• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.550-558
• /
• 1998

The experiment was conducted to evaluate CM (Cell Mass from Lysine Fermentation), which is used to produce synthetic lysine in industry, as an alternative protein source in broiler diets. Three different production conditions were employed to produce CMs (CM I, II, III). Treatments were control, CM I -1 (1 % of CM in the diet), CM I -3 (3% of CM in the diet), CM I -5 (5% of CM in the diet), CM II (3% of CM in the diet), and CM III (3% of CM in the diet). It was found that CM products were all high in crude protein content and especially high in lysine and methionine contents, while very low in minerals. For the starter period, all CM groups showed better weight gain, chicks fed CM I -1 diets were especially high in weight gain (p < 0.05). CM groups consumed 14.4 to 18.0% more feed than chicks fed control diets (p < 0.05). The best FCR was found in CM I -1 groups (p < 0.05), but as CM level was increased, FCR was also increased. For the finisher period, weight gain was similar through all treatments. Through whole experimental period, weight gain and feed intake were higher in all CM groups than control group (p < 0.05), however, as CM level was increased, FCR was also increased. Generally chicks fed CM diets showed higher utilizabilities of gross energy, dry matter, crude protein and crude fat. The best nutrients utilizability was obtained in CM I -1 group, and the worst was found in the control group. During the finisher period, the utilizabilities of crude protein, crude ash and phosphorus were not affected by the dietary treatments. Amino acids utilizability was not significantly affected by the treatments except CM I -5 group. In all amino acids tested, chicks did not show the big difference in utilizabilities. Only in the CM I -5 group, amino acids utilizability was significantly lower than control group. However, among CM I groups, the mean value of the amino acids utilizability was decreased as the level of CM inclusion in the diet was increased. During the finisher period, similar trend was found in amino acids utilizability.

• Fashion & Textile Research Journal
• /
• v.7 no.4
• /
• pp.407-412
• /
• 2005

This study is to establish the pattern for one piece dress which fits well to the women somatotype with different drop value and is functional and has high body fitness. Selected 2 testers from classified 4 types who were close to the average value and took twice dressing test. After successive correction and revision, patterns of one piece dress for each somatotype were established. M type ; Bust line is established to B/4+1.7 cm. Waist line is W/4+1.5+2.5 cm(dart amount) for front pattern and W/4+0.8+2 cm(dart amount) for back. Hip line is H/4+0.8 cm for front and H/4+0.8 cm for back and the bust dart amount is 2.5 cm. A type ; Bust line is established to B/4+1.7 cm. Waist line is W/4+1.5+2.5 cm (dart amount) for front pattern and W/4+0.8+2 cm(dart amount) for back. Hip line is H/4+1.5 cm for front and H/4+1 cm for back and the bust dart amount is 2.2 cm. X type ; Bust line is established to B/4+1.5 cm for front pattern and B/4+2 cm for back. Waist line is W/4+2+2.5 cm (dart amount) for front and W/4+1+2+1.4 cm(for two darts amount) for back. Hip line is H/4+1 cm for front and H/4+1.3cm for back and the bust dart amount is 2.8 cm. H type; Bust line is established to B/4+1.5 cm for front pattern and B/4+2cm for back. Waist line is W/4+1.7+2.5 cm (dart amount) for front and W/4+0.8+2 cm(dart amount) for back. Hip line is H/4+2 cm for front and H/4+1.5 cm for back and the bust dart amount is 2.8 cm. In order to achieve the objective evaluation on a new pattern in this study, the sensory evaluation for both Imwonja pattern and a new pattern in this study was completed. As a result of sensory evaluation, a new pattern of this study could accomplished a good appearance in reflecting characteristics of each types and could achieved the functional superiority than comparison pattern.

