• 지적과 국토정보
• /
• 제46권2호
• /
• pp.341-356
• /
• 2016

토지정보와 건물정보는 부동산, 도시행정 분야에 있어서 가장 핵심이 되는 공간정보이지만 융복합 및 통합적인 활용이 용이하지 않아 통합정보서비스가 제공되기 어려웠다. 본 연구에서는 토지정보와 건물정보에 대한 통합정보시스템의 필요성과 정보 융합의 방법론, 통합시스템의 구축 방안을 제시하였으며 프로토타입 시스템을 개발하여 통합정보에 대한 활용 가능성을 제시하고자 하였다. 이를 위해 토지정보와 건물정보에 대한 관리 현황을 분석하였으며, 이를 바탕으로 토지 및 건물에 대한 다양한 공간정보와 속성정보 간의 매칭 및 융합 프로세스를 적용하였다. 융합된 토지 건물정보 DB를 기반으로 한 통합정보시스템과 기능을 설계함으로써 프로토타입 시스템을 구현하였다. 마지막으로, LX가 시스템을 운영하면서 부동산 및 도시행정 분야에 제공할 수 있는 정보서비스 사례들을 제시하였다.

• 한국BIM학회 논문집
• /
• 제5권4호
• /
• pp.53-62
• /
• 2015

Korea has been at the forefront of green growth initiatives. In 2008, the government declared the new vision toward 'low-carbon society and green growth'. The government subsidies and Feed-in Tariff (FIT) increased domestic usage of solar power by supplying photovoltaic housing and photovoltaic generation systems. Since 2000, solar power industry has been the world's fastest growing source with the annual growth rate of 52.5%. Especially, BIPV(Building Integrated Photovoltaic) systems are capturing a growing portion of the renewable energy market due to several reasons. BIPV consists of photovoltaic cells and modules integrated into the building envelope such as a roof or facades. By avoiding the cost of conventional materials, the incremental cost of photovoltaics is reduced and its life-cycle cost is improved. When it comes to atypical building, numerous problems occur because PV modules are flat, stationary, and have its orientation determined by building surface. However, previous studies mainly focused on improving installations of solar PV technologies on ground and rooftop photovoltaic array and developing prediction model to estimate the amount of produced electricity. Consequently, this paper discusses the problem during a planning and design stage of BIPV systems and suggests the method to select optimal design of the systems by applying the national strategy and economic policies. Furthermore, the paper aims to develop BIM tool based on the engineering knowledge from experts in order for non-specialists to design photovoltaic generation systems easily.

• KIEAE Journal
• /
• 제4권3호
• /
• pp.113-119
• /
• 2004

As Building Integrated Photovoltaic(BIPV) system replaces the conventional building finishing materials with PV modules, two function of electricity generation and building envelope can be expected. Therefore BIPV can be a good alternative technology for the 21 century environment-friendly buildings. The objective of this paper is to develope BIPV modules for a commercial buildings of which structure is mainly light-weight, curtain wall system. Two types of module are developed for a opaque part and a transparent part of building envelope. Current technology level and market status of Korea determines the configuration of developed BIPV modules. Architectural considerations for the integration of PV module to building envelope such as building structure, construction type, safety, regulation, maintenance etc. have been carefully reflected from the early stage of BIPV module design. Especially the survey result of current building envelope materials determines the size of unit BIPV modules and a unique cladding method for PV module installation is developed. Trial product of BIPV modules and cladding hardwares are manufactured and sample construction details for a demonstration building are proposed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제17권5호
• /
• pp.13-20
• /
• 2013

구조물의 지진응답을 저감시키기 위하여 추가적인 감쇠기나 진동제어장치가 일반적으로 사용된다. 이때, 추가적인 감쇠장치의 제어성능은 대상구조물 특성의 변화 없이 검토된다. 본 연구에서는 구조물과 스마트 제어장치의 다목적 통합최적화를 수행하였고 스마트 최상층 면진시스템이 설치된 구조물의 구조물량 저감의 가능성을 분석하였다. 이를 위하여 20층 예제구조물이 사용되었으며 MR 감쇠기와 저감쇠 탄성베어링을 사용하여 스마트 면진시스템을 구성하였다. 중약진지역의 설계스펙트럼을 바탕으로 생성된 인공지진하중을 사용하여 구조해석을 수행하였다. 수치해석결과, 스마트 최상층 면진시스템이 중약진지역에 있는 구조물의 응답과 면진층 변위를 동시에 효과적으로 줄일 수 있는 것을 확인하였다. 본 연구에서 제안된 통합최적설계기법으로 구조물량 및 감쇠기 용량을 적절하게 줄이면서도 우수한 제어성능을 발휘하는 다양한 설계 대안을 제공할 수 있었다.

