• Korean Journal of Metals and Materials
• /
• v.49 no.3
• /
• pp.256-263
• /
• 2011

We have synthesized Al-Co/AlN-Co multilayer films with different layer thicknesses by using a Two-Facing Target Type dc Sputtering (TFTS) system. The deposited films were annealed isothermally at different temperatures and their microstructure, magnetic properties and resistivity were investigated. The magnetization of the as-deposited films was found to be very small, irrespective of layer thickness. It was found that the annealing conditions and layer thickness ratio of Al-Co to AlN-Co (LTR) were able to control the microstructure, as well as the physical properties of the prepared films. The resistivity and magnetization increased and the coercivity decreased with a decreasing LTR. A high resistivity of 2500 ${\mu}{\Omega}-cm$, a magnetization of 360 $emu/cm^3$, and a coercivity of 5 Oe were obtained for the films with LTR=0.175.

• Proceedings of the KSAR Conference
• /
• 2001.03a
• /
• pp.67-67
• /
• 2001

전기자극은 핵이식 시 수핵난자와 공여핵의 융합을 위해 보편적으로 사용되는 방법이다(Robl, 1999). 그러나 부적절한 전기자극은 수핵난자 세포질에 해를 입히고, 이후의 배발달에 좋지 않은 영향을 준다. 본 실험은 체세포 핵이식을 \circled1 1.9㎸/cm, 20$\mu\textrm{s}$ 2회, \circled22.0㎸/cm, 20$\mu\textrm{s}$ 2회, \circled32.2㎸/cm, 10$\mu\textrm{s}$ 2회, 및 \circled41.9㎸/cm, 30$\mu\textrm{s}$ 2회의 전기자극으로 융합을 실시하여 각 자극 별 융합율과 난자의 lysis율을 비교하고, 배양 후 배반포 발생율을 조사하였다. 공여핵은 칡소의 귀 세포를 10% FBS가 첨가된 DMEM에서 39$^{\circ}C$, 5%$CO_2$의 incubator에서 배양하여 monolayer confluent형성 후 0.5% FBS가 첨가된 DMEM에서 3-4일간 배양 후 trypsin처리하여 제핵된 체외성숙 난자에 핵이식하였다. \circled1,\circled2,\circled3,\circled4의 핵이식 조건을 이용하여 공여핵의 체세포와 수핵란 세포질간의 융합을 유도한 결과, 융합율은 각각 50.7%, 48.1%, 65.5%, 및 33.3%였으며, 수핵난자의 세포질 lysis율은 39.%1, 41.7%, 22.6%,및 52.7%으로 \circled32.2㎸/cm, 10$\mu\textrm{s}$ 2회의 조건에서 융합율이 유의적으로 높았고, 수핵난자의 세포질 lysis율에 있어서도 다른 군에 비하여 낮았다 각각의 핵이식 조건별로 융합한 후 난할율 및 배반포 발생율은 각각 65.7%, 73.5%, 77.2%, 및 53.3%과 47.8%, 52.0%, 49.7%, 및 21.8%로 나타나 난할율 및 배반포 발생율에 있어서 융합조건에 따라 큰 차이는 없었으나 1.9㎸/cm, 30$\mu\textrm{s}$ 2회의 조건이 다른 조건들에 비하여 유의적으로 낮았다. 따라서, 체세포와 수핵란 세포질간의 융합율과 배반포 발생에 미치는 영향은 전압보다는 시간에 더 크게 받음을 알 수 있었으며, 이와 같은 결과에서 융합시 시간을 오래 주는 것보다 전압을 높이는 것이 수핵난자의 세포질에 상해를 줄이고 이후 배반포 발생에 유리할 것으로 사료되었다.

