• The Journal of Korean Academy of Sensory Integration
• /
• v.17 no.1
• /
• pp.9-18
• /
• 2019

Objective : This study investigated the effect of intensive weight shift training (IWST) on the ability to balance in a sitting posture of children with spastic cerebral palsy (SCP). Methods : One child with spastic diplegia participated in this study for a total of 8 weeks using the ABA experimental design. For the pre-intervention period (A1), general physical therapy (GPT) for children with SCP was performed. The intervention period (B1 and B2), GPT and IWST were conducted for children with SCP, and GPT was conducted again for the post-intervention period (A'1 and A'2). Trunk control capacity was measured using the Korean Trunk Control Measurement Scale (TCMS-K) and Biorescue (RM Ingenierie, France). Results : All TCMS-K variables increased from A1 to B2, and decreased from B2 to A'2. The total area with limit of stability (LOS) increased from A1 to B2, and decreased from B2 to A'2. The ratio of the left/right (Lt/Rt) and anterior/posterior (Ant/Post) LOS area was closer to 1, meaning symmetry, in B2 than in A1. The ratio of the Lt/Rt LOS area decreased further from 1 in A'2 than in B2. The ratio of the Ant/Post LOS area was closer to 1 in A'2 than in B2. Conclusion : IWST had a positive effect on the improvement of balance in the sitting posture of a child with SCP. The results suggest that IWST might help to improve the balance abilities of children with SCP for independent sitting, postural control, and activities of daily living.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.309-311
• /
• 2014

Despite increasing demands for big data application based on the analysis of scattered unstructured data, few relevant studies have been reported. Accordingly, the present study suggests a technique enabling a sentence-based semantic analysis by extracting objects from collected web information and automatically analyzing the relationships between such objects with collective intelligence and language processing technology. To be specific, collected information is stored in DBMS in a structured form, and then morpheme and feature information is analyzed. Obtained morphemes are classified into objects of interest, marginal objects and objects of non-interest. Then, with an inter-object attribute recognition technique, the relationships between objects are analyzed in terms of the degree, scope and nature of such relationships. As a result, the analysis of relevance between the information was based on certain keywords and used an inter-object relationship extraction technique that can determine positivity and negativity. Also, the present study suggested a method to design a system fit for real-time large-capacity processing and applicable to high value-added services.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.5
• /
• pp.1-10
• /
• 2019

Recently, the installation capacity of PV (photovoltaic) systems has been increasing not only field installation but also floating PV, farm land, BIPV/BAPV. For this reason, the new design and materials of PV module are needed. In particular, in order to apply a PV system to a building, lightweight of the PV module is essential. PV modules made of generally used texturing glass are excellent in output and reliability, but there is a limit to the weight that can be reduced. For the lightweight of the PV module, it necessary to use a film instead of a glass. However, the application of film rather than a glass may cause various problems such as decrease in photocurrent by decrease in transmittance and a increase of CTM (cell to module) loss, a degradation of the reliability, and so on. In this paper, PV modules using Ultra barrier film, which is recently a lot of interest as a substitute for a glass, its characteristic analysis and reliability test were conducted. The transmittance and UV characteristics of each material were verified, and the output of the fabricated 1 cell PV module was measured. In addition, 24 cell PV modules were fabricated at the lab-scale and its reliability tests were conducted. As a result of the experiment, the reliability characteristics of the ultra barrier film PV module were excellent, and it was confirmed that it could be used as the front material of the PV module instead of glass

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.550-558
• /
• 2019

As the scale of the Internet of Things (IoT) environment grows and develops day by day, the information collected and shared through IoT devices becomes increasingly diverse and more common. However, because IoT devices have limitations on computing power and a low power capacity due to their miniaturized size, it is difficult to apply security technologies like encryption and authentication that have been directly applied in the previous Internet environment, making the IoT vulnerable to security threats. Because of this weakness, important information that needs to be delivered safely and accurately is exposed to the threat of malicious exploitation, such as data forgery, data leakage, and infringement of personal information. In order to overcome this threat, various security studies are being actively conducted to compensate for the weaknesses in IoT environment devices. In particular, since various devices interact, and share and communicate information collected in the IoT environment, each device should be able to communicate with reliability. With regard to this, various studies have been carried out on techniques for device authentication. This study examines the limitations and problems of the authentication techniques that have been studied thus far, and proposes technologies that can certify IoT devices for safe communication between reliable devices in the Internet environment.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.1-16
• /
• 2018