• Journal of The Geomorphological Association of Korea
• /
• v.18 no.4
• /
• pp.141-152
• /
• 2011

The fluctuation of inundation height due to climate change and sea level rise is expected to cause the socio-economical damage in the coastal zone. To evaluate the inundation damage in Haeundae Beach Area, the inundation height was calculated using the observed data and the range of inundated area and buildings was estimated by applying to DEM data, which was constructed with airborne LiDAR data. The range of inundated area and buildings were estimated with 5 scenario of sea level rise in the condition of minimum and maximum inundation height. When the 181cm, the area of 7.19ha and 5 buildings were expected to be inundated. As 20cm in sea level rises at the minimum of the inundation height, the area of 8.90ha and 8buildings were expected to be inundated. As 30cm, 40cm, 50cm, 60cm in sea level rise, 9.98ha and 9 buildings, 11.11ha and 11buildings, 12.41ha and 11buildings, 14.18ha and 14buildings were expected to be inundated, respectively. When the 526 cm, the area of 32.35ha and 42buildings were expected to be inundated. As 20cm, 30cm, 40cm, 50cm, 60cm in sea level rise at the maximum of the inundation height, 38.94ha and 47buildings, 42.46ha and 52buildings, 45.76ha and 58buildings, 49.51ha and 66buildings, 52.53ha and 72buildings were expected to be inundated, respectively. The leisure and industry facilities, socio-economical installation, habitation are located near by the estimated inundation area, then the inundation damage is expected to be greater scale.

• Korean Journal of Environmental Agriculture
• /
• v.17 no.1
• /
• pp.48-53
• /
• 1998

The purpose of this study was to compare heavy metal concentrations in uncontaminated soil with those in soil influenced by industrial activities, and to investigate the relationship between change of heavy metal content and the kind of industry at the Iksan 1st Industrial Complex that has started since 1975. Soils sampled in 0-3㎝ and 3-6㎝ soil depth, respectively were analized for content of Cd, Cu, Ni, Pb and Zn. Change of heavy metal content in soil of the industrial complex were more accumulated 16 to 25% of Cd and Cu, 93% of Pb and Zn, respectively in samples compared with natural soil uncontaminated. But there was no different in Ni content between two soil. Distribution of Cd in soil layer of 0 to 3cm was the highest concentration of 5 ppm more at the textile industries, and then higher at the chemicals and the food processing industries. In 3 to 6㎝ soil layer Cd content was the highest concentration of 5 ppm more at the metal processing industries, and then higher at the textile industries. Cd accumulation in soil was different according to a kind of industry and soil depth. Cu content was the highest value of 400 ppm more in soil layer of 0 to 3cm at the manufacturing electric wires industry area and showed the accumulation phenomenon in soil layer 3 to 6cm at the ohmmeter, machines and electric wires industry area. Ni content was 35 ppm more in soil of the metal plating and processing industries regardless of soil sampling layer. Then it was 25 ppm more in soil of the building stones and semiconductor industries. Pb content was from 400 to 1000 ppm in soil of the chemicals and textiles industries regardless of soil sampling layer. Zn content was 1200 ppm more in soil of the chemicals and silk fabrics industries regardless of soil depth, and then lower in order to soil of leather processing${\le}$metal plating industries. In conclusion, changes of heavy metal kinds and content in soil of this industrial complex area were caused by the type or kinds of industrial activities. Changes of Pb and Zn content in soil were dominated at this area.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.404-407
• /
• 2004

This Research suggested direction of development and analyzed necessity and given condition of CM(Construction Management) operation system of SOC private infrastructure project which is judged to grow up continuously from now on, Direction of development which is suggested in this research is largely there, (1)development of SOC private infrastructure project CM work standard process guide, (2)development of SOC Private Investment project feasibility study Performance standard, (3)checklist of SOC by stages and functionally private investment projects risk. Through this development, later we judge effect not only supply of a model case to artivate CM system but heightening of efficiency in domestic construction industry.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.6
• /
• pp.74-80
• /
• 2019

