• 대한금속재료학회지
• /
• 제56권12호
• /
• pp.910-914
• /
• 2018

Since catalyst technology is one of the promising technologies to improve the working performance of next generation energy and electronic devices, many efforts have been made to develop various catalysts with high efficiency at a low cost. However, there are remaining challenges to be resolved in order to use the suggested catalytic materials, such as platinum (Pt), gold (Au), and palladium (Pd), due to their poor cost-effectiveness for device applications. In this study, to overcome these challenges, we suggest a useful method to increase the surface area of a noble metal catalyst material, resulting in a reduction of the total amount of catalyst usage. By employing block copolymer (BCP) self-assembly and nano-transfer printing (n-TP) processes, we successfully fabricated sub-20 nm Pt line and cross-bar patterns. Furthermore, we obtained a highly ordered Pt cross-bar pattern on a Ni thin film and a Pt-embedded Ni thin film, which can be used as hetero hybrid alloy catalyst structure. For a detailed analysis of the hybrid catalytic material, we used scanning electron microscope (SEM), transmission electron microscope (TEM) and energy-dispersive X-ray spectroscopy (EDS), which revealed a well-defined nanoporous Pt nanostructure on the Ni thin film. Based on these results, we expect that the successful hybridization of various catalytic nanostructures can be extended to other material systems and devices in the near future.

• Journal of Electrochemical Science and Technology
• /
• 제11권3호
• /
• pp.220-237
• /
• 2020

Modern electrochemical energy devices involve generation and reduction of fuel gases through electrochemical reactions of water splitting, alcohol oxidation, oxygen reduction, etc. Initially, these processes were executed in the presence of noble metal-based catalyst that showed low overpotential and high current density. However, its high cost, unavailability, corrosion and related toxicity limited its application. The search for alternative with high stability, durability, and efficiency led scientists towards carbon nanoparticles supported catalysts which has high surface area, good electrical conductivity, tunable morphology, low cost, ease of synthesis and stability. Carbon nanoparticles are classified into two groups based on morphology, one and zero dimensional particles. Carbon nanoparticles at zero dimension, denoted as carbon dots, are less used carbon support compared to other forms. However, recently carbon dots with improved electronic properties have become popular as catalyst as well as catalyst support. This review focused on the recent advances in electrocatalytic activities of carbon dots. The mechanisms of common electrocatalytic reactions and the role of the catalysts are also discussed. The review also proposed future developments and other research directions to overcome current limitations.

• Macromolecular Research
• /
• 제13권5호
• /
• pp.391-396
• /
• 2005

The polymerization of methyl methacrylate (MMA) was carried out using CuBr/bidentate phosphorus ligand catalyst systems. MMA polymerization with CuBr/phosphine-phosphinidene (PP) exhibited high conversion ($\~80\%$) in 5 h at $90^{\circ}C$ along with a linear increase of ln($[M]_0/[M]$) versus time, indicating constant concentration of the propagating radicals during the polymerization. The molecular weight of the prepared PMMA tended to increase with conversion, suggesting the living polymerization characteristic of the system. On the other hand, a large difference between the measured and theoretical molecular weight and a broad molecular weight distribution were observed, implicating possible incomplete control over the polymerization. This may have been caused by the low deactivation rate constant ($\kappa_{deact}$) of the system. The low $\kappa_{deact}$, would result in irreversible generation of radicals instead of reversible activation/deactivation process of ATRP. Polymerizations performed at different ligand to CuBr ratios and different monomer to initiator ratios did not afford better control over the polymerization, suggesting that the controllability of CuBr/phosphorus ligand system for ATRP is inherently limited.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2822-2827
• /
• 2008

Among the main components of PEM fuel cell, the functions of GDL are to transport reactants from the channel to the catalyst and remove reaction products from the catalyst and transport heat from the catalyst to the channels in the flow filed plate. Permeability of GDL is known to make it possible to enhance the gas transport through GDL, devoting to get better performance. In this paper, three dimensional numerical simulation of the fuel cell by the permeability of GDL is presented by using a FLUENT modified to include the electrochemical behavior. Results show that as permeability is higher than $10^{-12}m^2$, gradients of temperature distribution, oxygen molar concentration and current density distribution in MEA were decreased. Although heat generation was increased as high permeability, MEA's temperature was lower than the low permeability of GDL. This seems because that convection was higher affects in mass and heat transfer process than diffusion as permeability of GDL is increases.

• 대한화학회지
• /
• 제37권8호
• /
• pp.744-752
• /
• 1993

거대고리화합물의 유도체들은 촉매로 사용하여 유리질 탄소전극과 탄소 미소전극에서 SOCl$_2$의 전기화학적 환원반응을 조사하였다. 이들 유도체들은 먼저 전극표면에 흡착된 후 SOCl$_2$를 환원시켰다. 전해질 용액에 전극이 담기는 시간과 촉매들의 농도의 변화는 SOCl$_2$의 환원에 크게 영향을 미쳤다. 유리질 탄소 전극에서 촉매효과에 의한 속도상수는 10배 증가하였고, Power 밀도는 최고 220% 까지 증가하였다. 탄소 미소전극을 사용하여 시간전류법에 의해 얻은 확산계수는 유리질 탄소전극을 사용하여 순환전압전류법에 의해 얻은 결과와 다소 다른 값으로 나타났다.