The decline in the construction industry has led to a decrease the profitability of small and medium-sized landscape contractors. To relieve this situation, small and medium-sized landscape contractors have continued to proactively find ways to enter global construction markets. However, many small and medium-sized landscape contractors face risks due to their lack of capacity and insufficient preparations to extend the business abroad. Thus, this study aims to analyze the current condition of the Vietnamese construction market and the related risk factors. It then suggests strategies to improve the small and medium-sized landscape contractors' competitiveness in that market. We investigated the business climate and analyzed risk factors. Finally, we developed expansion strategies and conducted in-depth interviews with six overseas construction professionals. The study results first showed that efforts to improve infrastructure and the increased demand for housing in Vietnam will lead to more opportunities for small and medium-sized landscape contractors entering the Vietnamese construction market. However, changes in the Vietnamese business climate may act as a variable. Second, we found that small and medium-sized landscape contractors' risk factors are mainly related to laws and regulations, government finance, market fluctuations, public administration system, minimum wage increases, financing and bonds, contracting, trees and materials, and design errors. Finally, small and medium-sized landscape contractors are required to consider the following when seeking to enter the Vietnamese construction market: short-term strategy and mid-to-long-term strategy. This study will be used as the basis for small and medium-sized landscape contractors to plan to enter the Vietnamese construction market and to contribute to the expansion of the global construction market in the landscape industry.

• Journal of the Korean Geotechnical Society
• /
• v.35 no.7
• /
• pp.29-39
• /
• 2019

Load distributive compression anchors distribute the compressive stress in the grout and increase the pull-out capacity of the anchor by using multiple anchor bodies. In this anchor type, the spacing between the anchor bodies has a large influence on the stress in the grout. However, there are few researches about the spacing and there are no design standards. Therefore, the effect of the anchor body spacing on the grout stress was analyzed by performing finite element analyses. First, the applicability of the numerical modeling was verified by comparing with field test results of a compression anchor. Then, the parametric study was performed varying soil type, anchor body spacing, and load magnitude. The analysis results showed that the maximum compressive stress in the grout increased at the narrower spacing and the tensile stress developed at the wider spacing. Therefore, the optimum spacing was defined as the spacing, which prevents the superposition of compressive stresses and minimize the tensile stress. Finally, the optimum spacing was proposed according to the soil type and the load magnitude.

• Plant Journal
• /
• v.14 no.4
• /
• pp.33-38
• /
• 2018

In this study, it was confirmed whether the cooling water bypass ratio of packing for plume abatement matched designed value during winter operation of combined cycle power plant. Designed operating wet bulb temperature of the plume abatement cooling tower with 29 Gcal/h capacity had a range from $13^{\circ}C$ to $-20^{\circ}C$, while its designed bypass ratio was from 0 % to 78%, so that increasing rate of the designed bypass ratio was $2.36%/^{\circ}C$ when the external temperature decreased. When the wet bulb temperature at cooling tower inlet had a range from $7.8^{\circ}C$ to $-11.8^{\circ}C$ in a normal operation, it was measured that actual bypass ratio of packing for plume abatement had a range from 23.8 % to 74.3%. While increasing rate of the actual bypass ratio was $2.71%/^{\circ}C$ in a range from $7.8^{\circ}C$ to $-9.55^{\circ}C$, it was $1.61%/^{\circ}C$ under $-10^{\circ}C$ in cold weather condition according to atmospheric temperature drop, therefore it was confirmed that the increasing rate of the bypass ratio for packing was lowered than its design.

