• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.403-406
• /
• 2007

A New S-PVA which is named as charge-shared super PVA (CS S-PVA) LCD mode is proposed. CS SPVA controls the voltage ratio of low pixel by sharing system between low pixel and control cap, resulting in improved off-axis image quality and transmittance increase without any side effects. Moreover, the new S-PVA LCD mode is free of image-sticking. Operating schemes and display performance of CS S-PVA are presented.

• Journal of the Korean Institute of Educational Facilities
• /
• v.21 no.6
• /
• pp.33-42
• /
• 2014

The objective of this study is to investigate learning factors (stability, attention and activation) in school by electroencephalogram (theta, alpha and beta waves) analysis during relaxed or concentrated. In order to measure electroencephalograms, MP 150 by Biopac and ECI Electro-Cap are employed. Three types of color temperatures (3000K, 5000K, 7000K) are used and 13 undergraduate and 12 graduate students are selected as experimental subjects. When subjects are relaxed during contemplation or concentrated during mental arithmetic, we compare with stability, attention and activation indices. The test results show that subjects were stable when color temperature is 5000K. Subjects gave best attention when color temperature is 7000K. Subjects activated well when color temperature is 3000K during relaxed attention. However, subjects activated rigorous when color temperature is 7000K during constrained attention.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.130-131
• /
• 2017

기존 이동 트레이의 경우 모터를 구동하기 위해 외부 전원장치가 필요하고 지속적인 유지보수가 필요한 문제점이 있다. 이를 해결하기 위해 외부 전원 장치가 아닌 발전기 바퀴를 통해 배터리를 충전하여 3배 이상 승압 가능한 Boost Converter로 모터를 구동한다. 하지만 모터 기동 시 필요한 순간적인 큰 전류를 배터리에서 공급하기 때문에 배터리의 수명이 감소되는 문제점이 있다. 본 논문에서는 3배 이상 승압이 가능하면서 배터리 부담을 줄이는 Super Cap. String을 사용하여 순간적으로 필요한 큰 전류를 공급하는 Boost Converter를 제안한다. 이를 이론적, 실험적 분석을 통해 그 타당성을 검증한다.

• Journal of Sensor Science and Technology
• /
• v.15 no.4
• /
• pp.245-250
• /
• 2006

In this paper, glass cap wafer for MEMS device package is fabricated by using sand blaster dry etcher and Its surface is studied. The surface of dry etched glass is analyzed by using SEM, and many glass particles and micro cracks are observed. If these kind of particles were dropped from glass to the surface of device, It would make critical failure to the operation of device. So, several cleaning and etching methods are induced to remove these kinds of dormant failure mode and optimized condition is found out.

• Journal of Korea Foundry Society
• /
• v.3 no.2
• /
• pp.83-91
• /
• 1983

In this paper analytical and numerical methods fur analysis of solidification of castings are described, and the matrix method, one of numerical method, where the nodal point is designated on the element boundary was adapted. The cooling curve obtained by experimental values, when cast steel (0.29%C. 0.62%Si) was poured into $CO_2$ mold, is compared with that of computed values by exploiting computer (V77-600 Data Proceeding System, UNIVAC). The computed value is nearly approximation to the experimental. But the computed value shows a tendency that is a little higher than the experimental in solid-liquid coexisting temperature ranges and much lower than the experimental after solidification. It is considered to result from the lacks and difficulties of ultimately appropriate adaptation of various physical properties and also air cap between castings and mold.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1637-1639
• /
• 2005

The measurement of magnetic field is performed about DC and AC magnetic field in test track of depot. The test point is cap, on the converter/inverter box, on the traction motor, on the APSE and on the line filter, the height of measurement is bottom and 50 cm height. In case of AC magnetic field, the selected specific frequency is measured on the converter/inverter box. The AC magnetic field is checked and analysis through RS-232C and notebook PC. The DC magnetic field is measured by using the Hall Probe, test result is saved and analysis by PXI system. On the line filter, the maximum value is 1.4 mT in case of DC magnetic field and 0.044 mT in case of AC magnetic field at 50 Hz.

