• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.935-941
• /
• 1998

Experiments were carried out for a cubic cavity flow. Contrinuous shear stress is supplied by driven flow for high Reynolds number and three kinds of aspect ratios. Velocity vectors are obtained by PIV and they are used as velocity components for Poisson equation for pressure, Related boundary conditions and no-slip condition at solid wall and the linear velocity extrapolation on the upper side of cavity are well examined for the present study. For calculation of pressure resolution of grid is basically $40{\times}40$ and 2-dimensional uniform mesh using MSC staggered grid is adopted. The flow field within the cavity maintains a forced-vortex formation and almost of the shear stress from the driving inflow is transformed into rotating flow energy and the size of the distorted forced-vortex increases with increment of Reynolds number

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.789-792
• /
• 2003

Pipe inspection has a great importance to ensure safety for the nuclear power plant. In this paper, we designed visual inspection module for the tube internal, which diameter is 15${\sim}$20mm. And we made inspection module which consisted of CCD camera and light. And the relation between image and real world coordinate is established. Image processing is performed to calculate mapping parameter and analyze the size of defect. For the calculation of mapping parameter, experiment is performed using grid type test pattern. Acquired image is processed to extract image coordinate. Edge detection, thresholding, median filtering and morphology filtering is applied to extract grid pattern. Extracted image coordinate is used to calculate image to real world mapping. Lens distortion was considered and corrected to get exact data. Coordinate transformation data is provided for the users to recognize easily. Experiment was performed using grid type test pattern, we extracted lens distortion parameter and real coordinate of defect point. Radial distortion of lens was corrected but tangential distortion was not considered. As continuum to this study, the tangential distortion of lens is considered and improvement of analy zing technique for the tube internal be explored continuously.

• 조명전기설비학회논문지
• /
• 제28권3호
• /
• pp.72-77
• /
• 2014

The cross-section area of cable in the Offshore Wind Farm (OWF) is smaller than that in the onshore wind farm. Because the power loss in OWF is large relatively, the power loss is a key element for the economic evaluation of OWF design. The availability of wind turbine in OWF and the size of OWF are larger than those of onshore wind farm. If the economic evaluation of OWF ignores the availability of wind turbines, the power loss cost of OWF is overpriced. Since there are so many wind turbines, also, the calculation of power loss should be more accurate. In this paper, a method to calculate power loss is proposed for the design of big and complex inner-grid in OWF. The 99.5MW OWF is used for case study to see what effect the proposed method have on the power loss cost.

• 대한공간정보학회지
• /
• 제24권3호
• /
• pp.85-92
• /
• 2016

토지 개발 인허가 기준에는 중요 요소로서 경사도가 포함되어 있다. 토지 적성 평가 지침, 산지전용허가기준 등에는 수치지형도상 평가대상 토지의 평균경사도를 측정하여 경사도로 사용하며, GIS를 적용할 수 있다고 규정되어 있다. 입력 자료로는 국토지리정보원의 1/5,000 수치지형도 외에 한국토지정보시스템 전산자료를 활용 가능한 자료로 예시하고 있다. 경사도 계산에는 수치지형도의 등고선을 이용한 방법, 이를 DEM으로 변환하여 이용하는 방법 등 다양한 방법이 제시되고 있으나 표준화된 경사도 계산 방법은 제시되지 못하고 있어 실무에서 혼란이 발생하고 있다. 이러한 혼란을 감소시키기 위하여 본 연구에서는 표준화된 경사도 계산 방법과 적정 해상도를 결정할 수 있는 방안을 제안하고자 하였다. 경사도 계산에 사용되는 여러 방법을 분석한 결과, 지형의 복잡성을 고려하여 결정된 해상도를 가진 DEM을 만들어 유한차분법을 이용하여 평균경사도를 계산하는 개선된 방안을 제시하였다.

• KEPCO Journal on Electric Power and Energy
• /
• 제8권2호
• /
• pp.159-179
• /
• 2022

Often a network becomes complex, and multiple entities would get in charge of managing part of the whole network. An example is a utility grid. While the entire grid would go under a single utility company's responsibility, the network is often split into multiple subsections. Subsequently, each subsection would be given as the responsibility area to the corresponding sub-organization in the utility company. The issue of how to make subsystems of adequate size and minimum number of interconnections between subsystems becomes more critical, especially in real-time simulations. Because the computation capability limit of a single computation unit, regardless of whether it is a high-speed conventional CPU core or an FPGA computational engine, it comes with a maximum limit that can be completed within a given amount of execution time. The issue becomes worsened in real time simulation, in which the computation needs to be in precise synchronization with the real-world clock. When the subject of the computation allows for a longer execution time, i.e., a larger time step size, a larger portion of the network can be put on a computation unit. This translates into a larger margin of the difference between the worst and the best. In other words, even though the worst (or the largest) computational burden is orders of magnitude larger than the best (or the smallest) computational burden, all the necessary computation can still be completed within the given amount of time. However, the requirement of real-time makes the margin much smaller. In other words, the difference between the worst and the best should be as small as possible in order to ensure the even distribution of the computational load. Besides, data exchange/communication is essential in parallel computation, affecting the overall performance. However, the exchange of data takes time. Therefore, the corresponding consideration needs to be with the computational load distribution among multiple calculation units. If it turns out in a satisfactory way, such distribution will raise the possibility of completing the necessary computation in a given amount of time, which might come down in the level of microsecond order. This paper presents an effective way to split a given electrical network, according to multiple criteria, for the purpose of distributing the entire computational load into a set of even (or close to even) sized computational loads. Based on the proposed system splitting method, heavy computation burdens of large-scale electrical networks can be distributed to multiple calculation units, such as an RTDS real time simulator, achieving either more efficient usage of the calculation units, a reduction of the necessary size of the simulation time step, or both.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권6호
• /
• pp.334-338
• /
• 2006

