• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.1136-1144
• /
• 2022

The effects of nearby residents and the public by the residual contamination from the decommissioning of nuclear facilities should comply with the dose criteria, and whether additional remediation action is necessary from the ALARA perspective must be determined. Therefore, we analyzed the requirements of ALARA action levels and performed preliminary ALARA evaluation. The ratio of residual contamination concentration to DCGL was calculated for the basement fill and the building occupancy mode. The results showed that the additional remediation actions below DCGL are not justified. In addition, we analyzed the effect of remediation area. It was noted that the increase of the remediation area showed a positive correlation with the Conc/DCGL value in the basement fill mode. On the other hand, in the building occupancy mode, since the floor area of the building is the target of remediation and has the effect of increasing the same as the evaluation area of the building occupants, but due to the difference in the amount of increase, the Conc/DCGL showed a negative correlation. We expect the approach and method of ALARA evaluation can be utilized for concrete cost-benefit calculation during the decommissioning or at the time of remediation.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.101.1-101
• /
• 2001

This paper describes a grid mapping for a vision based mobile robot in uncertain indoor environment. The map building is a prerequisite for navigation of a mobile robot and the problem of feature correspondence across two images is well known to be of crucial Importance for vision-based mapping We use a stereo matching algorithm obtained by singular value decomposition of an appropriate correspondence strength matrix. This new correspondence strength means a correlation weight for some local measurements to quantify similarity between features. The visual range data from the reconstructed disparity image form an occupancy grid representation. The occupancy map is a grid-based map in which each cell has some value indicating the probability at that location ...

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.221-224
• /
• 2008

The purpose of this study is analyzed that the case of remodeling of apartment housing and dweller's consciousness in proposed site of remodeling. The manner of this study focused on the analysis of previous study and documentary survey to the dweller's consciousness level in entire building unit and housing unit of remodeling. The study result was showed that the dwellers who have experienced the remodeling of housing units have a higher recognition than entire building unit, and dweller favor with the variation of extending balcony in remodeling.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.12 s.177
• /
• pp.61-69
• /
• 2005

This paper presents an efficient method of extracting line segments from the occupancy grids in a grid map. The grid map is composed of 2-D grids that have both the occupancy and orientation probabilities using sonar sensors. We evaluate the orientation information of every grid when the occupancy probability of the grid is updated from sonar range data. To find the shape of an object in the map from orientation information, the orientations are clustered into several groups according to their values. The line segments are, then, extracted from the clusters based on Hough transform. Finally, a feature-based map is built with these line segments. The proposed method is illustrated with the results produced by sets of experiments in an indoor environment.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.4
• /
• pp.117-123
• /
• 2012

For an effective energy management in intelligent buildings it is necessary to gather information about position/absence of people and the level of population. In this paper the smart occupancy detection system using the active RFID is developed to satisfy such a demand based on the results of previous research. First of all the design considerations and functions of the system are introduced. In sequence the functions of the system is presented, and then the performance of the developed system is tested and verified through various field tests. The developed core technology can be also applied to other fields such as security, healthcare, smart home, etc.

• Journal of Digital Convergence
• /
• v.11 no.8
• /
• pp.41-52
• /
• 2013

Recently in Korea, it takes place as a social phenomenon the emergency of small family(1-2 persons). The City-Type Housing is constructed new standards and facilities for them from 2009. P.O.E(Post Occupancy Evaluation) carried out the building for a period of time, making the assessment says. The aims of this study were P.O.E. of the City-Type Housing and its political implications. Four City-Type Housing located Gang-Nam, Gang-Buk in Seoul, surveyed 62 questions and interviewed for City-Type Housing office. As the results revealed transportation issues, confined space, parking space, economic issues. In Gang-Nam resident were more satisfactoried the location, the building status, the construction status, the housing size, maintenance and economical sences 95% confidence level. Thus, it should be improved. the upward limited living space, parking space qualified, defined design technical issues.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.4
• /
• pp.49-54
• /
• 2010

