• Geophysics and Geophysical Exploration
• /
• v.9 no.4
• /
• pp.279-290
• /
• 2006

The borehole radar methods used to tunnel detection are mainly classified into borehole radar reflection, directional antenna, crosshole scanning, and radar tomography methods. In this study, we have investigated the feasibility and limitation of each method to tunnel detection through case studies. In the borehole radar reflection data, there were much more clear diffraction signals of the upper wings than lower wings of the hyperbolas reflected from the tunnel, and their upper and lower wings were spreaded out to more than 10m higher and lower traces from the peaks of the hyperbolas. As the ratio of borehole diameter to antenna length increases, the ringing gets stronger on the data due to the increase in the impedance mismatching between antennas and water in the boreholes. It is also found that the reflection signals from the tunnel could be enhanced using the optimal offset distance between transmitter and receiver antennas. Nevertheless, the borehole radar reflection data could not provide directional information of the reflectors in the subsurface. Direction finding antenna system had a advantage to take a three dimensional location of a tunnel with only one borehole survey even though the cost is still very high and it required very high expertise. The data from crosshole scanning could be a good indicator for tunnel detection and it could give more reliable result when the borehole radar reflection survey is carried out together. The images of the subsurface also can be reconstructed using travel time tomography which could provide the physical property of the medium and would be effective for imaging the underground structure such as tunnels. Based on the results described above, we suggest a cost-effective field procedure for detection of a tunnel using borehole radar techniques; borehole radar reflection survey using dipole antenna can firstly be applied to pick up anomalous regions within the borehole, and crosshole scanning or reflection survey using directional antenna can then be applied only to the anomalous regions to detect the tunnel.

• Korean journal of applied entomology
• /
• v.55 no.4
• /
• pp.421-429
• /
• 2016

Tenebrio molitor larvae contain large amounts of proteins, lipids and other functional materials, enabling this insect to be used as an edible food source in animal feeds and for industrialization. Although many efforts have been made to set up mass rearing systems, few studies have been conducted to establish optimal rearing conditions for the production of high quality T. molitor larvae. Herein we investigated 1) the effects of additional diets on the survival and fecundity of the insect, 2) the relationship between oviposition period and the uniformity of larval size, 3) the effects of rearing density and temperature on insect development, and 4) the storage stability of eggs and pupae at low temperatures given possible temporary production discontinuation. The addition of carrot and zucchini to the traditional wheat bran diet significantly increased the survival and fecundity rate of adult T. molitor. Of the three different oviposition sampling periods (3, 7, and 14 days) used to investigate the uniformity of the hatched larvae in each treatment, the period of 3 and 7 days provided higher uniformity than the 14 days oviposition period. Larval development was faster at $30^{\circ}C$ than at 20, 25, and $35^{\circ}C$. Interestingly, oviposition rates were highest at $20^{\circ}C$ but showed much slower larval development and lower uniformity at $30^{\circ}C$. Regarding the effect of larval rearing densities (1, 10, 20, 30, 40, and 50 larvae per 90 mm diam. dish), larval weight was significantly reduced at higher rearing densities, but larval longevity and length were not influenced by rearing density. The 30 larvae/dish is suggested to be a reasonable density to be applied to mass production systems. When kept at $4^{\circ}C$, T. molitor eggs showed a significant reduction in hatching rate; however, when stored under the same conditions, pupae emergence rates remained high until 10 weeks, suggesting that storage at low temperatures is more suitable for the pupal stage than the egg stage. Our findings suggest that an increase in T. molitor adult survival and fecundity rates and a uniformity of hatched larval development can be achieved with the following recommendations: a combination diet (including wheat bran), a 7-day oviposition period; a larvae-rearing temperature of $30^{\circ}C$, a rearing density of 30 larvae/dish, and the storage of pupal stages at low temperatures in the case of rearing discontinuation. This study serves as a strong foundation for the successful mass production of high quality T. molitor larvae.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.39-44
• /
• 2020

