• 로봇학회논문지
• /
• 제18권1호
• /
• pp.110-116
• /
• 2023

In this study describes the design of Exo-suit to assist those who work in unstructured positions. The present study aimed to analyze various types of work, especially those performed in unstructured postures by heavy industry workers. Based on the motion capture analysis results, an attempt was made to develop a shoulder muscle-assistive Exo-suit capable of assisting a wearer who is working using shoulder muscles. In the present study, as the first step of developing a shoulder muscle-assistive Exo-suit, different working scenarios were simulated, and the corresponding motion data were estimated using motion capture devices. The obtained motion data were reflected in the design of the Exo-suit. The main structure of the shoulder muscle-assistive Exo-suit was made of a carbon fiber-reinforced composite to obtain the weight reduction. The shoulder muscle assistive Exo-suit was designed to fully cover the range of motion for workers working in unstructured postures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.153-154
• /
• 2017

Graphene is a nanomaterial and is known to have very high mechanical strength, thermal and electrical properties. However, graphene is known to be difficult to disperse among carbon-based materials due to van der Waals force. In this study, to solve the dispersion problem of graphene nanoplatelet, oxidized graphene nanoplatelet was prepared by oxidizing GNP in nitric acid. The prepared GO was dispersed in ethanol and distilled water before incorporation into the epoxy paint to confirm dispersibility. In addition, GNP/Epoxy and GO/Epoxy tensile specimens were prepared by mixing GNP and GO at 0.1, 0.3, 0.5 and 1.0 wt.% In epoxy coatings and tensile stress-strain characteristics were investigated.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.75-76
• /
• 2022

In the event of a fire in the lower space, a high temperature of 1000℃ or more and an explosive fire may occur due to the closed structural features and combustible materials. On the other hand, more than 90% of oyster shells are made of CaCO₃, and when heated to about 700℃ or higher, CaO and CO₂ is generated due to decarboxylation reaction. In this study, we try to infer the amount generated by CO₂ changing the weight of mortar using oyster shells as fine aggregates after heating. in conclusion It is considered that the smaller the particle, the greater the decarboxylation reaction and the greater the weight change.

• Steel and Composite Structures
• /
• 제49권5호
• /
• pp.503-516
• /
• 2023

In the current examination, a trigonometric shear deformation theory is hired to govern natural frequencies of a functionally graded porous microplate which is covered by two nanocomposite layers. The properties of the structure are varied based on the specified patterns. Utilizing the modified form of couple stress theory for taking the scale effect into account in conjunction with Hamilton's principle, the motion equations are obtained. Then, they are solved via Fourier series functions as an analytical approach. After confirming the results' accuracy, various parameters' effect on the results is investigated. Designing and manufacturing more efficient structures, especially those that are subjected to multi-physical loads can be accounted as findings of this work.

• Transactions on Electrical and Electronic Materials
• /
• 제18권6호
• /
• pp.350-358
• /
• 2017

Recently, owing to increased interest in low-carbon energy supplies, renewable energy sources such as photovoltaics and wind turbines in distribution networks have received considerable attention for generating clean and unlimited energy. The presence of energy storage systems (ESSs) in the promising field of active distribution networks (ADNs) would have direct impact on power system problems such as encountered in probabilistic distributed generation (DG) model studies. Hence, the optimal procedure is offered herein, in which the simultaneous placement of an ESS, photovoltaic-based DG, and wind turbine-based DG in an ADN is taken into account. The main goal of this paper is to maximize the net present value of the loss reduction benefit by considering the price of electricity for each load state. The proposed framework consists of a scenario tree method for covering the existing uncertainties in the distribution network's load demand as well as DG. The collected results verify the considerable effect of concurrent installation of probabilistic DG models and an ESS in defining the optimum site of DG and the ESS and they demonstrate that the optimum operation of an ESS in the ADN is consequently related to the highest value of the loss reduction benefit in long-term planning as well. The results obtained are encouraging.

• 한국재료학회지
• /
• 제23권3호
• /
• pp.190-193
• /
• 2013

Spatial distributions of alloying elements of an Fe-based amorphous ribbon with a nominal composition of $Fe_{75}C_{11}Si_2B_8Cr_4$ were analyzed through the atom probe tomography method. The amorphous ribbon was prepared through the melt spinning method. The macroscopic amorphous natures were confirmed using an X-ray diffractometer (XRD) and a differential scanning calorimeter (DSC). Atom Probe (Cameca LEAP 3000X HR) analyses were carried out in pulsed voltage mode at a specimen base temperature of about 60 K, a pulse to base voltage ratio of 15 %, and a pulse frequency of 200 kHz. The target detection rate was set to 5 ions per 1000 pulses. Based on a statistical analyses of the data obtained from the volume of $59{\times}59{\times}33nm^3$, homogeneous distributions of alloying elements in nano-scales were concluded. Even with high carbon and strong carbide forming element contents, nano-scale segregation zones of alloying elements were not detected within the Fe-based amorphous ribbon. However, the existence of small sub-nanometer scale clusters due to short range ordering cannot be completely excluded.

