• Clean Technology
• /
• v.17 no.2
• /
• pp.134-141
• /
• 2011

The effects of the compounds and concentrations of nitrogenous electron acceptor, the ratio of electron donor/electron acceptor (C/N), and the complexity of electron donor on the emission of $N_2O$ during wastewater denitrification were quantitatively investigated in this study. The higher ${NO_3}^-$ and ${NO_2}^-$ concentrations, the more $N_2O$ emission was observed. ${NO_2}^-$ has strong effect on $N_2O$ emission as it emitted morc $N_2O$ than ${NO_3}^-$, 50 mg/L of ${NO_2}^-$-N gave the highest conversion (9.3%) and yield (9.8%) of $N_2O$ while ${NO_3}^-$-N (50 mg/L) gave 5.6% conversion and 11.0% yield. Lower C/N ratio decreases nitrogen removal efficiency, but it increases the conversion of $N_2O$ because of the incomplete denitrification by the limited organic carbon. When real domestic wastewater is used as the electron donor of the denitrification, $N_2O$ emission is reduced to 1/10 of the emission when single carbon (acetate) is used. It is thought that multiple carbon source utilizes many denitrification pathways and it seems to be helpful for the reduction of $N_2O$ emission.

• KSBB Journal
• /
• v.20 no.4
• /
• pp.266-270
• /
• 2005

The effect of the weight ratio of carbon source to nitrogen source on the growth and the composition change of fatty acids of Thraustochytrium aureum ATCC 34304 was investigated. The cell concentration of 5 days' culture increased and then decreased according to the increase of C/N, The ratioes for the maximum biomass were unique respectively and distributed between 1 and 4 with the initial sugar concentration in the range of 5 g/L to 25 g/L. The biomass yield, $Y_{x/s}$ decreased along with the increase of C/N, but maintained a constant value 0.35 between 10 and 20. The composition of myristic acid $(C_{14:0})$, one component of the lipid synthesized by T. aureum, was not affected with the change of C/N, but the composition of palmitic acid $(C_{16:0})$ was around $20\%$ below 4 of C/N and decreased to $15\%$ according to C/N about 4. The compositions of oleic acid $(C_{18:1})$ and linoleic acid $(C_{18:2})$ increased from 0 to $20\%\;and\;7\%$ respectively. The composition of $\gamma-linoleic$ acid $(C_{18:3})$, however, reduced from $5\%\;to\;2\%$. EPA $(C_{20:5})$ and DPA $(C_{22:5})$ showed a tendency of reduction in the weight composition according to the increase of C/N, but DHA $(C_{22:6})$ had a trend maintaining an approximately constant value, around $40\%$, irrespective of the change of C/N.

• Korean Chemical Engineering Research
• /
• v.51 no.6
• /
• pp.677-684
• /
• 2013

A mixed refrigerant cycle (MRC) has been widely used in liquefaction of natural gas because it is simple and easily operable with reasonable equipment costs. One of the important techniques in MRC is selection of a refrigerant mixture and decision of its optimum mixing ratio. In this work, it is examined whether mixture components (refrigerants) and their mixing ratio influence performance of general MRC processes. In doing this, mixture design and response surface method, which are well-known statistical techniques, are used to find optimal mixture refrigerants and their optimal mixing ratio that minimize total energy consumption of the entire liquefaction process. A MRC process using several refrigerants and various mixing ratios is simulated by Aspen HYSYS and mixture design and response surface method are implemented using Minitab. According to the results, methane ($C_1$), ethane ($C_2$), propane ($C_3$) and nitrogen ($N_2$) are selected as best mixture refrigerants and the determined mixture ratio (mole ration) can reduce total energy consumption by up to 50%.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.320-325
• /
• 2001

In this study, CT specimen were prepared from Pressure Vessel Steel which was used for pressure vessel plates for room and low temperature service. And we got the following characteristics from fatigue crack growth test carried out in the environment of room and low temperature at $25^{\circ}C$, -3$0^{\circ}C$, -6$0^{\circ}C$, -8$0^{\circ}C$, -10$0^{\circ}C$ and -12$0^{\circ}C$ and in the range of stress ratio of 0.05 and 0.3 by means of opening mode displacement. At the constant street ratio, the threshold stress intensity factor range ΔK$_{th}$ in the early stage of fatigue crack growth(Region I) and stress intensity factor range ΔK in the stable of fatigue crack growth(Region II) was increased in proportion to descend temperature. It assumed that the fatigue resistance characteristics and fracture strength at low temperature is considerable higher than that of room temperature in the early stage and stable of fatigue crack growth region. The straight line slope relation of logarithm do/dN -ΔK in RegionII, that is, the fatigue crack growth exponent m increased with descending temperature at the constant stress ratio. It was assumed that the fatigue crack growth rate do/dN is rapid in proportion to descending temperature in Region IIand the cryogenic-brittleness greatly affect a material with decreasing temperature.e.greatly affect a material with decreasing temperature.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.377-386
• /
• 1996

Austenitic stainless steel type 304L has been nitrided under the low pressure of high nitrogen environment for 5 hours by the square-wave-pulse-d.c. plasma as a function of temperature 400~$600^{\circ}C$ and of pulsation. At the temperature range lower than $500^{\circ}C$ and at the relatively high ratio of pulse duration to pulse period, nonstoichiometric stainless steel nitride has been developed in the form of a thin layer which has many cracks. At the temperature range higher than $500^{\circ}C$, with the increasing temperature or with the increasing ratio of the pulse duration to pulse period up to 50s/100s, the nitrided layer was composed mainly of CrN and Fe4N phases and became thick, uniform, columnar and nearly crack-free. The nitrided layer at $500^{\circ}C$ was mixed with the low-temperature layer and the high temperature layer and was very brittle.