Most energy using in building part is mainly consumed for heating and cooling to meet occupancy's comfort temperature. Generally, heating energy consumption show high value than cooling energy in Korea because of high temperature difference in winter season as compared with summer in apartment building. The efforts to develope mechanical performance have been studied to reduce energy consumption in building energy field until now. However, the energy consumption in building is impacted by not only system performance but also PMV particularly at temperature and Clo value. This means that energy consumption can be changed by occupancy's comfort setting temperature in apartment building. This study investigated the passibility of overheating in apartment building by occupant' slow Clo and its setting temperature from preceding research and then the heating energy consumption by setting temperature was calculated with ESP-r. The effects of heating energy and $CO_2$ reduction are also evaluated quantitatively with Clo value. The results showed that keeping ISO-7730 standards can reduce heating energy up to 21% in compared with option 2; also, wearing underclothes with ISO-7730 standard can considerably reduce heating energy consumption up to 50%. As compared with option 2, the reduction of $CO_2$ emission for option 3 showed 0.63TCO2 of kerosene, 0.49TCO2 of LNG and 1.09TCO2 of electricity. The option 4 can be reduced by 1.48TCO2 of kerosene, 1.16TCO2 of LNG and 2.57TCO2 of electricity respectively.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.6
• /
• pp.78-85
• /
• 2011

In this study, an underfloor air distribution(UFAD) system installed on the S. office building was evaluated for its indoor environmental quality performance. Field measurement and survey were conducted for the overall POE(Post Occupied Evaluation). PMV(including temperature, humidity, air velocity and globe temperature) and several environmental components were measured while thermal comfort, thermal sensation, acoustical environment and others. were investigated through survey. Except for the direct upper part of the air supply diffuser on the floor, the indoor velocity was less than 0.25m/s, which has been suggested by ASHRAES tandard 55 as the limit for thermal comfort. MRT of the perimeter zone of the room showed a higher value than that in the interior because of the introduced solar radiation through the building envelope. PMV was generally maintained in the range of thermal comfort (from -0.5 to +0.5), though it weighted to the warm side. It was reported to have 61% positive response on thermal comfort and 55% on neutral thermal sensation. The results of each survey item showed some gender-based differences. Specifically, female respondents had higher degree of dissatisfaction with indoor air cleanness and acoustical privacy. The working surface showed more than 400 lux and the equivalent noise level showed less than 50 dB(A). In conclusion, the results of the measurement and survey showed good agreement. Indoor environmental quality of the subject office room where the UFAD system was installed showed an overall excellent performance.

• Fire Science and Engineering
• /
• v.3 no.1
• /
• pp.19-28
• /
• 1989

It has been recognized that the escape facility planning is very important for effective evacuation of accupants on fire event. The ultimate goal of the escape facility planning is to evacuate occupants rapidly from building fires to the safe areas. In fire event, occupants usually gather, utilize and finally act upon information about state transient of building fire system, which is consisted of components of fire, building and accupant during the ralatively short period of the fire event. That is, occupants' egress behavior is largely dependent upon building fire system. Therefore, comprehensive study for the relationship between building fire system and occupants' egress behavior is needed. This study aims to suggest the pre -occupancy evaluation method of the life safety performance for the architectural design based on prediction of occupants' egress behavior during building fires with computer simulation.

• Journal of the Korean housing association
• /
• v.15 no.2
• /
• pp.55-62
• /
• 2004

Apartment design in residential Area is restricted by building distance limit code. Building distance limit decreases gradually to the 0.8H(height), and residential area has 250% site area ratio by building code, so site using has become efficient. In this study, examine the relationship between present building distance limit and right of daylighting environment by computer simulation. As well, high-rise residential officetel and multipurpose residential building becomes increase in commercial non-residential area. In the domestic, residential type multipurpose building made at the business area or central business area has 400∼800% site area ratio by building code. However, at a dweller's point of view, there are much lacks of environmental consideration to provide suitable daylighting environment. And, POE: Post Occupancy Evaluation is not completed yet. In this study, however, progress architectural environment prediction, basis by right of daylighting, and examine the possibility of daylighting by architectural distance limit code in residental area and by high-rise, high-density residential building in non-residental downtown area.