• 자원리싸이클링
• /
• 제25권5호
• /
• pp.14-27
• /
• 2016

청정석탄기술 중 하나인 석탄가스화 복합발전기술의 이론적 고찰 및 주요단위공정에 사용되는 고온건식 탈황제의 연구 및 기술개발 동향을 조사하였다. 고온건식 탈황제 개발의 중요한 요소는 반응성, 내구성 및 내마모성에 있으며, 탈황제 종류는 칼슘계, 아연계, 망간계, 철계, 구리계 등이 있다. 현재 고온건식 탈황제의 경우 선진국을 중심으로 아연계 탈황제 제조기술이 가장 상용화 단계에 있으며, 국내에서도 다양한 지지체를 사용하여 가격이 저렴하고 성능이 우수한 아연계 및 비아연계 고온건식 탈황제의 상용화를 위한 연구개발이 진행 중에 있다.

• 한국재료학회지
• /
• 제34권3호
• /
• pp.175-183
• /
• 2024

Geopolymer, also known as alkali aluminum silicate, is used as a substitute for Portland cement, and it is also used as a binder because of its good adhesive properties and heat resistance. Since Davidovits developed Geopolymer matrix composites (GMCs) based on the binder properties of geopolymer, they have been utilized as flame exhaust ducts and aircraft fire protection materials. Geopolymer structures are formed through hydrolysis and dehydration reactions, and their physical properties can be influenced by reaction conditions such as concentration, reaction time, and temperature. The aim of this study is to examine the effects of silica size and aging time on the mechanical properties of composites. Commercial water glass and kaolin were used to synthesize geopolymers, and two types of silica powder were added to increase the silicon content. Using carbon fiber mats, a fiber-reinforced composite material was fabricated using the hand lay-up method. Spectroscopy was used to confirm polymerization, aging effects, and heat treatment, and composite materials were used to measure flexural strength. As a result, it was confirmed that the longer time aging and use of nano-sized silica particles were helpful in improving the mechanical properties of the geopolymer matrix composite.

• 생물환경조절학회지
• /
• 제18권4호
• /
• pp.475-480
• /
• 2009

신선 퉁퉁마디의 저장성 향상을 위해 MAP에 적절한 포장재와 저장온도를 구명하고자 본 실험을 수행하였다. 저장중 생체중 감소는 $10^{\circ}C$ 이하의 저온과 무공필름에서는 2% 이하로 유지되었으나 $25^{\circ}C$의 유공필름처리는 4% 이상의 감소를 보이면서 품질저하가 발생하였다. 저장중 포장재내 대기조성은 필름 투과율에 비례하였는데 이산화탄소는 1~2%, 산소는 15% 이상으로 유지되었다. $25^{\circ}C$를 제외한 모든 처리에서 저장 중 포장재내 에틸렌 농도는 7일 이후 급격히 증가하였는데, $2^{\circ}C$에서 가장 높아 저온 장해가 발생한 것으로 추측되었다. 저장 최종일에 이취와 부패율은 $5^{\circ}C$에서 가장 낮았으며, 포장재별로는 다른 양상을 보였는데 저장온도중 가장 낮았던 $5^{\circ}C$에서는 $50{\mu}m$ 두께의 ceramic 필름이 가장 낮은 이취와 부패율을 보였다. 외관상 품질로 본 저장수명 역시 $5^{\circ}C$에서 $50{\mu}m$ ceramic 필름으로 포장하였을 때 28일 이상으로 가장 길었다.

• 전기화학회지
• /
• 제14권3호
• /
• pp.131-137
• /
• 2011

[ $LiMn_2O_4$ ] $Mn^{2+}$이온 용출현상 연구를 위한 간단하고 신속한 전기화학적 $Mn^{2+}$이온 분석법을 정립하였다. 이 분석법은 완충용액에서 $Mn^{2+}$이온이 $Mn^{4+}(MnO_2)$로 산화되는 원리를 이용한다. 최적조건 (pH 8.9 0.04 M $NH_3-NH_4Cl$ 완충용액 및 glassy carbon 작업전극)에서, Linear sweep voltammetry(LSV) 측정에 대해 $5{\mu}M-100{\mu}M$ (0.275-5.5 ppm) $Mn^{2+}$이온 범위에서, differential pulse voltammetry (DPV) 측정에 대해 $0.2{\mu}M-10{\mu}M$ (0.011-0.55 ppm) 범위에서 선형적 응답 특성을 확인하였다. 또한, 측정용액에 리튬 이차전지용 전해액 ($LiPF_6$, EC, EMC)이 첨가할 경우, 첨가량에 비례하여 $Mn^{2+}$ 이온의 산화 전류 감소하였는데, 이러한 감소의 주요 원인은 EMC보다는 $LiPF_6$와 EC성분임을 확인하였다.