Recently, numerous researches are being conducted in flexible substrate to apply to wearable devices. Particularly, Conductive substrate researches that can implement the wearable devices on clothing are massive. In this study, we formed fiber substrate spraying CNT and Pd mixed solution on it and plated metal layer with electroless plating. Used SEM equipment and EDS analysis to analysis structure of the plated fiber substrate and discovered Ni layer was created. For check electrical properties, mapping was performed to check surface resistance and distribution of resistance of electroless plated fiber substrate with 4-point probe. It was confirmed that conductivity was improved as the duration of electroless plating was increased, and it was found that distribution of resistance by surface location was uniform. Changes in resistance due to mechanical stress were measured through tensile, bending, and twisting tests. As a result, it was confirmed that resistance change of flexible substrate gradually disappeared as plating time increased. Using UTM (Universal testing machine), it was analyzed mechanical properties of the electroless plated substrate with respect to changes in plating time were improved. In the case of conductive fiber substrate in which electroless plating was performed for 2 hours, tensile strength was increased by 16 MPa than fiber substrate. Based on these results, we found that Ni-CNT-Fabric flexible substrate is adequate for clothing-intergrated conductive substrate and we positively expect that this experiment shows flexible substrate can adapt to and develop not only a wearable device technology but also other fields needing flexibility such as battery, catalyst and solar cell.

• Journal of agricultural medicine and community health
• /
• v.17 no.1
• /
• pp.34-45
• /
• 1992

In this county, the gap between the urban 'haves' and the rural 'have-nots' continues to be an increasing problem. WHO and UNICEF see primary health care(PHC) as the key to achieving an acceptable level of health throughout the world as a community development. PHC is essential health care made accessible to individuals and families in the community by means acceptable to them. It is the first level of contact of individual, the family, and community with the national health system. It includes at least education on health system. It includes at least education on health problems, promotion of food supply, MCH including family planning, immunization against infectious diseases, control of endemic diseases, treatment of common diseases and injuries, promotion of mental health, and provision of essential drugs. However, of the aboves, education concerning of mental health problems and the methods to identify, prevent, and control them is the principal step of establishment. In Korea, the category of PHC worker includes the physician as public doctor and nurse as primary health care practitioner and community health leader as village health worker. PHC workers of the aboves will thus function best if they are appropriately trained to respond to the health needs of the community. However in this country, since the national PHC service project launched in 1980, the government has not developed and performed appropriate and enough education and training activities. In light of above reasons, several categories of health education activities had been planned and performed being aimed at above specific target groups and the main focus was on the village health workers for about one year from July 1991 to July 1992 in Yeoju Kun of Kyonki Province. At the end of the period, evaluation of education input was carried out to measure the improvement of healthful life of people in terms of awareness, attitude, and practice. At the end of the period, evaluation of education input was carried out to measure the improvement of healthful life of people in terms of awareness, attitude, and practice. The totals of 80 village health workers, 13 public health practitioners and 9 public docters took in the course of health education for a few hours at every month and the evaluation works of educational effect were taken. The results the study were as follows. 1) Number of persons who realized the maxim "health care of the people is a duty of the government" increased after the education course, On the other hand, the rate of satisfaction on the effort of government for health promotion of the people decreased. 2) Public doctors and primary health care practitioners(nurses) liked and enjoyed the education schedule as a meeting of peer group. It provided chances of communication with staffs of Korea University Hospital. It was said that lectures covered great deal of knowledge and technic they urgently needed in the field. 3) After finishing the education course, more of village health workers(VHW) thought they adapted themselves to their roles and functions showing increased number of home visit and contact with primary health care practitioners by month. 4) In case of patient refer, VHW preferred primary health care practitioners to public doctors. 5) Capability of VHWs in most of their functions increased dramatically after when the education course finished except tuberculosis control.

• Korean journal of communication and information
• /
• v.46
• /
• pp.108-147
• /
• 2009

This study explores the news frames on the U. S. beef imports and candlelight vigils covered by the two national dailies such as ChosunIlbo and the Hankyoreh Shinmun; the KwangwonIlbo, a local daily. The news frames extracted based on the models of Iyengar(1987), Semetko & Valkenburg(2000) and other researchers are attribution of responsibility, economic sequences, protest against the authorities, national health and governmental public relations and so on. The result shows that the news reports are consisted of the straight news(75.9%), feature stories(11.7%) and editorials(6.3%). More specifically, there is a comparatively hight ratio of editorials(11.0%) for the ChosunIlbo, feature stories(20.9%) for the Hankyoreh, and the straight news(89.7%) for the KwangwonIlbo. In terms of the news frames stressed by the three dailies, the ChosunIlbo focuses and stresses on the national health(17.8%) and the attribution of responsibilities(10.6%). However, the Hankyoreh have a tendency to stress on the protest against the authorities(31.3%) and attribution of responsibilities(38.4%); the KwangwonIlbo, focuses on the protest against the authorities(38.4%) and the economic sequences(17.9%). Finally, in the case of the main characteristics of the dailies, the governmental public relations frame is found only on the ChosunIlbo that has a comparatively high ratio; the Hankyoreh also has a high ratio of the feature stories on the U. S. beef imports. Even thought the KwangwonIlbo has a high ratio of the economic sequence frame, the ratio of opinion pages, such as editorial and columns, the local newspaper has not spoken up for the potential economic crisis of the local Kwangwon province beef industry, mainly caused by the U. S. import beef.