• Journal of the Korean Mathematical Society
• /
• v.44 no.4
• /
• pp.863-872
• /
• 2007

Let D be an integral domain with quotient field K, A a nonempty set of height-one maximal t-ideals of D, F$({\Lambda})={I{\subseteq}D|I$ is an ideal of D such that $I{\subseteq}P$ for all $P{\in}A}$, and $D_F({\Lambda})={x{\in}K|xA{\subseteq}D$ for some $A{\in}F({\Lambda})}$. In this paper, we prove that if each $P{\in}A$ is the radical of a finite type v-ideal (resp., a principal ideal), then $D_{F({\Lambda})}$ is a weakly Krull domain (resp., generalized weakly factorial domain) if and only if the intersection $D_{F({\Lambda})}={\cap}_{P{\in}A}D_P$ has finite character, if and only if $F({\Lambda})$ is a t-splitting set of ideals, if and only if $F({\Lambda})$ is v-finite.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.334-336
• /
• 2021

허가형 블록체인 기반 데이터 공유 시스템은 분산 환경에서 신뢰 수준을 구축하고 일관된 메시지를 기록 및 공유함으로써 서비스의 상호 운용성을 가능하게 한다. 그러나 허가형 블록체인은 종종 탈중앙화, 보안 및 상호 운용성과 충돌한다. 이는 중앙 집중식 시스템으로 돌아가거나 데이터의 독점 및 남용 및 오용으로 이어질 수 있다. 따라서 CAP (Consistency, Availability, Partition tolerance)에 이론 검증에 따라 메시지 공유, 비잔틴 내결함성 및 메시지 일관성을 고려하고 적용해야 한다. 기존의 PBFT(Practical Byzantine Fault Tolerance) 합의 알고리즘는 노드의 증가시, 장애내성을 갖기위해 계산되어야 할 합의 처리시간이 증가하며, DPOS(Delegated Proof of Stake) 알고리즘은 보상, 리더 선출의 공정성 문제 등에 따라 허가형 블록체인에서의 적합한 방식이 연구되고 있다. 본 논문에서는 서비스의 상호 운용성과 과제에 대해 논의하고 허가된 블록체인의 합의 개선을 통한 데이터 공유 시스템을 제안한다.

• Journal of Embryo Transfer
• /
• v.25 no.4
• /
• pp.259-262
• /
• 2010

Optimization of the preimplantation mammalian embryo culture condition was widely focused on refining medium composition under the name of chemically defined media. However, recent research revealed that the alteration of physical environment can be a crucial factor to a successful embryo development. In this study, under the same embryo density, a novel culture device named oil-free micro tube culture (MTC) system was evaluated using porcine parthenogenetic embryos. The activated oocytes were placed into the 0.2 ml thin-wall flat cap PCR tube and cultured to the blastocyst stage. As a preliminary step, embryo density and culture medium volume were optimized under a standard drop culture system. The optimal embryo density range for in vitro culture was 0.5 embryos per ${\mu}l$ in $20\;{\mu}l$ drop (20.5%) and 1.0 embryos per ${\mu}l$ in $10\;{\mu}l$ drop (20.6%). Based on these results, we compared drop culture system and 'MTC' system in terms of the developmental rate to the blastocyst stage. In $20\;{\mu}l$ medium volume, the 'MTC' system showed similar blastocyst formation rate when compared with drop culture system (20.2% versus 20.5%, respectively) while the 'MTC' system showed lower blastocyst formation rate than drop culture system in $10\;{\mu}l$ one (12.7% versus 20.0%, respectively). Therefore the $20\;{\mu}l$ MTC system may be an alternative incubation system for short-distance embryo transport without carrying the $CO_2$ incubator and this provides novel embryo culture device to clinical veterinary embryologists.

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.19-24
• /
• 1998

The main goal of this paper is to propose and to test a radio protocol based CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) for the purpose of enhancing the existing medical information system. The feature of the new medical information system, Medical Application Radio System(MARS), which operating in real time is the transmission of medical information in bi-direction between the hospital control office and patients mobile stations. MARS monitors patients linked to the network by radio and provides quick alarm, flexible documentation capabilities, asnd fast treatment for the analysis of collected medical data. The existing medical information system, radio telemetry system which transfers the message of patients to the CAP(Central Access Point) unit in one way at the speed of 9.6Kbps and operates a channel frequency bandwidth. To verify the Performance of the proposed system, we have performed the numerical analysis and have implemented a test system which consists of the 2.4Ghz radio transceiver and personal computer.