While the medical supplies have positive functions such as extending lifespan, recovering health, and preventing diseases, they also cause unexpected tragic consequences due to their side effects, and the magnitude of such damage inevitably increases due to the mechanism of mass production, mass distribution, and mass consumption of those medical supplies. Therefore, needless to say, the optimal way to prevent or reduce such damage is rather through medical supply manufacturers' producing non-defective products, or through the government's controlling production and sales of medical supplies with more aggressive exercise of regulatory authority on medical supply manufacturers, than through a remedy by a legal relief after using medical supplies. In this case, although the victim died due to the defect of the cold medicine, 'CONTAC 600', the drug company's responsibility to cover damages was not recognized because a defect could not be found in the then-manufacturing process. Thus, while pharmaceutical companies are gaining economic profits by producing and selling a medical supplies, if they do not take any remedy measures for the victims of their products' side effects, the victims have to use medical supplies under their own responsibility of taking a risk, and they have to accept the full damage of the potential consequence. Therefore, to remove such absurdity and contradiction, and to practically remedy the victim of medical supplies' side effects, the pharmaceutical side effects remedy project pending in the the Drugs, Cosmetics and Medical Instruments Lawneeds to be actively implemented.
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.22
no.3
/
pp.52-58
/
2008
The importance of. identifying the causes of electrical faults cannot be overstated because of the accidents caused by over-current that take place at the home, the office and electrical facilities due to misuse, poor products and system faults. It is necessary to gather objective, scientific data pertaining to electrical fault investigation in a product liability(PL) environment. To date, no database(DB) has been built concerning the accurate cause analysis of faultyfacilities. In this paper, accident hazard and arc scattering when over-current flows in copper wire was investigated. It was found that when over-current flows in a copper wire, the copper wire became heated and bent and beads were scattered around the wire with a flash. It was determinedthat the fusing current and time was related to the current rise per second. For example, when the current rise per second was largethe fusing current was higher than when the current rise per second was small, and the beads dispersed along a wide area. Fusing time, however, was shorter. The possibility of electrical fault became highest when the fusing current was higher. As the current rise per second is short, the dendrite structure is distributed in the surface of the copper wire. These experimental results can be utilized for a fault process DB system in the investigation and the prevention of electrical faults.
Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
/
v.22
no.4
/
pp.54-60
/
2008
It is impossible to database(DB) the patterns of power cable events and cause analysis of faulted cable because the product liability(PL) law have been enforced in Korea, since 2002. In additions, simulation and pattern of power cable events are needed for DB system under accelerated deterioration. In this paper, we tested for resistance to cracking of cable below the 22.9[kV] class due to thermal stresses. This method of exam is following IEC 60811-3-1(Common test methods for insulating and sheathing materials of electric cables). From the results, The 22.9[kV] class A power cable was discolored on the surface and significantly reduced in the longitudinal direction. As the thermal weight properties of A power cable was definitely varied, we are able to guess the problem of manufacture. If the cable was defect by the manufacture, the victims would be able to claim for damage in the PL system.
Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
/
2007.11a
/
pp.349-352
/
2007
It is impossible to database(DB) the patterns of cable events and cause analysis of faulted cable because the product liability(PL) law have been enforced in Korea, since 2002. In additions, simulation and pattern of cable events are needed for DB system under accelerated deterioration. In this paper, we tested for resistance to nicking of cable below the 22.9kV class due to thermal stresses. This method of exam is following IEC 60811-3-1(Common test methods for insulating and sheathing materials of electric cables). First of all, set the cable in the thermal stress instrument, temperature changed from -20 degree to 120 degree. After thermal stress, we observed a surface crack of cable through microscope and carried out AC withstand voltage test.
Journal of Fisheries and Marine Sciences Education
/
v.23
no.4
/
pp.723-733
/
2011
On the general fishing boat in the same person of the fishing Chief and the Captain, the fishing chief positions are not separately. In this case, in Civil, Criminal and Administrative law, does not cause any problems. Just he take only responsibility for the legal effect of each, this is a natural solution for the effects of laws. But, if make one work unit, the fishing chief take fishing work from the position of the dominant of the captain, and moreover throughout the voyage work commands the captain. Such fishing chief center structure have roots institutive. In the case, according to legal liability by presenting solutions to the problem are as follows : firstly, The legal division Of the Sailing courses and operation course are necessary. Secondly, In the adminstrative ship official law, obligatory acquisition of the fishing Chief marine engineer qualification is necessary.
