• 한국항공우주학회지
• /
• 제44권10호
• /
• pp.871-876
• /
• 2016

생산 초기의 초음속 항공기는 블리드 에어 덕트에 존재하는 생산용 자재의 부가 물질이 가열될 경우 조종실에 타는 냄새와 유사한 비정상적인 냄새가 조종실로 유입된다. 조종사가 이와 같은 냄새를 엔진의 화재와 같은 비상 상황으로 오인하는 것을 방지하기 위해 비정상적인 냄새의 원인 물질은 시험 비행 전에 burn-in test를 통해 제거되어야 한다. 그러나, 현재의 절차의 최고 온도보다 고고도 비행의 최고 온도가 더 높기 때문에 냄새를 완벽히 제거 할 수 없다. 본 논문은 고고도 비행의 열적 상황을 분석하여 개선된 burn-in test 절차를 제시한다. 비연속적인 유량 조절, 단위 시간당 높은 온도 변화율, 응축기와 터빈의 한계 온도 차이 때문에 현재의 절차로는 고고도 조건을 모사하지 못하는 것이 확인되었다. 이러한 한계를 극복하기 위해 램에어 입구 제어를 통해 연속적 유량 조절이 가능한 burn-in test 절차를 제시하였다. 제시된 방법을 통해 블리드 에어 온도가 지상에서 고고도 비행 조건 이상임을 확인하였으며, 비행 시험을 통해 비정상적인 냄새를 제거할 수 있음을 검증했다.

• 항공우주기술
• /
• 제6권1호
• /
• pp.165-172
• /
• 2007

우주 발사체는 수많은 부품으로 이루어져 있기 때문에 개발 성공을 위해서는 사소한 부품 하나라도 그 기능을 제대로 발휘하고 고장이 없어야 한다. 이를 위해서 우주 발사체용 부품 및 시스템 개발에는 수많은 시험을 수행하게 된다. 일반적으로 번인시험(burn-in test)은 생산된 제품이 재질이나 작업자의 미숙에 의해 초기 사용기간 중 발생될 수 있는 고장요인을 찾아내기 위한 시험을 통칭한다. 해외 선진국의 경우 번인시험에 대해 규격으로 기술하고 있으며 이에 따라 시험을 수행한다. 본 논문에서는 KSLV-I과 같이 국내에서 개발될 우주 발사체용 부품에 대한 번인시험 적용방법에 대해 고려해 보고자 한다.

• 한국주조공학회지
• /
• 제3권2호
• /
• pp.100-105
• /
• 1983

The mechanism of coal-dust action on inhibiting burn-on of Sand to iron castings was taken in consideration by means of casting test and thermal decomposition test. To compare the ability of inhibiting sand burn-on, test castings were produced in green sand moulds added three different coal-rusts. And quantitative determination of lustrous carbon and volatiles production for coal-dust samples were performed.The lustrous carbon production was in good agreement with the casting test result. But total voltiles production was relatively inefficient on hibiting sand burn-on to test castings.The lustrous carbon theory can be given to explain the mechanism which coal-dust inhibits sand burn-on to iron castings.

• 산업공학
• /
• 제18권3호
• /
• pp.350-360
• /
• 2005

This paper considers a strategy for planning of rework in semiconductor monitoring burn-in test process. The equipment error in monitoring burn-in test process generates many defects. These defects are transformed into good products by rework process, i.e. retest. Rework has the advantage of saving production costs. But rework increases holding costs and incurs rework costs. In monitoring burn-in test process, rework depends on operator's experience with no pre-defined specification. In practice, a number of rework activities are performed with respect to the product importance and inventory quantity. Moreover, disregard for order jobs schedule have caused due date penalties. So a strategy for planning of rework by which order jobs schedule are not affected is suggested. Futhermore, production costs, rework costs and inventory costs for planning of rework are considered.

• 전자공학회논문지B
• /
• 제31B권9호
• /
• pp.1-9
• /
• 1994

This paper analyzes the faults and their mechanism of CMOS ICs using IDDQ testing technique and evalutes the reliability of the chips that fail this test. It is implemented by the three testing phases, initial test, burn-in and life test. Each testing phase includes the parametric test, functional test, IDDQ test and propagation delay test. It is shown that the short faults such as gate-oxide short, bridging can be only detected by IDDQ testing technique and the number of test patterns for this test technique is very few. After first burn-in, the IDDQ of some test chips is decreased, which is increased in conventional studies and in subsequent burn-in, the IDDQ of all test chips is stabilized. It is verified that the resistive short faults exist in the test chips and it is deteriorated with time and causes the logic fault. Also, the new testing technique which can easily detect the rsistive short fault is proposed.