• Korean journal of food and cookery science
• /
• v.14 no.1
• /
• pp.84-90
• /
• 1998

A research was carried out to determine the formation, contents in foods, and antioxidative effects of conjugated linoleic acid (CLA). CLA was known as a mixture of positional isomer of linoleic acid (LA), that was included in milk, meat, and fish. The formation of CLA from methyl linoleate and soybean oil (SBO) storecd at 20${\pm}$1$^{\circ}C$ was higher than at 40${\pm}$1$^{\circ}C$, and CLA formation from methyl linoleate stored at 20${\pm}$1$^{\circ}C$ was over 13 times higher than early amounts(188 ppm) and was higher than that from SBO. In edible vegetable oils, the content of CLA were the highest in canola oil (CAO, 348 ppm) but were decreased during storage at 40${\pm}$1$^{\circ}C$, while the content of CLA in cotton seed oil (CSO) were 292 ppm, which increased dramatically (1322 ppm) during 28 days of storage at 40${\pm}$1$^{\circ}C$. Because the peroxide value (POV) of CSO at that time was very low (10.05 meq/kg $.$ oil), CLA occurrence of CSO was shown to be very available during storage at temperature. CLA content of milk from a market ranged 293∼2148 ppm, which depended on the manufacturing, companies. In meat, the CLA content was very high in pork (2379 ppm), and among fishes, that of spanish mackerel was the highest (1040 ppm, almost same as beef, which increased greatly (2039 ppm) during boiling with seasoning. Antioxidative effect of CLA on SBO was almost same as that of BHT until 7 days of storage at 40${\pm}$1$^{\circ}C$, but decreased greatly after that period. In case of com oil (CNO), antioxidative effects of CLA were higher than those or BHN and tocopherol, suggesting that the effect was different depending on the kinds of oils used as substrates. During heating at 180${\pm}$1$^{\circ}C$, antioxidative effect of CLA on SBO appeared almost same as those or BHT and tocopherol, and it was also shown greater effects in heating at high temperature (180${\pm}$1$^{\circ}C$) than at low temperature(40${\pm}$1$^{\circ}C$).

• Journal of the Korean earth science society
• /
• v.30 no.6
• /
• pp.699-708
• /
• 2009

Recently as the interest in the development of domestic ore deposits has increased, we can easily find some studies on exploration geophysics-based ore-deposit survey in literature. Based on the fact that mineralized zone are generally more conductive than surrounding media, electrical resistivity survey among several geophysical surveys has been applied to investigate metallic ore deposits. Most of them are grounded on 2-D survey. However, 2-D inversion may lead to some misinterpretation for 3-D geological structures. In this study, we investigate the feasibility of the 3-D electrical resistivity survey to 3-D vein-type ore deposits. We first simulate 2-D dipole-dipole survey data for survey lines normal to the strike and 3-D pole-pole survey data, and then perform 3-D inversion. For 3-D ore-body structures, we assume a width-varying dyke, a wedge-shaped, and a fault model. The 3-D inversion results are compared to 2-D inversion results. By comparing 3-D inversion results for 2-D dipole-dipole survey data to 3-D inversion results for 3-D pole-pole survey data, we could note that the 2-D dipole-dipole survey data yield better inversion results than the 3-D pole-pole data, which is due to the main characteristic of the pole-pole array. From these results, we are convinced that if we have certain information on the direction of the strike, it would be desirable to apply 2-D dipole-diple survey for the survey lines normal to the strike. However, in most cases, we do not have any information on the direction of the strike, because we already developed the ore deposit with the outcrops and the remaining ore deposits are buried under the surface. In that case, performing 3-D pole-pole electrical resistivity survey would be a reasonable choice to obtain more accurate interpretation on ore body structure in spite of low resolution of pole-pole array.

