Transactions of the Korean Society of Automotive Engineers (한국자동차공학회논문집)

The Korean Society of Automotive Engineers (한국자동차공학회)
권호 표지

Three-Dimensional Fluid Flow Analysis of Photoacoustic Spectroscopy Cell for Measurement of Automotive Exhaust Gas

자동차 배출가스 측정을 위한 Photoacoustic Spectroscopy Cell의 3차원 유동장 해석

  • 김현철 (자동차부품연구원 동력시스템실) ;
  • 박종호 (충남대학교 기계공학과)
  • Published : 2003.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently, environmental damage to urban area becomes serious problem due to the exhaust emissions by increasing the number of vehicle. Especially, exhaust emission from diesel vehicles are blown to be harmful to human health and environment. Photoacoustic Spectroscopy system is very useful technology for simultaneous and continuous measurement of the various components of the automotive exhaust gas. In this study, in order to reduce emission gases from automobile, we tried to develop the measurement system of Photoacoustic Spectroscopy. To improve performance of high sensitive Photoacoustic Spectroscopy system for automotive exhaust emissions, the shape of Photoacoustic Spectroscopy cell was optimized to use the flow analysis. And Exhaust emission data of the 1,500cc gasoline engine was fixed the working fluid. The characteristics of fluid flow for cell were analyzed by various conditions in detail.

Keywords

References

  1. K. W. Lee, K. H. Cho, Development of Stack Gas Analysis System for TMS, Korea Standard Research Institute, 1989
  2. Suhas, V. Patankar, Numerical Heat Transfer and Fluid, Hemisphere, New York, 1980
  3. P. M. Gerhart, R. J. Gross, Fundamentals of Fluid Mechanics, Addson Wesley, 1996
  4. E. H. Chui, G. D. Raithby, 'Computation of Radiant Heat Transfer on a Non-Orthogonal Mesh Using Finite-Volume Method,' Numerical Heat Transfer, Vol.23,pp.269-288, 1993 https://doi.org/10.1080/10407799308914901
  5. G. D. Raithby, E. H. Chui, 'Finite Volume Method for Predicting a Radiant Heat Transfer in Enclosures with Participating Media,' J. Heat Transfer, Vol.112, pp.415-423, 1990 https://doi.org/10.1115/1.2910394
  6. A. J. Przekwas, Y. Jiang, Z. Tan, 'Unstructured Adaptive Grid Solution Methodology for Automotive Aerodynamics,' SAE 970142, 1997
  7. W. I. Chung, M. H. Kim, 'A Study on the Flow characteristics of Steady State and Pressure Variation inside the Muffler with the Inflow of Pulsating Exhaust Gas,' KSAE 99370262,1999
  8. S. K. Oh, D. S. Baik, Y. C. Han, 'Performance and Exhaust Gas Characteristics on Diesel Particulate Filter Trap,' International Journal of Automotive Technology, Vol.3, No.3, pp.111-115, 2002