• Journal of the Korea Institute of Building Construction
• /
• v.11 no.6
• /
• pp.609-617
• /
• 2011

For the past several decades, the residential housing market has been led by construction firms rather than consumers; in essence, it has been a suppliers' market. However, the market is experiencing a transition to a buyers' market, the implication of which is that there will be increased competition among the residential building suppliers. For this reason, it is necessary for construction firms to prepare new strategies to respond to the rapidly changing market environment. Furthermore, consumer satisfaction should be valued more highly than in the past, and should be a baseline in formulating construction product development strategy. For the pre-classified 13 apartment building segments, questionnaire surveys are conducted for the 50 CS (Customer Satisfaction) experts to evaluate their perceptions on the weighing of the quality of each apartment segment. Data obtained from a survey of experts was analyzed from an industry perspective utilizing the AHP technique. Analysis results indicate that the CS experts valued the kitchen & dining area more highly than all other segments. Specific analysis results and implications drawn from the study can be a valuable basis for marketing, product development, and quality management.

• KIEAE Journal
• /
• v.14 no.4
• /
• pp.53-60
• /
• 2014

Current supervision systems have been changed by the demands of social, physical and institutional environment, and have a role of preventing safety accident and in improving the construct ability through the analysis of issues in quality, time, construction, safety, and environmental management. The public sector "Construction Technology Management Act", a general and private sector "Building Act" and "Certified Architects Act", the residential building "Housing Act" are dealt with supervision systems, respectively, but private small building construction is excluded from the discussion of the main targets because of their relatively small scale and the lack of social interests, Thus, this study focused on the small buildings for improving the non-resident supervision systems. Survey results revealed that the non-resident supervisor needs to be selected not by clients but by officers in order to obtain its publicity. Based on the proper selection and execution of the supervision system suggested in this study, the potential effects can be summarized as 1) recovering of publicity, 2) correcting abnormal practice, and 3) realizing design intention for increasing the public value of buildings. In addition, findings in this study will be effective to amend current non-resident supervision systems for improving the quality of buildings and communities as well as for adopting the environmental-friendly energy-efficient smart building technologies.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.58-59
• /
• 2017

Through the case study, we surveyed the performance of a CNC-T BAR system on irregular-shaped building construction project. By CNC T-BAR system, we mean a surface curvature control system has been used in aircraft and ship manufacturing by controlling entire surface points on shape. For the past 10 year, the number of irregularly-shaped building design and construction project has been increased, and also the studies on irregular-shaped construction methods have been conducted. However, the previous studies did not review on the performance of the CNC T-BAR system. We collected construction-completed cases in Korea, which applied the CNC T-BAR system, and we studied its performance by comparing with a segment system in terms of construction duration and its quality. The result shows that the CNC T-BAR system can shorten the construction duration comparing with segment-assembly system while maintaining high quality. The CNC T-BAR system is expected to apply on the more number of irregularly-shape building construction project.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.149-154
• /
• 2007

Now, in Korea, the performances of the building service equipment relay on the individual superintendent's share for the assessment of performance, fault detection, deterioration diagnosis of the building service equipment. As the result, very different quality of the performance or the durability of equipment is being obtained with his skill and effort and it is also not easy to assess that quality. This finally lead to the waste of labor force and the operating cost due to the high-cost, low-efficiency system. How to construct the N-BMS was considered to save energy, resource and to conserve performance of building service equipment. The FEMIS, facility, energy/environmental management & information system, for building service offer management process integrated with BAS, FMS and EMS and so on.

