• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.2
• /
• pp.37-46
• /
• 2018

Present research is to evaluate and improve the sealing performance of the duct cap assembly for the ice dispensers through structural analysis. The nonlinear contact problems to check the sealing performance were analyzed using ANSYS software. The results of the analyses related to the sealing performance: the displacement distribution, the contact condition between the cap-silicon and the case, and the pressure distribution on the contact surface, were examined and discussed. Based on the results of the existing design of the duct cap assembly, two cases of the design modifications to improve the sealing performance were introduced. By examining the results of the two cases, a final design improvement plan was proposed and analyzed. It is shown that the sealing performance of the proposed final design is much more favorable than the existing design. The method of structural analysis and design improvement of the duct cap assembly presented in this paper will help improve the sealing performance of the ice dispenser duct caps.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.06a
• /
• pp.627-628
• /
• 2009

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.90-96
• /
• 2011

The shock absorber base assembly is one of the parts in the shock absorber equipment that controls the vehicle movement. It absorbs the shock and vibration to guarantee riding stability and comfort. It demands strength, reliability and strict airtightness of the welded section because the shock absorber base assembly is a container which resists pressure and needs durability by being filled with gas and oil. However, the current engineering needs a lot of production time, has a high cost and shows a low production rate. These problem due to the eight production processes, four of which are spot welding, reinforcement welding like metal active welding (MAG), prior process of the base assembly cap and tube for precision and pressing. We will analyze the manufacturing processes of the base assembly and suggest an improved manufacturing method that uses frictional welding. The results will show that the new method of the frictional welding is better than the previous welding technique. Through the use of this concept of frictional welding, the welding conjunction will be strengthened, measurements will be more precise, and the cost and the number of processes will be reduced.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.5
• /
• pp.402-410
• /
• 2008

The heavy duty diesel engine must have a large output for maintaining excellent mobility. In this study, a three dimensional finite element model of a heavy-duty diesel engine was developed to conduct the stress analysis. The FE model of the heavy duty diesel engine main parts consisting with four half cylinder was selected. The heavy duty diesel engine parts includes with cylinder block, cylinder head, gasket, liner, bearing cap, bearing and bolts. The loading conditions of engine were pre-fit load, assembly load, and gas load. As the results of structural analysis, because the stress values of cylinder block and bearing cap did not exceed the basic design can be satisfied. But on the part which contacts with cylinder block and bearing cap the stress value exceeds the allowable strength of material. In order to decrease the stress at that part, it was optimized with parametric study.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.2
• /
• pp.31-43
• /
• 2019

In this study, polymer elastic bumps were fabricated for the flexible electronic package flip chip bonding and the viscoelastic and viscoplastic behavior of the polymer elastic bumps according to the temperature and load were analyzed using FEM and experiments. The polymer elastic bump is easy to deform by the bonding load, and it is confirmed that the bump height flatness problem is easily compensated and the stress concentration on thin chip is reduced remarkably. We also develop a spiral cap type and spoke cap type polymer elastic bump of $200{\mu}m$ diameter to complement Au metal cap crack phenomenon caused by excessive deformation of polymer elastic bump. The proposed polymer elastic bumps could reduce stress of metal wiring during bump deformation compared to metal cap bump, which is completely covered with metal wiring because the metal wiring on these bumps is partially patterned and easily deformable pattern. The spoke cap bump shows the lowest stress concentration in the metal wiring while maintaining the low contact resistance because the contact area between bump and pad was wider than that of the spiral cap bump.