• 한국디지털건축인테리어학회논문집
• /
• 제2권1호
• /
• pp.16-23
• /
• 2002

The Subject of this research is building integrated library to supported to CAAD of the A.E.C field that is oriented to the environment of integrated design. In this research, we design and implement a new library model as a solution of design-data sharing and multi-displaying that is on the rise among many problems in construction integration. We name this integrated library ACO(Actual Component Object) and using the ACO, we can share data without loss in the fields such as construction, estimation, structure. Together with this, the different expressions along each field provide the solution of sharing both graphic data and non-graphic data. This ACO is a newly conceptualized Library that is able to supply a composite structure to an architect(designer) through the internet-based ACO System. To the ACO System that supplies those ACO service, we introduce the concept of DBMS in design and design administrator, and we investigate the solutions that enable an architect to use this ACO directly on the Web.

• 국제초고층학회논문집
• /
• 제7권3호
• /
• pp.233-242
• /
• 2018

Since the response reduction effect on over 200-meter-tall resulting from the seismic isolation system is smaller in general than low-rise and mid-rise buildings, mid-story isolated buildings are considered to reduce the response in the upper part above the isolation story, however, in many cases, the acceleration response just below the isolation story is likely to be the largest. This paper presents the structural design schemes, the design of the main structural frames, and the constructions of a 230-meter-tall super high-rise building with mid-story isolation mechanism integrated in Roppongi, Tokyo. Moreover, this paper shows how the architectural and structural design for integrating a mid-story isolation system in a super high-rise building has been conducted and what solutions have been derived in this project. The realization of this building indicates new possibilities for mid-story isolation design for super high-rise buildings.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1049-1054
• /
• 2009

Sustainable housing design can contribute to dramatically reduced energy usage and can be applied to all new building projects. This paper explores the potential in Korea of applying available energy efficient building technologies. The objective was to determine the degree of energy reduction that can easily be achieved in new building design. The pilot project is providing some prototypes with display units which incorporate principles of sustainable design and performance utilizing the eco-design objectives. This building challenges ingrained preconceptions about system designs for four energy saving levels(40%, 60%, 80% and zero energy) and exposes barriers to low energy buildings posed by new standards and guidelines.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.139-149
• /
• 2011

This study focuses on design tendencies in office buildings of public institutions after tightening up Korea's building energy performance criteria. Important office design criteria and recommendations pay attention to the issues such as building orientation, greening buildings, building form, space and envelop by intensifying building energy performance related laws, government guidelines and evaluation systems. The design tendencies explored in this research are as follows. Office buildings mainly face south and have various types of indoor and roof green spaces not for ecological reasons but for the rest. Building depth becomes thinner and atria are inserted into office buildings to improve daylighting and natural ventilation. Building cores are located on north or west and east sides acting as buffer spaces to reduce heat loss and to block solar radiation. Office building envelop design includes various creative ideas to control or utilize solar energy as like three dimensional or double structured skin and window size variation to cope with the intensity of solar radiation. Further, solar energy generation systems are integrated with building component such as roofs, sun screens and windows. This study demonstrates that government's reinforcement of the building energy performance criteria drives the change in design methods and approach.

• 교육시설
• /
• 제15권6호
• /
• pp.39-46
• /
• 2008

The main purpose of this study is to find out the strengths and weaknesses of the application of BIM to the educational facilities. All the data information is drawn from the integrated design process which links various fields such as energy simulation, structure analyzation, and etc, and it is applied to the project combined as one data set. Moreover, we analyze the possible problems of the data exchange that can happen as collaborating with various fields while working on the project, and we present its solutions and the futher studies on this matter of a project.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 추계 학술논문 발표대회
• /
• pp.159-165
• /
• 2008

For deciding the profitability and feasibility of the construction project, the schematic estimation has to not only link the design decision-making but also estimate the cost with reliability. The Object-based schematic estimation system was developed for easily linking with design-making and supports to evaluate the design alternatives in the design development stage but didn't consider the cost estimated by object supplementary and parameter work item. This research presents the Integrated Object-Parameter Schematic Estimation Model in the design development stage that can lead to more accurately estimate the cost through analyzing historical data from the high-storied office buildings. For the development of the proposed model for schematic estimation, after analyzing and classifying the work items from the Bills of Quantities(BOQs) and drawings of historical data, this research proposed the methods of estimating cost in accordance with attributes of each work item using regression analysis. In addition, a case study is performed for the effectiveness as comparing the proposed model with the previous estimating model.