• 한국융합학회논문지
• /
• 제7권6호
• /
• pp.275-285
• /
• 2016

본 연구의 목적은 화상환자 가족의 부담감에 영향을 미치는 요인들을 확인하기 위해 시도된 서술적 조사이다. 연구 대상자는 D시, S시, B시, P시에 소재한 4개 화상전문병원에 입원한 $2^{\circ}$ 이상의 화상환자를 돌보는 가족들 120명을 편의 표집하였고, 자료분석을 위해 t-test, ANOVA, Scheffe' test, Multiple linear regrassion을 시행하였다. 연구결과는 화상환자를 돌보는 가족의 부담감 중 돌봄의 의미와 평가, 환자의 미래에 대한 부담감이 가장 높았다. 화상환자를 돌보는 가족의 부담감 영향요인으로는 결혼상태, 간병시간, 피부이식수술, 체표면적(%)이었고, 설명력은 25.9%로 나타났다. 이상의 결과로 장시간 화상환자를 돌보는 가족들의 신체적, 정서적 부담감을 감소시키기 위한 간호중재 프로그램 개발과 간병 시간을 조절할 수 있는 간병서비스가 필요하다.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.75-80
• /
• 2009

번인 시험(burn-in test)은 초기 장애가 예측되는 반도체 소자들을 제거하기 위한 시험으로서, 보통 소자에 전압, 온도 및 시간 등의 가혹 조건을 가하며 행해진다. 이런 번인 시험을 위해서는 시험할 소자들을 가진 번인 보드들을 해당 슬롯(slot)들에 삽입할 필요가 있다. 이런 슬롯들의 집합을 존(zone)이라 부른다. 한 존을 구성하는 슬롯들은 동종 반도체 소자들을 가진 번인 보드들만을 가질 수 있다. 따라서 많은 이종 반도체 소자들의 시험을 위해서는 존 수가 많도록 번인 시험 시스템을 구성하는 것이 바람직하다 존을 제어하는 존 컨트롤러는 번인 시험을 수행하고 결과를 수집하는 장치이다. 기존 시스템의 경우, 각 존 컨트롤러는 일정 수의 슬롯들로 구성된 한 존의 시험을 담당한다. 대개, 존 컨트롤러는 번인 시험의 전반을 통제하는 한 워크스테이션 내에 내장되어 있으므로 이들의 추가는 물리적 공간의 제약을 받는다. 본 논문은 이런 문제들의 해결이나 완화를 위한 한 방법으로서 존의 슬롯 수를 동적으로 할당할 수 있는 동적 존 시스템을 제안한다. 이 시스템은 존의 슬롯 수를 가변시켜 빈 슬롯을 최소화함으로써 시스템의 운영 효율을 극대화한다. 또한 기존 시스템의 경우에는 정비를 위해 진행 중인 시험을 모두 중지시켜야 하지만, 동적 존 시스템의 경우에는 시스템에 전력을 공급하는 주 전원이 문제가 되지 않는다면 슬롯별로 개별적인 유지보수가 가능하다.

• Nuclear Engineering and Technology
• /
• 제53권6호
• /
• pp.1893-1908
• /
• 2021

In light of the importance of helium production in influencing the behaviour of fast reactor fuels, in this work we present a burn-up module with the objective to calculate the production of helium in both in-pile and out-of-pile conditions tracking the evolution of 23 alpha-decaying actinides. This burn-up module relies on average microscopic cross-section look-up tables generated via SERPENT high-fidelity calculations and involves the solution of the system of Bateman equations for the selected set of actinide nuclides. The results of the burn-up module are verified in terms of evolution of actinide and helium concentrations by comparing them with the high-fidelity ones from SERPENT, considering two representative test cases of (U,Pu)O₂ fuel in fast reactor conditions. In addition, a code-to-code comparison is made with the independent state-of-the-art module TUBRNP (implemented in the TRANSURANUS fuel performance code) for the same test cases. The herein presented burn-up module is available in the SCIANTIX code, designed for coupling with fuel performance codes.