Recently in Korea, public interest about patient safety has increased because patient safety incidents occurred continuously. In addition, as the way of coping with medical personnel and medical institutions after occurrence of patient safety incident became controversial, the necessity of introducing apology law and disclosure law was raised. We analyzed the contents of apology law and disclosure law in U.S.A and critically examined the legislative movements in Korea. First, the Apology law requires that a medical personnel provide apology, consolation, sympathy to the patient for discomfort, pain, damage or death, and that the expression of apology shall be inadmissible as evidence of an admission of liability in civil action or administrative proceeding. The Apology law is divided into 'full apology law' and 'partial apology law' depending on whether mistake, error, fault, liability, and legal liability shall be inadmissible. Meanwhile, Disclosure law enforces or voluntarily enforces the law to communicate with the patient regarding the disclosure of the incident, the cause of incident, the compensation plan, and the measures to prevent the recurrence in the adverse incident that serious harm to the patient. In Korea, the concern about patient safety incidents has been amplified, and as the importance of communication between the medical personnel and patient has been recognized, the revision bill for the "Patient Safety Act", which adopted the U.S.A apology or disclosure law, was submitted to the National Assembly. The purpose of this study was to critically review the contents of the revised legislation based on the analysis of the apology law and disclosure law in U.S.A. and to provide implications for future legislative direction.
Transactions of the Korean Society of Mechanical Engineers A
/
v.37
no.11
/
pp.1415-1421
/
2013
Recently, to resolve problems regarding legal liability for accidents and disasters, various simulation techniques such as F.E.M. and F.V.M. have been used in the field of forensic engineering. In this study, we performed mechanical structure analysis using ADINA to investigate the cause of bridge collapse accidents. Such accidents occurred owing to modified and missing processes in comparison with the original design while filling with concrete. Modified and missing processes cause buckling of the upper plate and twisting of the main girder. Through this study, we determine the exact cause of bridge collapse by comparing the evaluation of the structure stability of the original design with the evaluation of the structure stability of the modified and missing process using ADINA structure analysis. Hence, this result indicates that buckling prediction through FEA is the most effective method.
Psychiatrists who treat violent or potentially violent patients may be sue for failure to control aggressive outpatients and for the discharge of violent inpatients. Psychiatrists may be sued for failing to protect society from the violent acts of their patients if it was reasonable for the psychiatrists to have known or should have known about the patient's violent tendencies and if the psychiatrists could have done something that could have safeguarded in public. The courts of a number of jurisdictions have imposed a duty to protect the potential victims of a third party on persons or institutions with a special relationship to that party. In the landmark case of Tarasoff v Regents of University of California, the California Supreme Court held that the special relationship between a psychotherapist and a patient imposes on the therapist a duty to act reasonably to protect the foreseeable victims of the patient. Under Tarasoff, when a therapist has determined, or under applicable professional standards should determine, that a patient poses a serious threat of violence to another, he incurs an obligation to use reasonable care to protect the intended victim against such danger. In addition to a Tarasoff type of action based on a duty to warn or protect foreseeable victims of psychiatric outpatients, courts have also imposed liability on mental health care providers based on their custody of patients known to have violent propensities. The legal duty in such a case has been stated to be that where the course of treatment of a mental patient involves an exercise of "control" over him by a physician who knows or should know that the patient is likely to cause bodily harm to others, an independent duty arises from that relationship and falls on the physician to exercise that control with such reasonable care as to prevent harm to others at the hands of the patient. After going through a period of transition, from McIntosh, Thompson and Brady case, finally, the narrow rule of requiring a specific or foreseeable threat of violence against a specific or identifiable victim is the standard threshold or trigger element in the majority of states. Judgements on these kinds of cases are not enough yet in Korea, so that it may be too early to try find principles in these cases, however it is hardly wrong to read the same reasons of Tarasoff in the judgements of Korea district courts. To specific, whether a psychiatric institute was liable for violent behavior toward others depends upon the patients conditions, circumstances and the extent of the danger the patients poses to others; in short, the foreseeability of a specific or identifiable victim. In this context if a patient exhibit strong violent behavior toward others, constant observation should be required. Negligence has been found not exist, however, when a patient abruptly and unexpectedly attack others or unidentifiable victim. And the standard of conduct that is required to meet the obligation of "due care" is based on what the "reasonable practitioner" would do in like circumstances. The standard is not one of excellence or superior practice; it only requires that the physician exercise that degree of skill and care that would be expected of the average qualified practitioner practicing under like circumstances. All these principles have been established in cases of the U.S.A and Japan. In this article you can find the reasons which you can use for psychotherapist's liability for failure to protect third person in Korea as practitioner.