In domestic construction industry, CM companies perform overall project management tasks such as planning, designing, construction management, evaluation, maintenance for construction projects. However, even with these tasks, as competition becomes more fierce and probability dependence is high, lots of CM companies are experiencing difficulties of securing and preparing indicators for order competence reinforcement. This study examines domestic business condition and task analysis. Also Competence factors are derived through institutional and legal investigation, and review of existing literature. The derived competence factors are focused on practical factors by interviewing with experts. competence factors for each type were classified into BSC's four perspectives(Finance / Customers / Internal processes / Learning and Growth) and surveyed. Based on the results of the survey, the priorities of competence factors that companies should focus on were derived. The purpose of this study is to contribute on making an indicator that can be utilized on business activities through priority analysis of competence factors for order competitiveness reinforcement of CM companies.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.5
• /
• pp.56-64
• /
• 2022

Although pilot projects have been actively carried out from 2017 to present to institutionalize CM at Risk, one of the major tasks for innovation in the construction industry, standards and processes related to Design VE, a key tool for determining GMP in the pre-construction phase, have not yet been established. Therefore, through research and operation status related to CM at Risk and Design VE, and survey on project participants' perception, the problem of the existing design VE process was derived, and the design VE process suitable for the CM at Risk project was proposed. The application plan was proposed in three aspects: Schedule, Cycle, and Process, and the appropriateness and applicability were verified through FGI. The results of this study are expected to be used as basic data on the establishment and legislation of order standards to be made in the future.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.289-294
• /
• 2007

It has been 10 years Since December 1996 when CM method was institutionalized by Construction Industry Fundamental law. Even though construction market has been in stagnant of business activities till now, CM in Korea started to be activated by the introduction of CM method i.n public construction. In the end of 2005, the number of CM order's contract is 6.7 times , an amount of CM order's money is 9.2 times more than operation plan of CM system announced in 2001. Therefore, CM market has been dramatically growing. However, it is judged that the shortage of faith in CM project and necessity of CM method are not recognized and study on a owner who affects successful settlement of CM has not been performed. When considering those points, in introduction and practical use of CM, CM is suggested to the field which is necessary for a client through the task performance level research and analysis of a owner who act a important role to activate Construction Management. As result of studying pre-existing papers to i.nvestigate of owner's capability level, the task function of a client is classified into 10 types and a public opinion poll was performed based on the 10 types of function.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.48 no.6
• /
• pp.982-987
• /
• 2015

During the study period, a total of 158 individuals of Synechogobius hasta were collected. The range of body length (BL) was 15.4-44.5 cm. The stomachs of 26.6% of the individuals were empty. The most abundant prey was shrimp. Among shrimp, Exopalaemon orientis was the most abundant species, being present in 27% in %IRI (index of relative importance). Fishes and crabs were also abundant prey. Analysis of ontogenetic changes, suggested that shrimp were the main prey of S. hasta of two size classes (<20 and 20-25 cm). The proportion of shrimp decreased, but that of fishes and crabs increased, with increasing body length, beginning at the 25-30 cm size class. In spring, fishes were the dominant prey, while shrimps, and crabs and fishes dominated in autumn and winter, respectively.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.1
• /
• pp.207-215
• /
• 2019

This study examines the effect of the height of cane that hemiplegic patients due to stroke use on their plantar pressure in standing position, gait speed. The study suggests a new standard for appropriate cane height that considers the change of average height of population. Research subjects included 12 patients hospitalized in S Medical Care Hospital located in Gwangju Metropolitan City in South Korea who were diagnosed with stroke. Group A uses a cane of the height of the greater trochanter of femur, group B uses a cane of 5cm above the height of the greater trochanter of femur, and group C is a cane of 10cm above the height of the greater trochanter of femur. In the study result, non-affected side plantar pressure and affected side plantar pressure showed a significant difference among the cases where the cane height was the same as the A group, B group, C group. In the post-hoc analysis result, a significant difference was observed between the case of A group and C group. Gait speed showed no significant difference among the case of the A group, B group, C group. The asymmetry of the stroke affects not only the posture but also the walking that is related to daily life. Changes in the height of the cane did not affect walking speed. The change in the height of the cane showed a change in the weight support ratio, which is thought to have a positive effect on the asymmetry. In future clinical setting, this study result will be able to provide fundamental data regarding the cane height in the standing or walking therapy for hemiplegic patients due to stroke with cane application.