• 세라미스트
• /
• 제21권4호
• /
• pp.331-348
• /
• 2018

With the expectation to overcome the problem of increasing energy consumption, polymer electrolyte membrane fuel cells are getting more attention as a promising environmentally friendly and sustainable next-generation energy conversion system. In spite of the rapid improvement of polymer electrolyte membrane fuel cells(PEMFCs), there are several critical issues still need to be resolved for practical commercialization. Out of the many issues, the main hurdle comes from oxygen reduction reaction(ORR), thus development of efficient ORR electrocatalysts is the main key for enhancing PEMFC performance. Among various catalysts, 1D nanostructured catalyst is a promising candidate because it holds many advantages that come from nanostructuring while supplementing the disadvantages of other nanostructures such as nanoparticles(0D) or gyroids(3D). This review focused on diverse 1D nanostructures and talks about their advantages as catalyst for ORR. Different 1D nanostructures will be introduced while applying the structures to different materials system showing the prospects of 1D nanostructures for improving PEMFC.

• Korean Chemical Engineering Research
• /
• 제57권5호
• /
• pp.596-605
• /
• 2019

프로톤 전도성 세라믹인 페로브스카이트 구조의 산화물은 고온 환경에서 고체 전해질 및 촉매로써 동시에 활용이 가능하여, 반응과 분리기능을 동시에 갖춘 멤브레인 반응기로 적용하기에 우수한 소재이다. 특히 수소 제조 촉매와 분리, 이를 결합한 멤브레인 반응기 개발에 관한 연구는 전해질 내 도핑 금속의 종류 및 온도, 반응물의 조성 등에 따라 다양한 연구 결과가 제시되고 있다. 이에 본 총설에서는 프로톤 전도성 세라믹반응기에서 메탄을 활용하여 수소 제조촉매와 멤브레인 반응기로 응용해 온 연구 동향을 살펴보고, 차세대 수소의 제조와 분리 기술로서의 응용분야 및 전망에 관해 고찰하고자 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.296-298
• /
• 2005

Hydrogen generation by the hydrolysis of aqueous sodium borohydride $(NaBH_4)$ solutions was studied using IRA-400 anion resin dispersed Pt. Ru catalysts and Lithium Cobalt oxide $(LiCoO_2)$ supported Pt, Ru and PtRu catalysts. The performance of the $LiCoO_2$ supported catalysts is better than the ion exchange resin dispersed catalysts. There is a marked concentration dependence on the performance of the $LiCoO_2$ supported catalysts and the hydrogen generation rate goes down if the borohydride concentration is increased beyond $10\%$. The efficiency of PtRu- $LiCoO_2$ is almost double that of either Ru-$LiCoO_2$ or Pt-$LiCoO_2$ for $NaBH_4$ concentrations up to $10\%$.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.55-62
• /
• 2006

A two-step fuel-rich/fuel-lean catalytic combustion seems to be one of the most effective methods to control simultaneously the NO generation and the hydrocarbon (HC) conversion from fuel-bound nitrogen. By controlling equivalent air ratio for maintaining fuel-rich and fuel-lean condition over each catalytic layer, space velocity, inlet temperature, and catalyst component, the HCand ammonia conversion efficiency higher than 95% could be achieved, with ammonia conversion to NO remaining below 5%. The experimental results wouldbe applied to the combustion of land fill gas and to gasified refuse-derived fuels as a method of minimizing NO generation.

• 대한환경공학회지
• /
• 제31권11호
• /
• pp.965-974
• /
• 2009

본 연구는 가시광선 조건에서 질소 및 황 도핑 $TiO_2$를 활용하여 악취유발 황화유기화합물질의 분해능을 평가하고, 광촉매 분해시 발생하는 촉매 비활성화와 비활성화된 촉매의 재생에 대해 조사하였다. 적외선 분광법을 이용하여 촉매 표면의 특성을 조사하였다. 가시광선을 이용한 광촉매 기술이 낮은 농도의 황화 이메틸(0.039 ppm)과 이황화 이메틸 (0.027 ppm)은 97% 이상의 높은 효율로 처리할 수 있으나, 촉매 비활성으로 인해 높은 농도(황화 이메틸, 7.8 ppm 및 이황화 이메틸, 5.4 ppm)에 대해서는 광촉매 공정 시간 5시간만에 처리 효율이 황화 이메틸은 84% 그리고 이황화 이메틸은 23%까지 매우 낮게 나타났다. 황화 이메틸에 비하여 황 원소가 하나 더 결합된 이황화 이메틸의 광촉매 분해시 촉매가 빠르게 비활성화되었다. 높은 유입 농도 조건에서 이황화 이메틸 또는 황화 이메틸의 광촉매 반응기의 출구 농도가 유 입농도와 비슷하거나, $CO_2$의 생성률이 제로에 가깝거나, FTIR 스펙트럼 상에서 촉매 표면의 비활성을 유발하는 황 이온 화합물의 피크들이 강하게 나타나, 촉매의 비활성화를 확인하였다. 광촉매 반응기의 유출구에서의 최대 $CO_2$ 농도인 8 ppm에 대해서 황화 이메틸의 광물화 효율을 계산한 결과 144%로서 100%를 초과한 것으로 나타났다. 건조-공기 및 습윤-공기 재생 방법에 비해 고온 소성에 의한 촉매의 재생효율이 높게(이황화 이메틸, 53% 그리고 황화 이메틸, 58%) 나타났으나, 이 또한 촉매 비활성을 유발시키는 황 이온 화합물과 같은 부산물들을 완전히 제거되지는 못하는 것으로 확인되었다.