• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.37-46
• /
• 2018

Present research is to evaluate and improve the sealing performance of the duct cap assembly for the ice dispensers through structural analysis. The nonlinear contact problems to check the sealing performance were analyzed using ANSYS software. The results of the analyses related to the sealing performance: the displacement distribution, the contact condition between the cap-silicon and the case, and the pressure distribution on the contact surface, were examined and discussed. Based on the results of the existing design of the duct cap assembly, two cases of the design modifications to improve the sealing performance were introduced. By examining the results of the two cases, a final design improvement plan was proposed and analyzed. It is shown that the sealing performance of the proposed final design is much more favorable than the existing design. The method of structural analysis and design improvement of the duct cap assembly presented in this paper will help improve the sealing performance of the ice dispenser duct caps.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.627-628
• /
• 2009

• 산업경영시스템학회지
• /
• 제34권1호
• /
• pp.90-96
• /
• 2011

The shock absorber base assembly is one of the parts in the shock absorber equipment that controls the vehicle movement. It absorbs the shock and vibration to guarantee riding stability and comfort. It demands strength, reliability and strict airtightness of the welded section because the shock absorber base assembly is a container which resists pressure and needs durability by being filled with gas and oil. However, the current engineering needs a lot of production time, has a high cost and shows a low production rate. These problem due to the eight production processes, four of which are spot welding, reinforcement welding like metal active welding (MAG), prior process of the base assembly cap and tube for precision and pressing. We will analyze the manufacturing processes of the base assembly and suggest an improved manufacturing method that uses frictional welding. The results will show that the new method of the frictional welding is better than the previous welding technique. Through the use of this concept of frictional welding, the welding conjunction will be strengthened, measurements will be more precise, and the cost and the number of processes will be reduced.

• 대한기계학회논문집A
• /
• 제32권5호
• /
• pp.402-410
• /
• 2008

The heavy duty diesel engine must have a large output for maintaining excellent mobility. In this study, a three dimensional finite element model of a heavy-duty diesel engine was developed to conduct the stress analysis. The FE model of the heavy duty diesel engine main parts consisting with four half cylinder was selected. The heavy duty diesel engine parts includes with cylinder block, cylinder head, gasket, liner, bearing cap, bearing and bolts. The loading conditions of engine were pre-fit load, assembly load, and gas load. As the results of structural analysis, because the stress values of cylinder block and bearing cap did not exceed the basic design can be satisfied. But on the part which contacts with cylinder block and bearing cap the stress value exceeds the allowable strength of material. In order to decrease the stress at that part, it was optimized with parametric study.

• 마이크로전자및패키징학회지
• /
• 제26권2호
• /
• pp.31-43
• /
• 2019

본 연구에서는 유연한 접속부를 갖는 유연전자 패키지 플립칩 접속을 위해 폴리머 탄성범프를 제작하였으며, 범프의 온도 및 하중에 따른 폴리머 탄성 범프의 점탄성 및 점소성 거동을 해석 및 실험적으로 분석하고 비교 평가하였다. 폴리머 탄성 범프는 하중에 의한 변형이 용이하여 범프 높이 평탄도 오차의 보정이 용이할 뿐만 아니라 소자가 형성된 칩에 가해지는 응력 집중이 감소하는 것을 확인하였다. 폴리머 탄성 범프의 과도한 변형에 따른 Au Metal Cap Crack 현상을 보완하여 $200{\mu}m$ 직경의 Spiral Cap Type, Spoke Cap type 폴리머 탄성 범프 형성 기술을 개발하였다. 제안된 Spoke Cap, Spiral Cap 폴리머 탄성 범프는 폴리머 범프 전체를 금속 배선이 덮고 있는 Metal Cap 범프에 비해 범프 변형에 의한 응력 발생이 적음을 확인할 수 있으며 이는 폴리머 범프 위의 금속 배선이 부분적으로 패터닝되어 있어 쉽게 변형될 수 있는 구조이므로 응력이 완화되는데 기인하는 것으로 판단된다. Spoke cap type 범프는 패드 접촉부와 전기적 접속을 하는 금속 배선 면적이 Spiral Cap type 범프에 비해 넓어 접촉 저항을 유지하면서 동시에 금속 배선에 응력 집중이 가장 낮은 결과를 확인하였다.