• Journal of Life Science
• /
• v.31 no.2
• /
• pp.175-182
• /
• 2021

Saccharomyces lysate has the well-known function of soothing the skin in various ways: it is an anti-irritant and can treat skin care conditions, such as skin whitening and antioxidative activity. However, data on the safety for use of Saccharomyces lysate in cosmetics and skin care products are still limited. To design a new cosmetic material with antioxidant and skin-whitening effects, 80 yeast strains were isolated from berries grown in Sunchang. Among the isolates, the FT4-4 strain, which exhibited superior biological activities, was selected for further experiments. The FT4-4 strain was identified as Saccharomyces cerevisiae by 18S rRNA gene sequencing analysis. S. cerevisiae FT4-4 showed higher DPPH radical-scavenging (51.41%), superoxide dismutase (62.23%), and tyrosinase inhibition (64.75%) activities. The highest yield of biomass (3.16 g/l) and maximum growth rate of S. cerevisiae FT4-4 were observed within 16 h. Furthermore, the cytotoxicity potential of S. cerevisiae FT4-4 on B16F10 melanoma cells was measured by an MTT assay, and the results indicated that S. cerevisiae FT4-4 had a capacity to inhibit melanin up to 72.02% at an initial 10 mg/ml concentration. These results suggest that S. cerevisiae FT4-4 could be a promising candidate as a multi-functional material for application in the cosmetic industry, especially because of its antioxidant and skin-whitening effects.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.4
• /
• pp.21-32
• /
• 2020

As the global large-scale infrastructure construction market expands, the construction of civil engineering structures in extreme environments such as cold or hot regions is being planned or constructed. Accordingly, the construction of the pile foundation is essential to secure the bearing capacity of the upper structure, but there is a concern about loss of stability and function of the pile foundation due to the possibility of ground deformation in extreme cold and hot regions. Therefore, in this study, a new type of pile foundation is developed to respond with the deformation of the ground, and the ground deformation that can occur in extreme cold and hot region is largely divided into heaving and settlement. The new type of pile foundation is a form in which a cylinder capable of shrinkage and expansion is inserted inside the steel pipe pile, and the effect of the cylinder during the heaving and settlement process was analyzed numerically. As a result of the numerical analysis, the ground heaving caused excessive tensile stress of the pile, and the expansion condition of the cylinder shared the tensile stress acting on the pile and reduced the axial stress acting on the pile. Ground settlement increased the compressive stress of the pile due to the occurrence of negative skin friction. The cylinder must be positioned below the neutral point and behave in shrinkage for optimum efficiency. However, the amount and location of shrinkage and expansion of cylinder must comply with the allowable displacement range of the upper structure. It is judged that the design needs to be considered.

• The Korean Journal of Franchise Management
• /
• v.10 no.2
• /
• pp.33-47
• /
• 2019

Purpose - The purpose of this study is to classify and analyze existing studies from various angles through systematic literature review of how human resources development has been researched in the domestic franchise business. These studies are intended to suggest the direction in which human resource development research should be conducted in the future in the franchise business. Research design, data, and methodology - This study is based on systematic literature review methodology. It has gone through the process of subject language setting, literature search routing, search term selection, literature selection, literature classification and literature analysis. The systematic literature review identified 59 peer-reviewed dissertations and scientific journal publications on the subject of HRD in Korea franchise business. Result - This study analyzed by research methods, research industries, research population and dependent variable using the systematic review process. The literature studied in the 2000s mainly led to research on education and training of franchise employees in beauty franchise business. In the literature studied since 2010, human resources development was mainly studied in the supervisor in the restaurant franchise business, and in the study of competence rather than education and training. According to the research methods, statistical methods were mostly relatively simple, such as t-test or one-way distribution analysis until the 2000s, and after 2010, in-depth and structural studies using multiple return analysis, structural method analysis, path analysis, multi-dimensional scale analysis, AHP, etc were conducted. When classified by study dependant, early research until the 2000s focused on the study of education and training, which is an independent variable, on the satisfaction of education programs, job satisfaction, and immersion. On the other hand, studies conducted since 2010 have produced more complex results using various medium variants, and those related to management performance and relationship performance have been mainly studied, rather than the satisfaction of the education itself. Conclusions - While the domestic franchise business is expanding in terms of quantity, such as the number of franchises and franchises, the development in terms of quality for the joint growth of franchises and franchisees is still lacking. In order for the franchisee to continue to grow with each other, the franchisee must identify and develop their current performance or expected capabilities through capacity modeling at various targets and levels.