The Transactions of The Korean Institute of Electrical Engineers
/
v.60
no.6
/
pp.1274-1279
/
2011
The purpose of this paper is to present the manufacturing defect and damage pattern of a 3 phase 22.9/3.3kV oil immersed transformer, as well as to present an objective basis for the prevention of a similar accident and to secure data for the settlement of PL related disputes. It was found that in order to prevent the occurrence of accidents to transformers, insulating oil analysis, thermal image measurement, and corona discharge diagnosis, etc., were performed by establishing relevant regulation. The result of analysis performed on the external appearance of a transformer to which an accident occurred, the internal insulation resistance and protection system, etc., showed that most of the analysis items were judged to be acceptable. However, it was found that the insulation characteristics between the primary winding and the enclosure, those between the ground and the secondary winding, and those between the primary and secondary windings were inappropriate due to an insulating oil leak caused by damage to the pressure relief valve. From the analysis of the acidity values measured over the past 5 years, it is thought that an increase in carbon dioxide (CO2) caused an increase in the temperature inside the transformer and the increase in the ethylene gas increased the possibility of ignition. Even though 17 years have passed since the transformer was installed, it was found that the system's design, manufacture, maintenance and management have been performed well and the insulating paper was in good condition, and that there was no trace of public access or vandalism. However, in the case of transformers to which accidents have occurred, a melted area between the upper and the intermediate bobbins of the W-phase secondary winding as well as between its intermediate and lower bobbins. It can be seen that a V-pattern was formed at the carbonized area of the transformer and that the depth of the carbonization is deeper at the upper side than the lower side. In addition, it was found that physical bending and deformation occurred inside the secondary winding due to non-uniform pressure while performing transformer winding work. Therefore, since it is obvious that the accident occurred due to a manufacturing defect (winding work defect), it is thought that the manufacturer of the transformer is responsible for the accident and that it is lawful for the manufacture to investigate and prove the concrete cause of the accident according to the Product Liability Law (PLL).
Air transport agreement can be divided into air passenger contract of carriage and aviation also of the contract of carriage. And air carriers for damages greater (1) cause reason, of (2) limit reason, (3) exemption reason. Exemption reason for the extinction of the liability for damages in our Commercial Code, the Convention and domestic law are mixed. Convention on the Commercial Code and air transport, air transport people, if it is proved and that it has taken all the measures that are needed for the prevention of damage to overdue damage of passengers, liability is waived. So what was to achieve the requirements of all the actions that are reasonably necessary in any case is a problem. Amendment has the feature that the treaty for the International Air Transport reflect in accordance with the domestic situation, while being struck by international standards encompassing land, sea and air transport, even on the system. However, Commercial Code while mainly reflect the Montreal Convention governing air carrier's liability issues on the contract of carriage, a problem which the Convention had also began to occur together. So the problem due to accept the treaty to fit the domestic situation occurs. There is a need for analysis of all of the actions that are "reasonably necessary, which is defined in the Commercial Code. If there is no claim within Value Date rotor two years to air carriers on the court for the damage caused by air transport, the responsibility of air carriers disappear, sued the period of such two years, what kind of meaning on domestic law extension and stop to be whether it is interpreted, it should be determined to do their aggressive measures for the reasonable care and accident prevention.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.