• 대한치과의사협회지
• /
• 제58권11호
• /
• pp.683-689
• /
• 2020

Dentin surface of non-carious lesion is usually attached with oral biofilm. The biofilm should be removed before application of restorative material, because it may reduce the bond strength of adhesive system. The aim of this study was to evaluate the microtensile bond strength, when the biofilm was removed with brush or bur. Twenty extracted human third molars were sectioned horizontally to obtain dentin surface. Specimen were divided randomly into four group. Biofilm formation was performed in three group, except for Group 1 (negative control). Biofilm was removed as follows: Group 3, using ICB brush; Group 4, using lowspeed round bur #2. Group 2 (positive control) was not removed Biofilm. And in all four groups, the adhesive system (Optibond FL, Kerr) was applied to etched dentin surface, and resin composite was built up in three 1mm increments. After 24 hour storage in distilled water, the teeth were perpendicularly sectioned to obtain beams (1 × 1 mm2). Microtensile bond strength was measured and the data were statistically analyzed using one-way ANOVA and Tukey's post hoc test (p<0.05). Group 4 showed the highest microtensile bond strength (p<0.05), Group 3 showed no significant improvements when compared to Group 1. Group 2 showed lowest microtensile bond strength (p<0.05). When restoring a non-carious cervical lesion, it is essential to remove the biofilm present on the dentin surface. In addition, in the method of removing the biofilm, both the brush removal method and the bur removal method were effective.

• Restorative Dentistry and Endodontics
• /
• 제30권3호
• /
• pp.149-157
• /
• 2005

본 연구는 우식의 기계적 제거와 기계화학적 제거의 효과를 비교, 평가하고자 하였으며, 기계적 제거방법은 저속의 round bur로, 기계 화학적 제거 방법은 Carisolv로 우식을 제거한 후, 잔존 우식을 확인하여 소요시간을 측정하였고, 또 실험실에서 발치한 우식 대구치 20개를 위 두 가지 방법으로 우식을 제거 후, Villanueva bone stain액으로 염색하고 표본을 제작 후 관찰하여 다음의 결론을 얻었다; 1.우식제거에 평균소요시간은 기계화학적 제거가 기계적인 제거보다 1.5배 더 길게 나타났다 (P < 0.05). 2, 우식제거에 평균소요시간은 소구치보다 대구치에서 더 길었고, 전치에서 가장 적은것으로 나타났다 (P < 0.05) 3 상 · 하악에서는 차이가 없었다 (P > 0.05) 4. 기계화학적 방법으로 우식 상아질을 제거 시 잔존 우식 상아질이 관찰되었으며 두 방법 모두 우식 상아질을 제거한 표면에서는 도말층을 관찰할 수 없었다.

• Restorative Dentistry and Endodontics
• /
• 제17권1호
• /
• pp.206-213
• /
• 1992

The aim of this study was to compare the accuracy of radiographic diagnosis of secondary carious lesions adjacent to composite filling materials with different radiopacity. The level of radiopacity that is most compatible with the radiographic diagnosis of secondary caries was studied in a two part experiment. In the first part, the radiopacity of 6 posterior composites CBP, CF, HM, LF, PQ, P50), enamel and dentin were measured by desitometer and 6 posterior composites divided into 3 groups based on their level of radiopacity compared with enamel and dentin. In the seocnd part, class II composite fillings with or without secondary caries were made in extracted premolar and radiographs of the teeth were examined by 10 dentists to diagnose simulated carious lesion. The following results were obtained: 1. The radiopacity of 6 posterior composites varied between 1.76(PQ) and 6.78(P50)mm Al equivalent. 2. For 4 composites the radiopacity exeeded that of an equal thickness of enamel, and for two the radiopacity was lower than that of dentin. 3. The detection of secondary caries was facillitated when the radiopacity of a composite resin was similar to or slightly greater than that of enamel.

• Restorative Dentistry and Endodontics
• /
• 제38권4호
• /
• pp.258-262
• /
• 2013

The restorative management of deep carious lesions and the preservation of pulp vitality of immature teeth present real challenges for dental practitioners. New tricalcium silicate cements are of interest in the treatment of such cases. This case describes the immediate management and the follow-up of an extensive carious lesion on an immature second right mandibular premolar. Following anesthesia and rubber dam isolation, the carious lesion was removed and a partial pulpotomy was performed. After obtaining hemostasis, the exposed pulp was covered with a tricalcium silicate cement (Biodentine, Septodont) and a glass ionomer cement (Fuji IX extra, GC Corp.) restoration was placed over the tricalcium silicate cement. A review appointment was arranged after seven days, where the tooth was asymptomatic with the patient reporting no pain during the intervening period. At both 3 and 6 mon follow up, it was noted that the tooth was vital, with normal responses to thermal tests. Radiographic examination of the tooth indicated dentin-bridge formation in the pulp chamber and the continuous root formation. This case report demonstrates a fast tissue response both at the pulpal and root dentin level. The use of tricalcium silicate cement should be considered as a conservative intervention in the treatment of symptomatic immature teeth.