• Journal of Technologic Dentistry
• /
• v.19 no.1
• /
• pp.21-35
• /
• 1997

The Ag-Pd-Cu alloys containing a small amount of Au is commonly used for dental purposes, because this alloy is cheaper than Au-base alloys for clinical use. However, the most important characteristic of this alloy is age-hardenability, which is not exhibited by other Ag-base dental alloys. The specimens used were Ag-20Pd-20Cu ternary alloy and Au addition alloy. These alloys were melted and casted by induction electic furace and centrifugal casting machine in Ar atmoshpere. These specimens were solution treated for 2hr at $800^{\circ}C$ and were then quenched into iced water, and aged at $350{\sim}550^{\circ}C$ Age-hardening characteristics of the small Au-containing Ag-pPd-Cu dental alloys were investigated by means of hardness testing, X-ray diffraction and electron microscope observations, electrical resistance, differential scanning calorimetric, emergy dispersed spectra and electron probe microanalysis. Principal results are as follows : Hardening occured in two stages, I. e., stage I in low temperature and stage II in high temperature regions, during continuous aging. The case of hardening in stage I was due to the formation of the Llo type face centered tetragonal PdCu-ordered phase in the grain interior and hardening in stage I was affedted by the Cu concentration. In stage II, decomposition of the $\alpha$ solid solution to a PdCu ordered phase(L1o type) and an Agrich ${\alpha}2$ phase occurred and a discontiunous precipitation occurred at the grain boundary. Form the electron microscope study, it was concluded that the cause of age-hardening in this alloy is the precipitation of the PdCu ordered phase, which has AuCu I type face-centered tetragonal structure. Precipitation procedure was ${\alpha}\to{\alpha}+{\alpha}2+PdCu\to{\alpha}1+{\alpha}2+PdCu$ at Pd/Cu = 1 Ag-Pd-Cu alloy is more effective dental alloy as ageing treatment and is suitable to isothermal ageing at $450^{\circ}C$.

• Journal of the Economic Geographical Society of Korea
• /
• v.19 no.2
• /
• pp.360-377
• /
• 2016

Since after the 1986 economic reform policy(Doi Moi), the central highland in Vietnam has transformed into one of the largest coffee producing areas. The transformation had been supported by mass migration of ethnic Kinhs from the coastal lowland. It did not take long for the Kinh migrants to be the ethnic majority in the region. Meanwhile the growth of coffee industry entailed in socio-economic disparity, specially between Kinh migrants and native ethnic minorities. The disparity has becomed obvious not only between coffee farming Kinhs and non-coffee farming ethnic minorities but also between coffee farming Kinhs and ehtnic minorities. The previous literatures highlight the lack of human and social capital and the lagging modernization in ethnic minority societies. However, they fall short in showing the explicit processes why ethnic minority coffee farmers earn less than ethnic majority counterparts. With a case study of Dak Lak province, this research attempts to show the reason why there is income gap between Kinh and ethnic minority Ede coffee farmers by comparing their ways of producing coffee and selling their products. The results show that Ede's land productivity is significantly lower than Kinh's. It is because Ede farmers use less fertilizer due to the shortage of the capital. Also they often get into debt for coffee production and should pay it back right after the harvest. It deprives them of chance to raise earning by selling the coffee beans at a higher price.

• Journal of Korean Society of Forest Science
• /
• v.102 no.2
• /
• pp.170-175
• /
• 2013

This study was conducted to investigate the effect on the habitation of Monochamus alternatus, a vector insect of Pine wood nematode by the tended sound stumps for the developing forestry control methods of Pine wilt disease controls. Field cage plots (1 m ${\times}$ 1 m ${\times}$ 1 m) were established 12 units (Experiment1:4 units, Experiment2:8 Units) and were treated 4 kinds(February in 2010, February, April, June in 2011). The adults of M. alternatus were put into 4~5couples each the cage June in 2011. Presence or absence of the larva entrance holes and larva were detailed November in 2011. The larva were appeared in the sound stumps of sapling and young trees tended at February, April, June, the current emergence year of M. alternatus, but were not appeared in the sound stumps of sapling and young trees tended February in 2010, one year before the emergence of M. alternatus. The larva habitated in stumps of sapling were likely to be smaller in size in compare to the larva in stumps of young trees. In case of young tree, the larva were found at the cleft part of bark, but were not found at ridge part of bark. All observed larva appeared at part of bark and between the bark and the woody parts, but were not found at the woody parts. To develop the control guiding principal of sound stump after forest tending practice, further experiment need is in existence oviposition and larvae of vectors by height of stemps.