The finite volume time domain(FVTD) method gives accurate results for the calculation of electromagnetic wave propagation but it should be noted that the number of sampling points per wavelength should be increased when more accurate numerical results are required. Moreover it requires large amount of computer memory resources. In this paper we propose a modified FVTD that employs a time subdivision. The local time-subdivided FVTD(FVTD-LTS) method is enough to divide the space domain grid with a large step size. This method can reduce computation time and memory resources. To validate the proposed method, sever numerical examples are presented. We have then shown that the proposed method yields a reasonable solution.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권9호
• /
• pp.923-928
• /
• 2015

FDS는 화재분석에 가장 많이 사용되는 프로그램 중 하나로 정확한 분석을 위하여 적정격자 선정이 필요하다. 이 연구에서는 적정격자 선정을 위하여 다양한 격자 종횡비(AR)를 선정하여 FDS v 6.1.2로 분석하였다. 계산시간은 온도 등의 변화로부터 시간평균값을 구하는데 충분히 긴 10분으로 설정하였다. 그리고 온도와 가시거리, 질량수지의 시간평균값은 준정상상태를 유지하는 200~600초 구간의 값으로부터 구하였다. 그 결과 $10{\times}10{\times}3[m^3]$와 $20{\times}20{\times}3[m^3]$의 두 공간에 각각 1 [MW]와 2 [MW]의 폴리우레탄 화재가 발생했을 때 종횡비 1~6에 대한 열방출률과 온도, 가시거리, 질량수지를 비교하였다. 열방출률은 종횡비와 공간의 크기 및 화재규모에 무관하게 정확함을 확인하였다. 또 $AR{\leq}5$에서는 준정상상태의 온도와 가시거리가 잘 예측되었다. 그러나 종횡비의 증가에 따라 온도의 감소폭이 증가하였고, 질량보존의 만족도가 떨어졌다. 따라서 화재 초기의 온도와 가시거리가 중요한 요소인 성능위주설계에서 $AR{\geq}3$인 경우에는 격자크기에 대한 세심한 검토가 필요함을 확인하였다. 높은 정확도가 요구되는 구획화재 시뮬레이션에는 수직방향 격자크기 0.1~0.2 [m] 이하와 종횡비 2 이하의 격자크기가 바람직함을 알 수 있었다.

• 대한토목학회논문집
• /
• 제37권3호
• /
• pp.521-529
• /
• 2017

본 연구에서는 합성형교와는 다른 전단연결 상세를 가지는 콘크리트 비충전 강합성 바닥판의 유효폭을 수치적으로 분석하였다. 유효폭 산정 방법 및 위치, 작용하중 크기, 메인 베아링 바 간격-지간장비에 따른 콘크리트 비충전 강합성 바닥판의 유효폭을 평가하였다. 분석 결과 응력 형태를 사다리꼴로 이상화하여 유효폭을 산출하여도 실제 유효폭과 거의 동일한 것으로 분석되었다. 또한, 전단 강도 증가를 위해 적용된 전단홀 관통 철근이 유효폭을 증가 시키는 역할을 하는 것으로 나타났다. 메인 베아링 바 간격-지간장비에 따른 유효폭 분석 결과로부터 콘크리트 비충전강합성 바닥판의 유효폭비를 산출 할 수 있는 보정 계수를 제안하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.700-710
• /
• 2008

A Bubble size distribution model has been developed for the numerical simulation of cryogenic high-speed cavitating flow of the turbo-pumps in the liquid fuel rocket engine. The new model is based on the previous one proposed by the authors, in which the bubble number density was solved as a function of bubble size at each grid point of the calculation domain by means of Eulerian framework with respect to the bubble size coordinate. In the previous model, the growth/decay of bubbles due to pressure difference between bubble and liquid was solved exactly based on Rayleigh-Plesset equation. However, the unsteady heat transfer between liquid and bubble, which controls the evaporation/condensation rate, was approximated by a theoretical solution of unsteady heat conduction under a constant temperature difference. In the present study, the unsteady temperature field in the liquid around a bubble is also solved exactly in order to establish an accurate and efficient numerical simulation code for cavitating flows. The growth/decay of a single bubble and growth of bubbles with nucleation were successfully simulated by the proposed model.

• 한국안전학회지
• /
• 제39권1호
• /
• pp.96-103
• /
• 2024

The demand for mass calculation of offsite consequence analysis to conduct exhaustive single-unit or multi-unit Level 3 PSA is increasing. In order to perform efficient offsite consequence analyses, the Korea Atomic Energy Research Institute is conducting model optimization studies to minimize the analysis time while maintaining the accuracy of the results. A previous study developed a model optimization method using efficient plume segmentation and verified its effectiveness. In this study, we investigated the possibility of optimizing the model through particle size distribution setting by checking the reduction in analysis time and deviation of the results. Our findings indicate that particle size distribution setting affects the results, but its effect on analysis time is insignificant. Therefore, it is advantageous to set the particle size distribution as fine as possible. Furthermore, we evaluated the effect of multithreading and confirmed its efficiency. Future optimization studies should be conducted on various input factors of offsite consequence analysis, such as spatial grid settings.