• 대한산업공학회지
• /
• 제12권1호
• /
• pp.31-41
• /
• 1986

In this paper, an integrated production inventory model is developed for two products on a single facility in which the raw materials are fed to the production system as required at the facility. The aim is to determine simultaneously the optimal production schedule for two products and the optimal procurement policies for the raw materials in a way that minimizes the total variable cost of the production system. The production schedule for the more frequently set-up product is formulated by the method of equal or unequal lot sizes. For the model developed, we present a computational scheme of finding the optimal policies and carry out sensitivity analysis through example problem.

• 한국주조공학회지
• /
• 제37권3호
• /
• pp.63-70
• /
• 2017

In the present study, effects of an addition of Sn on the microstructure and corrosion behavior were investigated in Mg-4%Zn-(0-3)%Sn casting alloys. With an increase in the Sn content, the ${\alpha}-(Mg)$ dendritic cell size was reduced, whereas the total amount of precipitates increased due to the formation of the $Mg_2Sn$ phase. It was found in immersion and electrochemical corrosion tests that the addition of Sn has a detrimental effect on the corrosion resistance of the Mg-4%Zn alloy. Microstructural examinations of the corrosion product and the corroded surface indicated that an accelerated micro-galvanic effect by the $Mg_2Sn-phase$ particles and a less protective corrosion product on the surface were responsible for the increased corrosion rate at a higher Sn content.

• 한국가구학회지
• /
• 제13권2호
• /
• pp.1-10
• /
• 2002

A computer top table was manufactured with the solid wood wastes that has been landfilled, combustion or burnt as a fuel at the present time. The computer table is different in form and size to that of existing fixed rectangular. It is idea1 product not only convenient and functional to use and beautiful design but also processing Performance of edge area and overlaying properties. The main technologies to develop this computer top table are plan for moulder to mould the Product and producing, molding the most suitable material and composition, suitable adhesives selecting and synthetic technology, investigation for the moulding conditions such as temperature, time etc, adequate overlaying materials selecting and overlaying technology have to be chocked.

• Fashion, Industry and Education
• /
• 제14권2호
• /
• pp.1-10
• /
• 2016

In the present study, the materials, sizes, and designs of blind eye patch products of skin-adhesive type and glass-attachment type currently available in the market will be analyzed and ergonomically appropriate blind eye patches will be developed. Although these skin-adhesive type eye patches were easy to use, they had shortcomings such as skin troubles due to the adhesive used on the weak and sensitive skin of children and the fact that eyebrows are pulled out and the skin is irritated when the eye patches are detached after being attached. The non-adhesive type eye patches were blind patches to be worn by putting into glasses. These products were made using diverse materials such as neoprene, non-woven fabrics, and felt and showed differences in tactile impressions and irritation to the skin depending on material characteristics. In addition, most products were efficient in blocking light with three-dimensional oval designs comprising darts. In the present study, blind eye patches were designed to reduce skin troubles by using sweat-absorbing and quick-drying functional materials with soft tactile impressions. In addition, to increase the effect to block light and the degree of tight contact with the skin when the blind eye patches are worn compared to existing eye patch designs, the sides of the wings of the blind eye patches were widened, glass frame fixing plates were added, and the darts were made to be curved thereby making an ergonomic design reflecting the shape of the face. The non-adhesive type blind eye patches developed in the present study are considered to enhance the wearing sensation with the use of the material without skin irritation but with cushioning feelings and the ergonomic design reflecting the contour of the face.

• 복식문화연구
• /
• 제7권6호
• /
• pp.68-84
• /
• 1999

The purpose of this study was analyze how korean adult women\`s swimming suit buying behavior varied according to consumer characteristics. Especially, it was intended to provide basic materials for swimming suit product development and quality improvement appropriate to consumer characteristics with a focus on product evaluation criteria. Questionnaire research was conducted for 850 adult women resident in Seoul, to whom questionnaire were distributed and who were asked to complete their questionnaires. 1. As for buying motive, of swimming suit buying behavior, it was shown that the highest proportion of adult women bought their new swimming suit because their old swimming suit was wornout and most adult women tended to buy their new swimming suit or their own will rather than at others\` suggestion. 2. As for the source of information at a time. of swimming suit purchase, adult women collected information from the product on display most and bought their swimming suit in a planned way in relation to the degree of purchase planning. 3. As for product evaluation criteria, adult women showed the high scores in order of the type and quality of material, activity and functionalism, dimensions and fitness. 4. In many cases actual swimming suit purchasers were the adult women who bought their swimming suit, and they used the department store or the large shopping center as the place of purchasing the swimming suit. Its reason was that the department store or the large shopping center had a diverse assortment of products. As for the degree of their travelling companion\`s influence, it was found that most adult women were influenced by their travelling companions when purchasing their swimming suits. 5. As for the level of satisfaction with swimming suit purchase, it was shown that adult women were generally satisfied with their swimming suit purchase. It was found that their level of satisfaction was higher in order of activity and functionalism, the type and quality of swimming suit materials, and ease in washing management while they showed the low level of satisfaction with price, the fastness of color to washing, light and detergents and durability.