• Journal of Korean Society of Forest Science
• /
• v.113 no.1
• /
• pp.66-72
• /
• 2024

Determining the nutrient stoichiometry in plant organs is critical for understanding nutrient uptake and cycling in forest ecosystems. This study evaluated nutrient concentrations and stoichiometry in various plant organs (stem, bark, branches, and foliage) of species found in four warm-temperate forests in southern Korea. Cryptomeria japonica D. Don (CJ), Quercus serrata Thunb. (QS), evergreen broadleaved tree species (EB), and bamboo spp. (BB) were destructively sampled to measure nutrient (C, N, and P) concentrations in the plant organs. The mean C concentration in the stem was significantly higher in CJ than in QS, BB, or EB, whereas the C concentration in the foliage was the lowest in BB. The mean foliar N and P concentrations were higher in BB than in EB or CJ. The mean stem C:N and C:P ratios were highest in CJ but were lowest in the foliage of BB. Overall, stems of all species showed a strong positive correlation between C concentration and dry weight, but a negative correlation between N and dry weight. The N and P concentrations of foliage and bark were strongly correlated, whereas those of the stem and branches were poorly correlated. Positive correlations were detected between the C:N and C:P ratios in bark and foliage. These results indicate the existence of intraspecific differences in nutrient requirements in warm-temperate forest species and add to the understanding of nutrient uptake and storage patterns in the organs of species growing in warm-temperate forests.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.07a
• /
• pp.554-557
• /
• 2001

In this work, we had synthesis the GaN powder by direct reaction between Ga and NH$_3$at the temperature range of 1000∼1150$^{\circ}C$, and investigated the reaction condition dependence of the GaN yield and some properties of GaN powder. The synthesized powder had Platelet and prismatic shape and showed hexagonal crystalline structure with the lattice constants of a= 3.1895 ${\AA}$, c= 5.18394 ${\AA}$, and the ratio of c/a = 1.6253. The GaN powder synthesis processes were examined based on the oxidation process of mater, and found as combined with mass transport process for the initial stage and diffusion-limited reaction for the extended reaction.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1991.05a
• /
• pp.73-74
• /
• 1991

The films with ferromagnetic fine particles dispersed in nonmagnetic matrix, such as $Fe-Al_2O_3$ and Fe-Cu have been studied for use of magnetic recording medium, optically device and sensor. Their magnetic properties depend strongly on structural parameter such as size and volume fraction of ferromagnetic particles. Fe-Cr-Ni alloy sputtered films also have microstructure with ferromagnetic -- b.c.c phase and nonmagnetic f.c.c phase grains. Magnetic properties of these films depend strongly on such a unique structure. These are depend on the ratio in volume of ferromagnetic particles to nonmagnetic ones $V_F/V_N$, the saturation magnetization Ms increased with increase of $V_F/V_N$. The coercivity Hc of the as-deposited films took maximum value of about 200 Oe at adequate $V_F/V_N$ and then Ms and Squareness S were 500 emu/cc and 0.5, respectively.(omitted)

• Membrane Journal
• /
• v.24 no.1
• /
• pp.20-30
• /
• 2014

A membrane-coupled sequencing batch reactor (MSBR) was used for the advanced treatment of rural village sewage which is very low C/N ratio. The effect of powdered activated carbon, aeration rate, and external organic material loadings on the treatment efficiency and filtration performance were investigated in sequencing batch reactor, in which a flat-sheet type microfiltration membrane with a pore size of $0.4{\mu}m$ was submerged. At the initial operation (within 54 days) MLSS concentration, and the removal efficiencies of COD, T-N, and T-P were increased with the increase of C/N ratio. After 89 days the removal efficiencies of COD, T-N, and T-P were 97.1%, 75.0%, and 48.3%, respectively. Suspended solid-free effluent was obtained by membrane filtration. The T-P removal was relatively low because of depending on the amount of excess sludge wasting. During the operation of MSBR with powdered activated carbon, the particle size of the sludge reduced by the increase of collision frequency and mixing intensity. In comparison with MSBR without powdered activated carbon, TMP of MSBR with that was significantly elevated.

• Journal of Surface Science and Engineering
• /
• v.54 no.3
• /
• pp.139-143
• /
• 2021

Cr-Al-N coatings were deposited onto WC-Co substrates using a cathodic arc evaporation (CAE) system. CAE technique is recognized to be a very useful process for hard coatings because it has many advantages such as high packing density and good adhesion to metallic substrates. In this study, the influence of deposition temperature as a key process parameter on film growth behavior and mechanical properties of Cr-Al-N coatings were systematically investigated and correlated with microstructural changes. From various analyses, the Cr-Al-N coatings prepared at deposition temperature of 450℃ in the CAE process showed excellent mechanical properties with higher deposition rate. The Cr-Al-N coatings with deposition temperature around 450℃ exhibited the highest hardness of about 35 GPa and elastic modulus of 442 GPa. The resistance to elastic strain to failure (H/E ratio) and the index of plastic deformation (H³/E² ratio) were also good values of 0.079 and 0.221 GPa, respectively, at the deposition temperature of 450℃. Based on the XRD, SEM and TEM analyses, the Cr-Al-N coatings exhibited a dense columnar structure with f.c.c. (Cr,Al)N multi-oriented phases in which crystallites showed irregular shapes (50~100nm in size) with many edge dislocations and lattice mismatches.