• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.11a
• /
• pp.37-41
• /
• 2002

Lap splice is used in building construction up to recently. As buildings become higher and larger, the use of high tensile bar is increasing due to increasing in the use of high compression concrete. However the using of high tensile bar in lap splice causes eccentricity and difficulty in placing of concrete inside the form, therefore not allowing enough intervening material. Various mechanical connection are being developed but the coupler of today needs either a secondary intervening material or secondary processing that consumes much time. Therefore a coupler, needing neither a secondary intervening material nor secondary processing, was made in this study which lead to following results. (1) Breaking occurred in all experimented rebar. (2) Acquirement of tension exceeding the standard requirement. (3) Acquirement of elongation percentage within the standard requirement.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.16-17
• /
• 2014

The curtain wall construction applied on high-rise building facades in Korea became generalized, but specialty of the CMr(Construction Manager) who needs to perform economical project management with specialty in the curtain wall construction is still lacking. Therefore, this study analyzed the structure design standard of the curtain wall, researched economical design alternatives. Based on the research results, if the ratio of dead load against wind load is less than 0.1256, LRFD will be more economical.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.70-71
• /
• 2014

The structural work is the main process of building construction which influence on the time, cost, safety and quality. The form work is one of the main process which has from 20 to 30 percentage of structural work. Especially the form work for beams is complex and need more manpower compared with form work for column or slab. When the existing forms such as plywood form, steel framed wooden form and aluminum form, is used for form work of beam, it would result in the cost overrun caused by needs of lots of manpower and resources. Therefore, the aim of this study is analysis of the requirement for development of SMART beam form. The result of this study shall be used for the development of SMART form work system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.123-125
• /
• 2012

It is the important accurately to identify the needs of our customers in order to success the project. Requirements in the early stages of business is very abstract or not quantitative, and that will cause problems such as cost or schedule changes. Particularly many people are likely to prefer the early stages of the project, because the time of applying VE related cost savings is important. Owner's requirement analysis for project success in the VE process does not easy, and specific ongoing management of the requirement is difficult. Therefore, the analysis and the application of owner's requirements is limited in project process. The purpose of this study is proposed to the RFM technique to supplement the functional analysis on the basis owner's requirements analysis in planning a building project.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.111-112
• /
• 2012

The purpose of this study is to evaluate a defect in apartment buildings as review a safety investigation and consult a defect. As a result to compare a safety investigation to consult a defect, they are almost similar in spite of the purpose and the scope of evaluation are different. Therefore, it needs to establish a special and systemic system, and follow an organized effort about raising a consultant and improving an ability.

• Journal of the Korea Furniture Society
• /
• v.27 no.3
• /
• pp.220-225
• /
• 2016

Recently, As the construction industry has been growing in size and complexity, the utilization of BIM is increased to improve effective management and integration of information. BIM (Building Information Modeling) has been focused on architecture, engineering, construction and maintenance field. However, There is a lack of BIM research on Interior Architecture fields. So It needs more research in this area. Through a previous study that review on BIM applicability of building interior design, this study propose a process of Plan and utilization planning for building Interior design based on BIM. As a result of this, BIM library, 3D simulation, automation for quantity estimation and information management can improve efficiency of business and help decision making for plan.

• Journal of KIBIM
• /
• v.5 no.1
• /
• pp.16-24
• /
• 2015

The kinetic façade system is an interactive building envelope which is adaptive to environmental condition by transforming the behaviour of its components. The design process of kinetic façade system calls for a novel approach. It needs to support designers to adopt technologies from multidisciplinary fields such as physical computing and robotics. In this paper, prototyping method is introduced as a useful technique for implementing kinetic façade systems. In order to incorporate prototyping method into architectural design process, two aspects are investigated in digital design studio: (1) The interactions between digital and analogue environments (2) The role of traditional design tools. Furthermore, the role of BIM is investigated by analyzing two aspects.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.166-167
• /
• 2019

Smart windows are used as windows and doors to determine cooling and heating efficiency in the construction field. It's characteristics can increase the energy saving efficiency. In addition, the function of the smart window that can control the light transmittance transmitted from the external environment of the building to the building according to the needs of the user is attracting attention. In this study, a liquid crystal cell capable of controlling light transmittance of 297 × 210 ㎟ was fabricated by using a liquid crystal device as an optical shutter. Analysis of transmittance change according to driving voltage and driving stability according to thermal environment, We confirmed the applicability of building exterior materials as smart windows.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.71-72
• /
• 2014

Green Frame is a building frame system to construct a column-beam structure using composite precast concrete members. To reduce the cost of producing precast concrete, in-situ production of members is required. However, when the structural members are produced on site, it needs a large space for production. So, "Just-In-Time" production method should be adopted. For Just-In-Time to be realized, the early strength of members should be ensured for them to be transported. Thus, steam curing to secure the early strength is applied in Green Frame. Yet, a large-scale steam curing system is not possible for in-situ production of precast concrete. A smaller steam curing system is needed. In this regard, the study is aimed to develop a new steam curing method applicable to the in-situ production of precast concrete.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.136-142
• /
• 2007

Due to the construction technique (or the construction culture) growth in and out of Korea, newly-developed products have been continuously released. Furthermore, all legislation and regulation that the World follows are gradually becoming unified. (e.g. FTA(Free Trade Agreement) with the United States was contracted, and inevitable FTA contraction with EU and China ), For this reason, it is considered that Korean fire regulation on building interior materials needs to be reviewed and compared with that of international standard so that it becomes legitimate and reasonable one. Especially, this reference is going to make a description of building interior materials' Flame retardant performance standard.