• 대한치과의사협회지
• /
• 제53권12호
• /
• pp.958-966
• /
• 2015

Objective: Sodium hypochlorite (NaOCl) decreases the bond strength of resin composite. The purpose of this study was to compare the effect of antioxidant and superficial dentin surface removal on the microtensile bond strength of NaOCl-treated dentin. Materials and Methods: Twenty non-carious human third molars were used in this study. The dentin surfaces were treated with 5.25% NaOCl for 10 min, followed either by treatment with 10% ascorbic acid or superficial dentin surface removal. Two-step self-etch adhesive and resin composite were used for restoration. The bonded specimens were subjected to the microtensile bond strength test. Statistical analysis was performed using one-way analysis of variance (ANOVA) and Tukey's test (p < 0.05). Results: The bond strength after removal of the superficial dentin surface following NaOCl irrigation was similar to that in the control group. The group treated with 10% ascorbic acid demonstrated significantly higher bond strength than the other groups. Conclusion: NaOCl irrigation-induced reduction in dentin bond strength could be recovered by either treatment with 10% ascorbic acid or simple removal of the superficial dentin surface.

• 대한소아치과학회지
• /
• 제30권4호
• /
• pp.581-592
• /
• 2003

본연구는 유치와 영구치의 우식상아질을 제거하는 방법에 따른 상아질표면의 변화와 산부식양상, 혼성층의 양상, 그리고 이들이 상아질에 대한 복합레진의 전단결합강도에 미치는 영향을 평가할 목적으로 시행되었다. 92개의 유구치와 92개의 영구 구치를 준비하여 상아질 표면을 노출시키고 인공우식을 유발시켰다. 이중 32개의 유구치와 32개의 영구구치는 $Carisolv^{TM}$과 bur로 삭제후 상아질표면을 SEM관찰하였으며 나머지 치아에서는 레진-상아질간 전단결합강도를 측정하였다. 두가지 접착시스템(Single bond system, self-etching bonding system)과 한 종류의 레진(Z250, 3M)을 사용하였으며 다음과 같은 결과를 얻었다. 1. $Carisolv^{TM}$의 우식치질 제거효과는 영구치보다 유치에서 더 우수하였으며, bur로 제거한 경우보다 더 거친 상아질 표면이 관찰되었다. 2. 산부식처리한 경우 유치와 영구치 모두 우식제거방법과 관계없이 도말층이 제거된 양상을 보였다. 3. Single bond system을 이용한 경우 두터운 $2-4{\mu}m$의 혼성층과 $10-15{\mu}m$의 adhesive layer가 관찰된 반면, self-etching bonding system에서는 비교적 얇은($1-2{\mu}m$) 혼성층만이 형성되었다. 4. 전단결합강도는 유치와 영구치 모두 우식제거방법에 관계없이 Single bonding agent를 적용한 경우에 self-etching bonding agent를 적용한 군보다 유의하게 높게 나타났다(P<0.05). 5. $Carisolv^{TM}$와 self-etching bonding agent 처리군에서 bur와 self-etching system 처리군보다 다소 높은 전단결합강도를 보였으나 유의성은 없었다(P>0.05).

• 대한소아치과학회지
• /
• 제28권4호
• /
• pp.683-693
• /
• 2001

Er:YAG 레이저는 파장이 물의 주흡수 정점과 일치하는 $2.94{\mu}m$의 방출파장을 가지기 때문에, 물분사를 하면서 사용했을 때, 다른 레이저보다 열손상은 더 작으면서 치아경조직을 보다 효과적으로 삭제한다고 알려져 있다. Er:YAG 레이저의 상아질 삭제 효과를 평가하고자 발거된 소구치와 대구치를 대상으로 상아질 시편을 제작하고 $2.94{\mu}m$의 pulsed Er:YAG 레이저(SDL-300EN, 삼성전자, 한국)를 handpiece형의 전달계를 이용한 비접촉식 방법으로, 물에 담궈진 시간과 레이저 조사시간에 따른 삭제량과 형태를 조사, 분석하여 다음과 같은 결과를 얻었다. 1. 건전 상아질에 대한 조사 결과물에 담군 시간이 증가할수록 삭제율이 증가하였다. 2. 건전 상아질과 우식 상아질에 150mJ, 10Hz의 조건으로, 30초간 레이저를 조사했을 때, 우식상아질에 비해 건전 상아질에서 surface irregularity가 증가하고 상아세관이 열리는 경향이 있었으며 crack이 관찰되었다. 또한 우식 상아질에 비해 많은 탄조각(ash flecks), crack이 관찰되었고 상아세관의 불연속성 (inconsistency)이 관찰되었다. 3. 우식 상아질에서 30초로 조사한 경우에서는 dark zone이 와동에 국한되어 나타났으며 작은 fleck들이 관찰되었고, 1분간 조사한 경우에서는 30초의 경우보다도 와동이 더 넓었으며, crack이 상아세관 주행방향과 직각으로 형성된 것을 관찰 할 수 있었다. 2분간 조사한 경우는 와동이 가장 넓었으며 crack이 더 많이 형성된 것을 볼 수 있었다.

