• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.9 no.1
• /
• pp.47-54
• /
• 1991

In this study, the accuracy of three dimensional location was improved by self calibration bundle method with additional parameter, which is to correct systematic error through detection and elimination of the gross error from updated reference variance for observation values in photogram-metry. In this study, with the result of comparing accuracy of each method, correcting systematic error is more effective after gross error detection and when observation values are contained more than two gross error the point with maximum correlation value is detected by masking effect of least square adjustment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.7 no.4
• /
• pp.125-132
• /
• 1987

The bundle adjustment used in photogrammetric data reduction is based on the collinearity condition. Photogrammetry has been used in many non-topographic applications. Due to the necessities of having fiducial marks and knowing initial approximations for interior and exterior orientation elements in bundle adjustment, it cannot be applied when non-metric cameras are used. Marzan and Karara develop the DLT(Direct Linear Transformation) program which directly transforms comparator coordinates into object space coordinates without approximate values. In this paper, several modifications of original DLT program have been made for accuracy improvement in close-range photogrammetry using non-metric cameras. In modified program, gross error detection method and computation of exterior orientation elements are incorporated, and more iterations are introdued.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.2
• /
• pp.95-101
• /
• 2015

The study planned to suggest the efficient methods of system calibration between the range and optical sensors. The simulation was performed by considering i) design of test-bed, ii) mathematical methods of system calibration and iii) locations of the sensors. The test-bed was designed by considering specifications of the range and optical sensors. Also, the error levels of each sensor were considered in the process of simulation with dataset, which was generated under these predetermined conditions. The system calibration was carried out by using the simulated dataset in two different approaches, which are single photo resection and bundle adjustment. The results from the simulation determined that the bundle adjustment method is more efficient than the single photo resection in the system calibration between range and optical sensors. For the better results, we have used the data, obtained in various locations. In a conclusion, the most efficient case was in sequence of i) the bundle adjustment with ii) the simulated dataset, which were obtained between 2m to 4m away from the test-bed.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_1
• /
• pp.895-905
• /
• 2019

Commercial Unmanned Aerial Vehicle (UAV) image processing software products currently used in the industry provides camera calibration information and block bundle adjustment accuracy. However, they provide mapping accuracy achievable out of input UAV images. In this paper, the quality of mapping is calculated by using orientation parameters from UAV image processing software. We apply the orientation parameters to the digital photogrammetric workstation (DPW) for verifying the reliability of the mapping quality calculated. The quality of mapping accuracy was defined as three types of accuracy: Y-parallax, relative model and absolute model accuracy. The Y-parallax is an accuracy capable of determining stereo viewing between stereo pairs. The Relative model accuracy is the relative bundle adjustment accuracy between stereo pairs on the model coordinates system. The absolute model accuracy is the bundle adjustment accuracy on the absolute coordinate system. For the experimental data, we used 723 images of GSD 5 cm obtained from the rotary wing UAV over an urban area and analyzed the accuracy of mapping quality. The quality of the relative model accuracy predicted by the proposed technique and the maximum error observed from the DPW showed precise results with less than 0.11 m. Similarly, the maximum error of the absolute model accuracy predicted by the proposed technique was less than 0.16 m.

• Journal of Korean Society for Geospatial Information Science
• /
• v.23 no.2
• /
• pp.27-38
• /
• 2015

In this study, the 3D position coordinates were calculated for the targets using DLT and self-calibration bundle adjustment with additional parameters in close-range photogrammetry. And then, the accuracy of the results were analysed. For this purpose, the results of camera calibration and orientation parameters were calculated for each images by performing reference surveying using total station though the composition of experimental conditions attached numerous targets. To analyze the accuracy, 3D position coordinates were calculated for targets that has been identically selected and compared with the reference coordinates obtained from a total station. For the image coordinate measurement of the stereo images, we performed the ellipse fitting procedure for measuring the center point of the circular target. And then, the results were utilized for the image coordinate for targets. As a results from experiments, position coordinates calculated by the stereo images-based photogrammetry have resulted out the deviation of less than an average 4mm within the maximum error range of less than about 1cm. From this result, it is expected that the stereo images-based photogrammetry would be used to field of various close-range photogrammetry required for precise accuracy.

• Korean Journal of Geomatics
• /
• v.3 no.1
• /
• pp.23-32
• /
• 2003

Rigorous sensor and dynamic modeling techniques are required if spatial information is to be accurately extracted from video imagery. First, a mathematical model for an uncalibrated video camera and a description of a bundle adjustment with added parameters, for purposes of general block triangulation, is presented. This is followed by the application of invariance-based techniques, with constraints, to derive initial approximations for the camera parameters. Finally, dynamic modeling using the Kalman Filter is discussed. The results of various experiments with real video imagery, which apply the developed techniques, are given.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.233-236
• /
• 2004

In this study, we analyzed the accuracy of the conversion from DLT parameters to physical camera parameters and optimized the use of DLT model for non-metric cameras in photogrammetric tasks. Using the simulated data, we computed two sets of physical camera parameters from DLT parameters and Bundle adjustment for various cases. Comparing two results based on the RMSE values of check points, we optimized the arrangement of GCPs for DLT.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.4 no.1
• /
• pp.49-57
• /
• 1986

Block adjustment procedures are usually classified into three groups according to the smallest units ; the bundle, the model, or the strip. In this paper, three dimensional analysis using a unit model in aerial photogrammetry is studied, and error distibutions are anayzed concerning the control patterns.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.195-202
• /
• 1998

In this study, we utilized various type of GPS observation measurements to get a camera projection center of the aerial triangulation and consequently to determine which type is acceptable. For the accuracy and the error analysis, comparison between a projection center from the conventional model adjustment and the result determined by the kinematic DGPS positioning which is fitted to the conventional model adjustment using 3D conformal transformation method has been made. The camera projection center is located within a $\pm{2m}$ for C/A code range measurements, $\pm{14cm}$ for L1 phase measurements and $\pm{10cm}$ for L1/L2 phase measurements with $1\sigma$. In this way, the accuracy of the camera projection center by the bundle block adjustment can be predicted.

• Journal of Korea Game Society
• /
• v.11 no.4
• /
• pp.143-149
• /
• 2011

This paper presents a novel camera tracking method based on model with multiple planes. The proposed algorithm detects QR code that is one of the most popular types of two-dimensional barcodes. A 3D model is imported from the detected QR code for augmented reality application. Based on the geometric property of the model, the vertices are detected and tracked using optical flow. A clipping algorithm is applied to identify each plane from model surfaces. The proposed method estimates the homography from coplanar feature correspondences, which is used to obtain the initial camera motion parameters. After deriving a linear equation from many feature points on the model and their 3D information, we employ DLT(Direct Linear Transform) to compute camera information. In the final step, the error of camera poses in every frame are minimized with local Bundle Adjustment algorithm in real-time.