• 한국건설순환자원학회논문집
• /
• 제6권3호
• /
• pp.167-173
• /
• 2018

일반적으로 고로슬래그 미분말 및 플라이애시의 반응에는 칼슘이 필요하게 된다. 순환골재를 생산하는 과정에서 발생하는 공정부산물은 파쇄단계에 따라 칼슘 함량이 다르며, 공정부산물의 콘크리트 혼합재로서의 활용 가능성도 다르게 된다. 본 연구에서는 공정부산물의 칼슘 함량이 압축강도에 미치는 영향을 확인하고, 이를 활용한 블록을 제작하였다. 공정부산물을 혼합재로 활용하기 위해 칼슘 함량을 분석하였으며 저류블록의 형상에 따른 휨강도 및 표면온도를 측정하였다. 연구 수행을 통해 순환골재 공정부산물을 활용한 블록 제작 가능성을 검증하였으며, 저류량 및 휨강도 확보를 위해 아치형의 저류블록을 제작하였다. 또한, 저류블록의 표면온도는 일반투수블록보다 $9^{\circ}C$ 이상 저감되는 것을 확인하였다.

• 기술경영경제학회:학술대회논문집
• /
• 기술경영경제학회 1992년도 제2회 학술발표회
• /
• pp.119-155
• /
• 1992

Traditionally, the target of manufaturing technology strategy was derived in a efficiency, cost and productivity. So most activities of the manufacturing brought focus into the engineering technology, equipments and research and improvement of new products to maximize the efficiency. As a resell of this legacy, most of the activities of manufacturing has been executed on the method of quality improvement, development of new equipment to incense the efficiency and the research of materials for new products. Those trends, however overlook the operation management activities which is very important as a assets in competitive strategy. But the market enviornment of morden manufacturing companies faced to the uncertainty and complexity. So they need capability of competition which requires new concept of manufacturing technology strategy to grasp the competitive advantages. In this point of view, this paper deal with the empirical study in korean manufacturing technology strategy of the electic and electronic industry. For the empirical study, check list was made to survey the 98 manufacturing companies. The analysis procedures are as below. First, identify the manufacturing technology group an product structure group by each variable. Second manufacturing technology variables are segmented into product technology and vertical integration, suborder and infrastructure, to analyse the decision making pattern which derive the strategy groups. Third, by the fitness analysis between product structure group and manufacturing technology group, the economic results of a growth rate of sale and a profit rate of sale are tested. In this approach, fitness analysis between product structure group and manufacturing technology group show, as a whole, the no significant values in economic results of the company. But investigating the statistical values shows the trend that econmic result of the complany is somewhat higher when the degree of fitness of manufacturing technology strategy by product structure has high value. Concluding the remarks, the competitive advantages of company lies not in the efficiency of manufacturing systems but in the way of the structure and decision making pattern of the manufacturing system. And the cons i stoney between strategy target and manufacturing technology strategy, and the consistency of manufacturing technology strategy and product structure are the term of competitive advantages.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.1.2-1.2
• /
• 2011

With recent advances in materials and products, materials processing experiences new challenges. More particles and polymers in material side and thinner and faster deformations in processing side. It happens in most emergying industries such as manufacturing of batteries, solar cells, multi-layer chips, displays, printed electronics, to list a few. In most cases, they are manufactured by coating or printing process, which is defined as a process in which gas is replaced by liquid on a substrate. In this sense, casting, inkjet printing, and roll-to-roll printing are all included. The printing process consists of three unit processes. As the materials used in the above mentioned applications typically contain a large amount of particles with polymers and solvents, they continuously change microstructures during preparation, flow, and even drying. However, little is known about the flow characteristics of such complex fluids and less is known about how to design and control the process. Therefore, for better control of the process and for better quality of the product, we need to understand the flow characteristics of these complex fluids under extremely fast flow environment.

• 대한금속재료학회지
• /
• 제49권2호
• /
• pp.174-179
• /
• 2011

We investigated the surface morphology changes of a lithium/sulfur battery using multi-walled canbon nanotube added sulfur electrode during charge-discharge cycling. The Li/S cell showed the first discharge capacity of 1286 mAh/g-S, which utilized is 71% of the theoretical value. It decreased to 328 mAh/g-S at the 100th cycle, which corresponds to about 19% utilization of the total sulfur in the cathode. The spherical lumps of the reaction product were observed on the surface of the sulfur electrode. This material was verified as lithium sulfide by X-ray diffraction measurement. The pores in the separator were filled with reaction product. Thus the diffusion of the $Li^+$ ion decreased, which resulted in the decreased capacity of the Li/S cell.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.40.2-40.2
• /
• 2010

In this study, oxidized alginate/gelatin/biphase calcium phosphate (BCP)- based hydrogel composites were fabricated. Alginate sodium was oxidized by periodate. The oxidized product was confirmed by using $^1H$ and $^{13}C$ NMR spectra. The number average molecular weight ($M_n$), the average molecular weight ($M_w$) of the oxidized alginate were determined by Gel Permeation Chromatography (GPC). The hydrogel was formed from the oxidized alginate and gelatin solution via Schift-base reaction. The hydrogel showed a highly porosity by a Scanning Electron Microscope (SEM) and Mercury Intrusion Porosimetry (MIP). Crosslinked density of the gel matrix were assessd by trinitrobenzene sulfonic acid (TNBS) assay that shows a high effect on swelling ratio. Increment of the crosslinked desity resulted in enhancing compressive strength of the hydrogel composite. The cytotoxity of hydrogel was assessed with osteoblast MG-63. The hydrogel composites show a high compatibility. The obtained results showed a potential application for bone regeneration in future.