• Journal of the Korean Ceramic Society
• /
• v.21 no.3
• /
• pp.231-238
• /
• 1984

Heavy metal fluoride glasses exhibit considerable promise as high transparency materials from the UV to the IR. These glasses are prepared by fusion of the mixture of metal fulorides($ZrF_4$, $BaF_2$, $LaF_3$ etc) at 800-1, 00$0^{\circ}C$ under the inert$(N_2)$ or reactive ($CCl_4$, $Cl_2$) atmosphere following the casting into glass on cooling. Infrared absorption at the 3, 400 cm-1 -OH peak has been measured as a function of thickness for several ZrF-$BaF_2$-LaF and $HfF_4$-$BaF_2$-$LaF_3$ glasses to separate contributions from bulk and surface -OH. For glasses melted under $CCl_4$ reactive atmosphere the peak is due almost entirely to surface-OH. and melting in a closed reactor was best for removing -OH. In ambient atmosphere the -OH peak exhibited no time dependence over a 30 d period indicating a very small rate of surface attack by atmospheric H2O. Removal of -OH absorption processing was generally easier and more complete for the $BaF_2$/ThF4-glasses than for the $ZrF_4$-or $HfF_4$-based glasses.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.471-477
• /
• 2003

This paper presents an algorithm that automatically extracts buildings among many different features on the earth surface by fusing LIDAR data with panchromatic aerial images. The proposed algorithm consists of three stages such as point level process, polygon level process, parameter space level process. At the first stage, we eliminate gross errors and apply a local maxima filter to detect building candidate points from the raw laser scanning data. After then, a grouping procedure is performed for segmenting raw LIDAR data and the segmented LIDAR data is polygonized by the encasing polygon algorithm developed in the research. At the second stage, we eliminate non-building polygons using several constraints such as area and circularity. At the last stage, all the polygons generated at the second stage are projected onto the aerial stereo images through collinearity condition equations. Finally, we fuse the projected encasing polygons with edges detected by image processing for refining the building segments. The experimental results showed that the RMSEs of building corners in X, Y and Z were ${\pm}$8.1cm, ${\pm}$24.7cm, ${\pm}$35.9cm, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.6
• /
• pp.291-295
• /
• 2013

Surface chemical modification via air and hydrogen heat treatment was found to relieve the aggregation of nanodiamond (ND) seed particles and lead to a significantly enhanced nucleation density for ultrananocrystalline diamond (UNCD) film growth. After heat treatment in air and hydrogen, modification of surface functionalities and increase in the zeta potential were observed. Mean size of the ND aggregates was also dramatically reduced from ${\sim}2{\mu}m$ to ~55 nm. Si surface seeded with ND particles heat-treated at $600^{\circ}C$ in hydrogen produced a much higher nucleation density of ${\sim}2.7{\times}10^{11}cm^{-2}$ compared to untreated ND seeds.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.585-597
• /
• 2009

This research aims to develop a registration method to remove the geometric inconsistency between aerial images and LIDAR data acquired from an airborne multi-sensor system. The proposed method mainly includes registration primitives extraction, correspondence establishment, and EOP(Exterior Orientation Parameters) adjustment. As the registration primitives, we extracts planar patches and intersection edges from the LIDAR data and object points and linking edges from the aerial images. The extracted primitives are then categorized into horizontal and vertical ones; and their correspondences are established. These correspondent pairs are incorporated as stochastic constraints into the bundle block adjustment, which finally precisely adjusts the exterior orientation parameters of the images. According to the experimental results from the application of the proposed method to real data, we found that the attitude parameters of EOPs were meaningfully adjusted and the geometric inconsistency of the primitives used for the adjustment is reduced from 2 m to 2 cm before and after the registration. Hence, the results of this research can contribute to data fusion for the high quality 3D spatial information.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.163-169
• /
• 2016

In this paper, we miniaturized the loop and coil in magnetic resonance wireless power transfer(MR-WPT) system for application to the small mobile device. The proposed disk type double coil resonator was designed to cause resonance at 6.87 MHz. It is composed of thin copper on both-side of acrylic substrate structured 2 mm width, 1 mm pitch and 8 turns. The outer radius of spiral coil pattern is 9 cm. And the proposed loop was made of the copper wire 5 mm diameter of cross-section. The size of loop is 10 cm diameter. For resonance at 6.87 MHz, the capacitor with 3,300 pF was connected in series on the loop. We rearranged the resonators and organized several WPT systems which is rearranged by resonators. The highest transfer efficiency of miniaturized WPT system was 35.67 %. This proposed design of spiral double coil will contribute to make resonator smaller for appling small and thin mobile device.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.3
• /
• pp.96-102
• /
• 2020

In this paper, AlN epilayers on 6H-SiC (0001) substrate are grown by mixed source hydride vapor phase epitaxy (MS-HVPE). AlN epilayer of 0.5 ㎛ thickness was obtained with a growth rate of 5 nm per hour. The surface of AlN epilayer grown on 6H-SiC (0001) substrate was investigated by field emission scanning electron microscopy (FE-SEM) and energy dispersive X-ray spectroscopy (EDS). Dislocation density was considered through HR-XRD and related calculations. A fine crystalline AlN epilayer with screw dislocation density of 1.4 × 10⁹ cm^-2 and edge dislocation density of 3.8 × 10⁹ cm^-2 was confirmed. The AlN epilayer on 6H-SiC (0001) substrate grown by using the mixed source HVPE method could be applied to power devices.