• Journal of Mushroom
• /
• v.20 no.2
• /
• pp.43-49
• /
• 2022

Pleurotus ostreatus is a globally cultivated mushroom crop. Cap color is a quality factor in P. ostreatus. However, cap color can spontaneously mutate, degrading the quality of the mushroom on the market. Early detection and removal of mutant strains is the best way to maintain the commercial value of the crop. To detect the cap color mutant Gonji7ho, molecular markers were developed based on insertion/deletions (InDels) derived from the comparison of mitogenomes of Gonji7ho and Gonji7hoM mushrooms. Sequencing, assembly, and comparative analysis of the two mitogenomes revealed genome sizes of 73,212 bp and 72,576 bp with 61 and 57 genes or open reading frames (ORFs) in P. ostreatus Gonji7ho and Gonji7hoM, respectively. Fourteen core protein-encoding genes, two rRNA, and 24 tRNA with some OFRs were predicted. Of the 61 genes or OFRs in the wild type, dpo, rpo, and two orf139 were missing (or remnant) in the mutant strain. Molecular markers were developed based on the sequence variations (InDels) between the two mitogenomes. Six polymorphic molecular markers could detect the mutated mitochondria by PCR. These results provide basic knowledge of the mitogenomes of wild-type and mutant P. ostreatus, and can be applied to discriminate mutated mitochondria.

• Journal of Integrative Natural Science
• /
• v.12 no.4
• /
• pp.127-132
• /
• 2019

Programmed cell death 4 (PDCD4) is a novel tumor suppressor that function in the nucleus and the cytoplasm and appears to be involved in the regulation of transcription and translation. Stress granules (SGs) are cytoplasmic foci at which untranslated mRNAs accumulate when cells exposed to environmental stresses. Since PDCD4 has implicated in translation repression through direct interaction with eukaryotic translation initiation factor 4A (eIF4A), we here investigated if PDCD4 has a functional role in the process of SG assembly under oxidative stresses. Using immunofluorescence microscopy, we found that PDCD4 is localized to SGs under oxidative stresses. Next, we tested if knockdown of PDCD4 has an effect on the assembly of SG using PDCD4-specific siRNA. Interestingly, SG assembly was accelerated and this effect was caused by sensitization of phosphorylation of eIF2α and dephosphorylation of eIF4E binding protein (4E-BP). These results suggest that PDCD4 has an effect on SG dynamics and possibly involved in cap-dependent translation repression under stress conditions.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.435-440
• /
• 2004

The nonlinear impacts between the Control Element Drive Mechanisms (CEDMs) seismic cap plates installed on the CEDM top of a pressurized water reactor are studied with the dynamically reduced models of the CEDM and Integrated Head Assembly (IHA). It is important to develope nonlinear models considering the gap effects between the plates. In order to simulate impacts, reduced models for the primary structures, such as CEDM and IHA, are developed through simplifying detailed models, and the nonlinear structural analysis is performed under seismic loading conditions. The responses are examined in various gap sizes depending on the reactor operating conditions.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.19 no.4
• /
• pp.26-30
• /
• 1982

It is a time-consuming wort to generate test inputs of a PLA as inputs and Product terms are increasing. In this paper we design a computer algorithm which is efficient for processing sharp and cap operator simultaneously. An assembly language program is coded and run successfully.

• Korean Journal of Optics and Photonics
• /
• v.32 no.2
• /
• pp.49-54
• /
• 2021

In this paper, we design and construct the equipment to manufacture large-diameter optical fiber end caps, which are the core parts of high-power fiber lasers, and we fabricate large-diameter optical fiber end caps using the home-made equipment. This equipment consists of a CO2 laser as a fusion-splice heat source, a precision stage assembly for transferring the position of a large-diameter optical fiber and an end cap, and a vision system used for alignment when the fusion splice is interlocked with the stage assembly. The output of the laser source is interlocked with the stage assembly to control the output, and the equipment is manufactured to align the polarization axis of the large-diameter polarization-maintaining optical fiber with the vision system. Optical fiber end caps were manufactured by laser fusion splicing of a large-diameter polarization-maintaining optical fiber with a clad diameter of 400 ㎛ and an end cap of 10×5×2 ㎣ (W×D×H) using home-made equipment. Signal-light insertion loss, polarization extinction ratio, and beam quality M2 of the fabricated large-diameter optical fiber end caps were measured to be 0.6%, 16.7 dB, and 1.21, respectively.