• 한국버섯학회지
• /
• 제20권2호
• /
• pp.43-49
• /
• 2022

Pleurotus ostreatus is a globally cultivated mushroom crop. Cap color is a quality factor in P. ostreatus. However, cap color can spontaneously mutate, degrading the quality of the mushroom on the market. Early detection and removal of mutant strains is the best way to maintain the commercial value of the crop. To detect the cap color mutant Gonji7ho, molecular markers were developed based on insertion/deletions (InDels) derived from the comparison of mitogenomes of Gonji7ho and Gonji7hoM mushrooms. Sequencing, assembly, and comparative analysis of the two mitogenomes revealed genome sizes of 73,212 bp and 72,576 bp with 61 and 57 genes or open reading frames (ORFs) in P. ostreatus Gonji7ho and Gonji7hoM, respectively. Fourteen core protein-encoding genes, two rRNA, and 24 tRNA with some OFRs were predicted. Of the 61 genes or OFRs in the wild type, dpo, rpo, and two orf139 were missing (or remnant) in the mutant strain. Molecular markers were developed based on the sequence variations (InDels) between the two mitogenomes. Six polymorphic molecular markers could detect the mutated mitochondria by PCR. These results provide basic knowledge of the mitogenomes of wild-type and mutant P. ostreatus, and can be applied to discriminate mutated mitochondria.

• 통합자연과학논문집
• /
• 제12권4호
• /
• pp.127-132
• /
• 2019

Programmed cell death 4 (PDCD4) is a novel tumor suppressor that function in the nucleus and the cytoplasm and appears to be involved in the regulation of transcription and translation. Stress granules (SGs) are cytoplasmic foci at which untranslated mRNAs accumulate when cells exposed to environmental stresses. Since PDCD4 has implicated in translation repression through direct interaction with eukaryotic translation initiation factor 4A (eIF4A), we here investigated if PDCD4 has a functional role in the process of SG assembly under oxidative stresses. Using immunofluorescence microscopy, we found that PDCD4 is localized to SGs under oxidative stresses. Next, we tested if knockdown of PDCD4 has an effect on the assembly of SG using PDCD4-specific siRNA. Interestingly, SG assembly was accelerated and this effect was caused by sensitization of phosphorylation of eIF2α and dephosphorylation of eIF4E binding protein (4E-BP). These results suggest that PDCD4 has an effect on SG dynamics and possibly involved in cap-dependent translation repression under stress conditions.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.435-440
• /
• 2004

The nonlinear impacts between the Control Element Drive Mechanisms (CEDMs) seismic cap plates installed on the CEDM top of a pressurized water reactor are studied with the dynamically reduced models of the CEDM and Integrated Head Assembly (IHA). It is important to develope nonlinear models considering the gap effects between the plates. In order to simulate impacts, reduced models for the primary structures, such as CEDM and IHA, are developed through simplifying detailed models, and the nonlinear structural analysis is performed under seismic loading conditions. The responses are examined in various gap sizes depending on the reactor operating conditions.

• 대한전자공학회논문지
• /
• 제19권4호
• /
• pp.26-30
• /
• 1982

PLA는 다입방-다출력에 적합하지만 입력변수의 증가와 적항의 증가에 따라 종래의 방법으로는 테스트 입력의 생성이 곤란하게 된다. 본 논문에서는 이와 같은 테스트 입방을 구하기 위하여 sharp 연산과 cap 연산을 동시에 처리하는 효과적인 컴퓨터 알고리듬을 구성하고 이것을 프로그램에 의해서 실증하였다.

• 한국광학회지
• /
• 제32권2호
• /
• pp.49-54
• /
• 2021

본 논문에서는 고출력 광섬유 레이저의 핵심 부품인 대구경 광섬유 엔드캡을 제작하는 장비를 설계 및 제작하였으며, 제작장비를 이용하여 대구경 광섬유 엔드캡을 제작하였다. 대구경 광섬유 엔드캡 제작장비는 레이저 광을 조사하여 접속 열원으로 사용하기 위한 CO2 레이저 광원부, 대구경 광섬유와 엔드캡의 위치를 이송하기 위한 정밀 스테이지 조립체, 스테이지 조립체와 연동되어 융착 시 정렬에 사용되는 비전 시스템으로 구성되어 있다. 레이저 광원의 출력은 스테이지 조립체와 연동되어 출력을 제어하며, 비전 시스템으로 대구경 편광유지 광섬유의 편광축을 정렬할 수 있도록 제작되었다. 자체 제작한 장비를 이용하여 클래드 직경이 400 ㎛인 대구경 편광유지 광섬유와 10(W)×5(D)×2(H) ㎣의 엔드캡을 레이저 융착하여 대구경 광섬유 엔드캡을 제작하였다. 제작된 대구경 광섬유 엔드캡의 신호광 삽입손실, 소광률 및 빔품질(M2)은 각각 0.6%, 16.7 dB, M2x=1.21, M2y=1.22로 측정되었다.