• 대한간호학회지
• /
• 제17권3호
• /
• pp.227-240
• /
• 1987

Infection has assumed increased importance as a cause of death among thermally injured individuals. Decreased treatment effectiveness and an increase in mortality are the hallmarks of nosocomial infection. Infection control is a monumental task that must be achieved to reduce mortalities. This was a retrospective study to survey the epidemiological features of nosocomial infections in a burn unit and to identify the possibilities for infection control. During the past 6 year 2 month period from July, 1981 to August, 1987, 306 burn patients were treated in the burn unit of university hospital. Among of these, 290 cases were the subjects of this study. The data were collected from the patients' records after discharge. All data collected were analyzed using percent, x$^2$-test, t-test with SPSS program. The results of this study are summariged as follows: 1) Infection rate was 40%. According to site, there were 67 cases of wound infection, 60 cases of post-operative skin graft infection, 20 cases of septicemia and 20 cases of donor site infection. As far as the burn size was concerned, the infection rate for patients whose burn size ranged 61 to 70%, was shown to be 100%, followed by the infection rate of 93.8%, for patients whose burn size ranged from 41~50%. As far as the period of time over which the infection developed, 5 to 7 days showed the highest frequency. Further infection was the main cause of deaths and complications. 2) Based upon the results obained by comparing the general characteristics, between a hospital infection-group and non-hospital infection group, there was a significant defference according to age, the time of the year when the accident happened, the place of accident or length of hospital-admission. And according to the result obtained by comparing the general characteristics of the burn, there was a significant difference according to burn size, burn depth, burn type, and burn site. And also based upon the result obtained by comparing the two groups according to method of treatment, there was a significant difference according to the use of antibiotics and to the type of wound-treatment, and for the 8 different binds of treatment related to infection, there was a significant difference for all. In conclusion, age, length of hospital-admission, burn size, burn type, burn site, burn depth, type of woundtreatment and the 8 different binds of treatment, which are related to burns, were shown to be the factors which affect the infection rate in burn patients.

• 대한간호
• /
• 제36권4호
• /
• pp.61-74
• /
• 1997

This study is a descriptive study which was done to examine the circumstances surrounding burn accidents in children in order to develop a burn prevention program. The subjects for the study were the mothers of 107 children admitted to two burn specialty hospitals in seoul and the mothers of 172 healthy children attending day care or kindergarten. The tool used in the study was developed by the researchers, pretested and refined. Cronbach's alpha was 0.72. Data collection was done between November 1995 and April 1996. Statistically analysis was done using SAS Version 6.04 and the data was analyzed using test, chi square, regression and logistic analysis. A suumary of the results shows the following : Eighty percent of the children in both groups lived in nuclear families but comparatively more of the children with burn accidents lived in apartments. More of the parents in the group of healthy children had university education and held white collar or professional jobs, while the parents of the children with burn accidents were slightly younger than the parents of the healthy children. but not significantly younger. A significantly greater number of families of children with burn accidents had more than one child and the characteristics of the children with burn accidents that they were more frequently boys, either first or last born and very active. Most of the burn accidents occurred in fall or winter. sometime between noon and midnight and the majority occurred in the home and were caused by hot liquid. In 86% of the cases emergency care was not given at home but the child was brought to the hospital emergency unit. Most of the burns were second degree or greater. involved the arms or legs. required admission, and 41.5% occurred when the parents were preparing or eating meals. In a test of knowledge of preventive measures, the mothers of children who had suffered burn accidents scored slightly higher than the mothers who had no experience with burn accidents, but this was not statistically significant. As to what to do in the case of a fire, the mothers of the healthy children had more knowledge about who to notify. but 70% of the mothers in both groups did not know how to escape from the house if it was of fire. 80 to 96% did not know what do to in case of a fire, such as rolling if clothes were on fire. 80% did not know what emergency care to give for a burn, and 74 to 87% did not know when it is appropriate to try to put out a fire. It can be concluded from this study that. since the results show that the most frequent situation which resulted in burn accidents was when the parents were not aware of the danger of burns or were not paying attention to the child. and when there were no protective devices to prevent burns. and that accidents most frequently occurred at home. the most effective way of preventing accidents is to develop in the parents a "safety mind", Since burn accidents in children are usually more severe than in adults. the physical. emotional. psychological and social damage is greater. In order to develop and awareness of this in the general public. the use of mass media. books and pamphlets and other educational media that provide education on prevention of burn accidents need to be utilized.