm{\times}12cm$ density, and the next preferable density was $6cm{\times}12cm$ with one-cell vacant. For the Moonlight variety, the results showed that stalk height and diameter, leaf number and length, flower length, leaf area, and flower number were highest at the $12cm{\times}12cm$ planting density. For Sinma, ratios of marketable production were 87.5% and 83.3% for the $12cm{\times}12cm$ and $6cm{\times}12cm$ with two-cell vacant, respectively. For Moonlight, ratios were 88.0% and 84.3% for the $12cm{\times}12cm$ and $6cm{\times}12cm$ with two-cell vacant.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.406-413
• /
• 2011

최근 선박에서 배출되는 온실가스를 저감하기 위한 기술로 연료전지가 주목 받고 있다. 본 연구에서는 메탄을 연료로 사용한 내부개질형 500kW급 고체산화물 연료전지의 선박 적용을 가정하여 연료전지 스택을 모델링하여 스택을 구성하는 셀의 수, 수소 변환율, 셀의 반응면적에 따른 출력 및 효율에 관한 특성을 평가하고, 공기와 메탄의 공급조건이 연료전지 스택의 성능에 미치는 영향 등에 관하여 검토하였다. 그 결과 셀의 수, 수소 변환율, 셀의 반응면적 및 공급 공기 유량이 증가할수록 스택의 출력 및 효율이 증가하였고, 메탄 공급 유량이 증가하면 출력은 증가하지만 효율은 감소하였다. 또한 Case 3의 경우에 전류가 976.4 A, 전압이 529.1 V에서 출력이 516.6 kW이고 이때의 연료전지 스택의 효율은 42.91%를 얻을 수있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.420.1-420.1
• /
• 2016

Colloidal quantum dot (CQD) is emerging as a promising active material for next-generation solar cell applications because of its inexpensive and solution-processable characteristics as well as unique properties such as a tunable band-gap due to the quantum-size effect and multiple exciton generation. However, the most widely used spin-coating method for the formation of the quantum dot (QD) active layers is generally hard to be adopted for high productivity and large-area process. Instead, the spray-coating technique may potentially be utilized for high-throughput production of the CQD solar cells (CQDSCs) because it can be adapted to continuous process and large-area deposition on various substrates although the cell efficiency is still lower than that of the devices fabricated with spin-coating method. In this work, we observed that the subsequent treatment of two different ligands, halide ion and butanedithiol, on the lead sulfide (PbS) QD layer significantly enhanced the cell efficiency of the spray CQDSCs. The maximum power conversion efficiency was 5.3%, comparable to that of the spin-coating CQDSCs.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2008년도 춘계학술대회 논문집
• /
• pp.1-4
• /
• 2008

Fuel cells have the potential of providing several times higher energy storage densities than those possible using current state-of-the-art lithium-ion batteries, but current energy density of fuel cell system is not better than that of lithium-ion batteries. To achieve the high energy density, volume and weight of fuel cell system need to be reduced by miniaturizing system components such as stack, fuel tank, and balance-of-plant. In this paper, the thin flexible PCB (Printed circuit board) is used as a current collector to reduce the stack volume. Two end plates are made from light weight aluminum alloy plate. The plate surface is wholly oxidized through the anodizing treatment for electrical insulation. The opening rate of cathode plate hole is optimized through unit cell performance measurement of various opening rates. The performances are measured at room temperature and ambient pressure condition without any repulsive air supply. The active area of MEA is 10.08 $cm^2$ and active area per a unit cell is 1.68 $cm^2$. The peak power density is about 210 mW/$cm^2$ and the air-breathing planar stack of 2 Wis achieved as a small volume of 18 cc.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2003년도 하계학술대회
• /
• pp.143-148
• /
• 2003

In this paper, we focused on the performance of reverse link in 1.8GHz CDMA 1x system including the Tower-Mount LNA in an urban environment. In order to study the benefit of TMLNA, Hata model is used and the effects of multiple cells are considered. Cell coverage extension ratio is proportional to the increased gain of TMLNA in CDMA cell site. However the cell coverage is not extended even if the noise figure of TMLNA is reduced in an urban area. When typical RSSI is between -70dBm and -80dBm, the increased gain and the reduced NF of TMLNA are not impact to the pole capacity of cell site. Namely, the benefit of TMLNA in an urban area is not the problem of capacity but the proble of sensitivity. The results are also shown that reverse link $E_b/N_o$ is improved by minimum 5dB and BER is lower than $10^{-6}$.

• 대한수의학회지
• /
• 제36권3호
• /
• pp.531-539
• /
• 1996

The lectin-binding patterns in the testis of the sexually matured Jindo dog were investigated to study the distribution of glycoconjugates in the seminiferous tubule under light and transmission electron microscopy. Positive reactions to Wheat germ agglutinin(WGA) and Dolichos biflorus agglutinin (DBA) were observed in the Sertoli cell and in the residual body of spermatid with a stronger reaction in the Sertoli cell to the lectins than in the residual body. Strong reactions to Soybean agglutinin(SBA) and Peanut agglutinin(PNA) were observed in the acrosome vesicles of the Golgi- and cap-phase spermatid, while a moderate reaction was observed in the acrosome-phase, maturation-phase spermatid and the residual body. The acrosome area of the spermatid reacted intensively to Griffonia simplicifolia agglutinin( GS-I) when the cell was in the acrosome-phase and maturation-phase, and the same reaction to the GS-I was observed in the residual body. However, the seminiferous tubule did not react to Ulex europeus agglutinin I(UEA-I). The gold-labelling of the Sertoli cells with DBA resulted in positive reactions of the Sertoli cell column and processes when observed under the electron microscopy, while the Golgi-, cap- and acrosome-phase spermatids reacted positively to SBA in the peripheral low-dense area of the acrosome vesicle of spermatid. Based on these results, we concluded that differences in the lectin-binding pattern of the seminiferous tubules were recognized in the Jindo dog compared to other animals.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1188-1198
• /
• 2015

In this paper, a multi-time programmable (MTP) cell based on a $0.18{\mu}m$ bipolar-CMOS-DMOS backbone process that can be written into by using dual pumping voltages - VPP (boosted voltage) and VNN (negative voltage) - is used to design MTP memories without high voltage devices. The used MTP cell consists of a control gate (CG) capacitor, a TG_SENSE transistor, and a select transistor. To reduce the MTP cell size, the tunnel gate (TG) oxide and sense transistor are merged into a single TG_SENSE transistor; only two p-wells are used - one for the TG_SENSE and sense transistors and the other for the CG capacitor; moreover, only one deep n-well is used for the 256-bit MTP cell array. In addition, a three-stage voltage level translator, a VNN charge pump, and a VNN precharge circuit are newly proposed to secure the reliability of 5 V devices. Also, a dual memory structure, which is separated into a designer memory area of $1row{\times}64columns$ and a user memory area of $3rows{\times}64columns$, is newly proposed in this paper.