• International Journal of Vascular Biomedical Engineering
• /
• v.3 no.2
• /
• pp.10-16
• /
• 2005

Because patients with coronary artery disease (CAD) have depressed vagal modulation and the mortality risk from acute myocardial infarction is lower in patients with higher vagal modulation, methods that can increase vagal modulation are desirable in patients with CAD. We intended to inspect the effect of recumbent posture on vagal modulation. By using angiography, 33 patients with abnormal (CAD group) and 33 patients with normal coronary arteries (control group) were studied. The nonlinear as well as the linear characteristics of heart rate variability (HRV) were analyzed on these patients in three recumbent postures: namely, the supine, right lateral decubitus, and left lateral decubitus postures. The lower the normalized high-frequency power (nHF) in the supine or left lateral decubitus posture, the higher the increase in the nHF when the posture was changed from supine or left lateral decubitus to right lateral decubitus in both groups of patients. Right lateral decubitus posture can lead to the highest vagal modulation and the lowest sympathetic modulation among the three recumbent postures in both normal and patients with CAD. Therefore, the right lateral decubitus posture can be used as an effective physiologic vagal enhancer in patients with CAD.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.401-408
• /
• 2003

A CAD program for metal bellows diaphragm was developed in this study. This program was written in AutoLISP on the AutoCAD system with a personal computer. Basic design concept used in this program is composition of a convolution that is tangent to two lines and 5 circles from given design parameters(initial radius, inner and outer diameter, thickness, pitch, etc.). The effects of altering some design parameters on stress distribution and fatigue life of bellows were estimated using commercial FEM code, NISAII. As a result, the metal bellows diaphragm was successfully designed by the CAD program. It is used to model a bellows geometry in pre-processor of FEM code. The FEM result shows that stress is dependent on straight line length, bellows diameter with same span, and fatigue life is also affected by design parameters.

• International Journal of CAD/CAM
• /
• v.3 no.1_2
• /
• pp.97-109
• /
• 2003

A large scale polygon models are often used to approximately represent 3D CAD models in Digital Engineering environment such as DMU (Digital Mockups) and network based collaborative design. However, they are not suitable for distribution on the network and for interactive rendering. We introduce a new coding system based on subdivision schemes called S-CODE system. In this system, it is possible to highly compress the model with sufficient accuracy and to view the model efficiently in a level of detail (LOD) fashion. The method is based on subdivision surface fitting by which a subdivision surface and curves which approximate a face of a CAD model are generated. We also apply a subdivision method to analytic surfaces such as conical and cylindrical surfaces. A prototype system is developed and used for evaluation with reasonably complicated data. The results show that the method is useful as a CAD data coding system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.829-832
• /
• 2000

This paper describes a research work of developing a computer-aided design of product with bending and piercing for progressive working. An approach to the CAD system is based on the knowledge-based rules. Knowledge fur the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of three main modules, which are input and shape treatment, flat pattern layout and strip layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, bending sequence, and availability of press. Strip layout drawing automatically generated by piercing with punch profiles divided into for external area is simulated in 3-D graphic forms, including bending sequences for the product with piercing and bending. Results obtained using the modules enable the manufacturer of electronic products to be more efficient in this field.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.22 no.5
• /
• pp.223-226
• /
• 2012

There are many restrictions in conventional ways of Jewelry mass production which are Mokume Gane, Inlaid Technology based on a joining work of dissimilar metals. To overcome this, Multi-Casting using both Jewelry-Casting and CAD/CAM has presented. In experiment on Muti-Casting, second original sample which was produced by CAD/CAM is 5 % smaller than first one. The first and second castings are brass and silver, respectively. When making second sample, the temperature of flask was about $150{\sim}200^{\circ}C$ higher than the standard temperature of flask when making castings. Through the Multi-Casting, it was found that there was no trouble making dissimilar metals Jewelry which can be mass produced.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.174-182
• /
• 1999

This paper describes a research work of developing a computer-aided design of product with bending constraints and piercing for progressive working. an approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, production feasibility check, and strip-layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend, material and thickness of product, complexities of blank geometry and punch profile, bending sequence, availability of press. Strip layout drawing generated by piercing with punch profiles divide into automatically for external area is shown into graphic forms, including bending sequences for the product with piercing and bending constraints. Results obtained using the modules enable the designer and manufacturer of piercing and bending dies to be more efficient in this field.