• Korean Institute of Interior Design Journal
• /
• v.16 no.4
• /
• pp.47-53
• /
• 2007

As more serious environmental problems of buildings, many researchers have recognized the importance of preserving the environment where we live as well as a necessity of developing architecture with eco-environmentally. As a result, our country and some advanced countries have tried to solve these problems in that developed green building assessment tools for estimating environmental performance of buildings. Among many kinds of buildings, hospital which have been relation with human beings has been laking in basic raw materials of researching hospital's environment. Especially, there are few materials about indoor environment of hospital. So, the facilities of patients not only have to depend on the quality of natural environment but be also taken into account of patients. The purpose of this study is to prepare the basic data to develop the items of indoor environmental assessment for hospital to improve the quality of hospital's indoor environment. To come to a conclusion, we used a method of comparing domestic green building certification criteria, LEED v.2.2 and GBTool 2005. Then, we analyzed them for the case studies. Consequently, we could grasp basic data to assist in effecting domestic green building certification criteria for hopital. Furthermore, we have made a progressive research about setting grades of it.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.1
• /
• pp.157-168
• /
• 2024

The frequent occurrence of structural failures at building construction sites in Korea has underscored the critical role of rigorous oversight in the inspection and management of construction projects. As mandated by prevailing regulations and standards, onsite supervision by designated supervisors encompasses thorough documentation of construction quality, material standards, and the history of any reconstructions, among other factors. These reports, predominantly consisting of unstructured data, constitute approximately 80% of the data amassed at construction sites and serve as a comprehensive repository of quality-related information. This research introduces the SL-QPA model, which employs text mining techniques to preprocess supervision reports and establish a sentiment dictionary, thereby enabling the quantification of quality performance. The study's findings, demonstrating a statistically significant Pearson correlation between the quality performance scores derived from the SL-QPA model and various legally defined indicators, were substantiated through a one-way analysis of variance of the correlation coefficients. The SL-QPA model, as developed in this study, offers a supplementary approach to evaluating the quality performance of building construction projects. It holds the promise of enhancing quality inspection and management practices by harnessing the wealth of unstructured data generated throughout the lifecycle of construction projects.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.19-20
• /
• 2015

In this research, by examining the influence that high quality fine aggregate and low quality fine aggregate have on the strength of concrete through tests, the manifest strength of concrete according to high quality fine aggregate was reviewed. The results showed that compared to low quality fine aggregate usage mixture, the unit volume to achieve the same liquidity decreased and accordingly the W/B also decreased therefore increasing the strength of concrete, and as high quality fine aggregate was used, it is determined that there can be improvements to the economically feasibility of usage mixture and improvement in durability etc.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.132-133
• /
• 2015

In this research by examining the influence that low quality aggregate has on the strength of concrete through testing, the lowering of strength according to use of low quality coarse aggregate was reviewed. The results showed that when using low quality coarse aggregate, due to the quality of aggregate a high volume of units was required, and this caused the compression strength to be lowered. In conclusion it was confirmed that if the low quality aggregate was used as is without mix correction this would lead to faulty construction and if the aggregate was corrected to about 60 kg/m3 mix correction, this would lead to an economically infeasible concrete mix.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• v.y2004m10
• /
• pp.7-10
• /
• 2004

This paper investigated the possibility of quality restoration of deteriorated concrete caused by long distance delivery using chemical admixtures such as superplasticizer. AE agent and retarding agent. According to test results, long distance delivery lead to reducing fluidity and air content markedly, while setting time accelerated. Quality restoration agent(QRA) was made by combining super- plasticizer. AE agent and retarding agent with the proportion of 1:0.0025:0.1. It was confirmed that deteriorated concrete achieved quality restoration with the level of target slump, air content and setting time without strength loss when using QRA with proper amount.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.243-244
• /
• 2016

The assembly of the modular housing is an important phase in the construction of pre-fabricated houses. However, the assembly tools that are commonly used in a work site have a disadvantage of decreasing the productivity and the quality. We have developed a exclusive tool for assembling modular parts. The structural stability of the developed tool has been verified in the previous studies. However, the experimental analysis was not conducted. This study analyzed the effect of improving the productivity and quality of the developed assembly tool. The result of the experimental analysis shows improvements in productivity and quality compared to the conventional assembly tool.