• 대한치과보존학회:학술대회논문집
• /
• 대한치과보존학회 2001년도 추계학술대회(제116회) 및 13회 Workshop 제3회 한ㆍ일 치과보존학회 공동학술대회 초록집
• /
• pp.556-556
• /
• 2001

The application of the laser to the tooth hard tissue started from the removal of carious dentin with the laser performed by Goldman in 1964. With the development of the laser technology, the laser treatment with less descomfort such as pain, vibration, and noise, etc. has been attempted. Since it is difficult to give a suitable form for inlay restoration to a cavity prepared with laser, it has to be restored with adhesive resinous materials. However, various evaluation of adhesive properties of the resinous materials to lased tooth surface on the various conditions such as adgerent, irradiation condition, procedure of bond test, and adhesive materials used, etc. have been reported.(omitted)

• 대한소아치과학회지
• /
• 제36권3호
• /
• pp.348-357
• /
• 2009

본 연구는 유구치 상아질의 각기 다른 부위(표층부, 심층부, 치경부)에서 복합레진 접착제의 접착강도를 비교, 평가하기 위하여 임상에서 흔히 사용하고 있는 서로 다른 4종의 접착방식(3-step total etch: 1군, 2-step total etch: 2군, 2-step self-etch: 3군, all-in-one: 4군)을 적용하고 복합 레진 ($Light-Core^{TM}$ Core Build-Up Composite)을 적층한 후, 미세인장접착강도를 비교하였을 때 다음과 같은 결과를 얻었다. 1. 접착방식간의 비교에서 레진의 접착방식에 따른 상아질 각 부위에서의 미세인장접착강도는 제 1군이 표층부에서 뚜렷이 높았으나(p<0.05) 2, 3, 4군은 부위에 따른 차이가 없었다. 2. 부위별 미세인장접착강도를 비교하여 보았을 때 상아질 표층부에서의 미세인장접착강도는 레진의 접착 방식간에 차이가 없었으나, 심층부에서는 2군, 3군, 4군 및 1군의 순으로 나타났고(p<0.05), 치경부에서는 2군과 3군이 1군과 4군에 비하여 현저히 높았다(p<0.05).

• Restorative Dentistry and Endodontics
• /
• 제23권2호
• /
• pp.597-606
• /
• 1998

The purpose of this study was to evaluate the shear bond strength of the Compoglass Carvifil bonded on the dentin surface according to etching or non-etching and two time application or three time application of single component. Human non-carious 60 extracted 3rd molar were used. The occlusal dentin surfaces of all teeth were exposed with Diamond Wheel Saw and polished with Lapping & Polishing machine(South Bay Technology Co., U.S.A). The teeth were then distributed randomly into four groups of 15 teeth each and dentin surface were conditioned as following. Control group : Non-etching, two times application of Syntac Single Component. (According to manufacture's instruction) Experimental group 1 : Non-etching, three times application of Syntac Single Component. Experimental group : 2 Etching, two times application of Syntac Single Component. Experimental group 3 : Etching, three times application of Syntac Single Component. Compoglass were bonded to exposed dentin surfaces and all samples were placed in distilled water for 7 days. The shear bond strengths were measured by universal testing machine (SHIMADAZU AUTOGRAPH, AGS-4D., Japan). The results were as follows : 1. Experimental group 3 revealed the highest value (30.75${\pm}$4.74 MPa) and control group revealed the lowest value(14.85${\pm}$2.69 MPa). There was significant difference of shear bond strength among four groups(P<0.01) 2. The acid-etching groups (experimental group 2, 3) had higher shear bond strengths than non etching groups(control group and experimental group 1). 3. The additional application of Syntac single component groups revealed a higher bond strength than two times application groups (control group and experimental group 2).