• Journal of the Korean Magnetics Society
• /
• v.26 no.5
• /
• pp.173-178
• /
• 2016

This study is to evaluate the effect of a Contrast Media (CM) on dose calculations and clinical significance in Radiation (Electromagnetic wave) Therapy (RT) plans for head & neck (H&N) and prostate cancer. Pinnacle 8.0 system was used to measure the change of Electron Density (ED) of the tissue for CM. To determine the effect of dose calculation due to CM, we did the RT planning for 30 patients. To compare the ED and dose calculations of RT plans, 3D CRT and IMRT plans were do with pinnacle and Tomotherapy planning system. Mean difference of ED between enhanced and unenhanced CT was less than 4%: H&N Target Volume (TV) 2.1%, parotid 1.9%, SMG 3.6%, tongue 0.9%, spinal cord 0.3%, esophagus 2.6%, mandible 0.1% and prostate TV 0.7%, lymph node 1.1%, bladder 1.2%, rectum 1.5%, small bowel 1.2%, colon 0.6%, penile bulb 0.8%, femoral head -0.2%. The dose difference between RT plan using CM and without CM showed an increase of dose in TV. The rate of increase was less than 2.5% (3D CRT: H&N 0.69~2.51%, prostate 0.04~1.14%, IMRT: H&N 0.58~1.31%, prostate 0.36~1.04%). RT plans using a CM has the insignificant effect on the organs and TV, so this error is allowable clinically. However, the much more accurate plan is possible as to image fusion (CM and without CM images) to ROI contour and when dose calculation, use the without CM image. Using the fusion of 'ROI import' perform calculations on without CM, it will be able to reduce the error (1~3%) caused by the CM.

• Korean Journal of Animal Reproduction
• /
• v.18 no.2
• /
• pp.113-119
• /
• 1994

To improve nuclear transplantation(NT) efficiency and to produce a large scale genetically identical cloned calves, examined the in vitro development capacity after co-culture of bovine oviductal epithelial cells (BOEC) and granulosa cells in TCM-199 supplemented with 10% fetal calf serum (FCS) with early bovine embryos derived from in vitro matured fertilized(IVM-IVF) oocyte. In addition, the age dependence of IVM oocyte on electro-stimulation and the effective electric voltage on in ivtro development of bovine NT embryos were examined. The results obtained were summerized as follows; 1. The cleavage rates of IVM-IVF bovine embryos in co-culture with bovine oviductal epithelial cells and granulosa cells were not significantly different(P<0.05), but the developmental rate into morula and blastocyst stage were different showing 38.3 and 20.2%, respectively. 2. The activation (82.5%) and development in vitro(8.6%) into later embryo stages of the aging oocytes of 32 hours post-maturation (hpm) were significantly higher than those of 24 hpm at direct current (DC) voltage of 1.5kV/cm, 60$\mu$sec pulse duration and 1 pulse time. 3. The fusion rates of NT eggs of 32 hpm following to different DC voltages from range 0.75 to 1.5kV/cm were not differ, but the developmental rate into morula and blastocyst stages at DC voltages of 0.75 and 1.0kV/cm were higher(11.4 and 12.6%, respectively) than those of 1.5kV/cm(0%). From these results, it can be suggested the optimal culture system for in vitro culture of IVM-IVF bovine embryos is a co-culture system with BOEC in TCM-199 supplemented 10% FCS. The effective time and the DC voltage for activation, electrofusion and in vitro development of NT embryos derived from IVM-IVF bovine embryo are 32hpm and 0.75~1.0kV/cm. But to improve NT efficiency, the advanced research (cell cycle synchronization, micromanipulation, culture system, etc.) is needed.