• Fashion & Textile Research Journal
• /
• v.24 no.2
• /
• pp.241-248
• /
• 2022

This study aims to provide basic data to suggest guidelines for re-education and work improvement of modelists based on the analysis of the current status of modelist work and education. A survey was conducted from January 4 to May 15, 2020, targeting 44 people working in pattern, pattern CAD, and grading in domestic apparel companies. Descriptive statistical analysis and frequency analysis using SPSS 25 were employed to analyze the status of work type, work difficulties, and re-education. For pattern production, the rate of using pattern CAD for business was high. It was found that companies mainly use YUKA CAD (63.8%), and branded companies use pattern CAD (100%). It was found that 3D CAD is mostly employed by vendors (88.9%), and CLO (90%) is mainly used. Regarding difficulties in pattern making, it was found that they experienced difficulties with stretchable materials owing to the amount of shrinkage and sagging of the fabric. The work problem was the lack of requisite working hours owing to the volume of work. Regarding future re-education, 63.6% of the total respondents indicated that they required a course related to pattern correction and material. Moreover, it was found that re-education was necessary to upgrade technology and acquire new knowledge, however, information on re-education was insufficient.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.3
• /
• pp.233-239
• /
• 2015

PURPOSE. This study aimed to evaluate the fit of zirconia ceramics before and after veneering, using 3 different veneering processes (layering, press-over, and CAD-on techniques). MATERIALS AND METHODS. Thirty standardized zirconia CAD/CAM frameworks were constructed and divided into three groups of 10 each. The first group was veneered using the traditional layering technique. Press-over and CAD-on techniques were used to veneer second and third groups. The marginal gap of specimens was measured before and after veneering process at 18 sites on the master die using a digital microscope. Paired t-test was used to evaluate mean marginal gap changes. One-way ANOVA and post hoc tests were also employed for comparison among 3 groups (${\alpha}$=.05). RESULTS. Marginal gap of 3 groups was increased after porcelain veneering. The mean marginal gap values after veneering in the layering group ($63.06{\mu}m$) was higher than press-over ($50.64{\mu}m$) and CAD-on ($51.50{\mu}m$) veneered groups (P<.001). CONCLUSION. Three veneering methods altered the marginal fit of zirconia copings. Conventional layering technique increased the marginal gap of zirconia framework more than pressing and CADon techniques. All ceramic crowns made through three different veneering methods revealed clinically acceptable marginal fit.

• Korean Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.133-149
• /
• 1996

In order to reduce the trial-and-errors in design and production of injection molded plastic parts, there has been much research effort not only on CAE systems which simulate the injection molding process, but also on CAD systems which support initial design and re-design of plastic parts and their molds. The CAD systems and CAE systems have been developed independently with being built on different basis. That is, CAD systems manipulate the part shapes and the design features in a complete solid model, while CAE systems work on shell meshes generated on the abstract sheet model or medial surface of the part. Therefore, it is required to support the two types of geometric models and feature information in one environment to integrate CAD and CAE systems for accelerating the design speed. A feature-based non-manifold geometric modeling system has been developed to provide an integrated environment for design and analysis of injection molding products. In this system, the geometric models for CAD and CAE systems are represented by a non-manifold boundary representation and they are merged into a single geometric model. The suitable form of geometric model for any application can be extracted from this model. In addition, the feature deletion and interaction problem of the feature-based design system has been solved clearly by introducing the non-manifold Boolean operation based on 'merge and selection' algorithm. The sheet modeling capabilities were also developed for easy modeling of thin plastic parts.

• Development and Reproduction
• /
• v.8 no.1
• /
• pp.27-33
• /
• 2004

To investigate the mechanism of germ cell death in postnatal stage of mouse, the involvement of apoptotic executioners, caspase-3 and caspase-activated DNase(CAD), and apoptotic initiators, Bax Fas and Fas ligand, in the germ cell death has been studied. Immune-labels of active caspase-3 and CAD were located in TUNEL-positive, apoptotic, oocytes as well as normal oocytes of primary or secondary follicles. CAD immune-labels were also detected in the nucleus of TUNEL-positive oocytes. Most of oocytes showing positive immune-labeling of active caspase-3 or CAD had vacuoles in their cytoplasm, which is the morphological characteristic of oocyte during folliclar atresia. Bax immune-stains were detected in the atretic oocytes which showed the vacuole in their cytoplasm. Positive immune-labels for Fas ligand was localized in TUNEL-positive or atretic oocytes. Presence of immunoreactivity of active caspase-3 and CAD in TUNEL-positive germ cells implicate that active raspase-3 and CAD might play a role in germ cell apoptosis during early development of mouse ovarian follicle. Immunohistochemical localization of Bax and Fas ligand in TUNEL-positive oocytes suggests that these might be the most plausible modulator of oocyte apoptosis.