• 복합신소재구조학회 논문집
• /
• 제4권2호
• /
• pp.39-44
• /
• 2013

This study is aimed to examine the influence of the rotational stiffness of U-shaped ribs on the local buckling behaviors of laminated composite plates. Applying the orthotropic plates with eight layers of the layup $[(0^{\circ})4]s$ and $[(0^{\circ}/90^{\circ})2]s$, 3-dimensional finite element models for the U-rib stiffened plates were setup by using ABAQUS and then a series of eigenvalue analyses were conducted. There is a need to develope a simple design equation to establish the rotational stiffness effect, which could be easily quantified by comparing the theoretical critical stress equation for laminated composite plates with elastic restraints based on the Classical laminated plate theory. Through the parametric numerical studies, it is confirmed that there should clearly exist an increasing effect of local plate buckling strength due to the rotational stiffness by closed-section ribs. An applicable coefficient for practical design should be verified and proposed for future study. This study will contribute to the future study for establishing an increasing coefficient for the design strength and optimum design of U-rib stiffened plates.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.223-227
• /
• 2004

The pultruded structural shapes are usually composed of thin-walled plate elements. Because the composite material has relatively low elastic moduli, the design of pultruded compression members may not be governed by the material strength limit state but by the stability limit state such as the local buckling or the global buckling. Therefore, the stability limit state must be checked to design pultruded columns. In this research, the local buckling analysis of pultruded I-shape column was conducted for various composite materials using the closed-form solution. To establish the design guidelines for the local buckling of pultruded I-shape compression members, the simplified form of equation to find the local buckling coefficient of pultruded I-shape column was proposed as a function of mechanical properties and the width ratio of plate components using the results obtainde by the closed-form solution. In order to verify the validity of proposed solution, the results obtained by the proposed approximate solution were compared with those of the closed-form solution and the experimental results.

• International Journal of Safety
• /
• 제9권1호
• /
• pp.21-29
• /
• 2010

When a new member of a scaffold is developed, it is necessary to follow the standard. Therefore, all scaffolds will assume the same structure. The aim of this study was to establish a new method for evaluating scaffold performance. In the present study, a buckling analysis of prefabricated scaffolds was executed, using the shear rigidity of the vertical and the horizontal frames as parameters. From the results, an equation is proposed for evaluating the strength of prefabricated scaffolds.

• 대한토목학회논문집
• /
• 제28권3A호
• /
• pp.367-373
• /
• 2008

국내/외에서 설계되는 강곡선거더교 복부판의 전단강도는 복부판의 4변을 단순지지라는 가정 하에서 산정되는 탄성전단좌굴강도로 제안하고 있다(AASHTO Guide Specifications, 2003). 그러나, Lee et al.(1996, 1999)과 Bradford(1996)의 최근 연구에서 실제의 설계범위를 갖는 직선이나 곡선 복부판에서 어느 정도의 강성을 갖는 플랜지에 의해서 접하는 변의 경계조건은 단순지지 보다는 고정지지에 더 근접하며, 복부판의 형상비에 따라서는 AASHTO의 탄성좌굴강도가 60%이상 낮게 평가되고 있음을 발표하였다. 특히 강곡선복부판의 전단좌굴강도는 곡률의 영향으로 AASHTO Guide Specifications(2003)의 탄성전단좌굴강도보다 최대 38%이상 증가하고 있음이 Lee and Yoo(1999)의 연구에서 조사되었다. 본 논문에서는 선형좌굴해석을 이용하여 곡률과 경계조건이 동시에 고려된 강곡선 복부판의 전단좌굴계수를 합리적으로 추정할 수 있는 산정식을 제안하고자 한다.

• Steel and Composite Structures
• /
• 제12권3호
• /
• pp.183-205
• /
• 2012

This paper presents an investigation of the effect of inclined stiffeners on the load-carrying capacity of simply-supported hot-rolled steel I-beams under various load conditions. The study is carried out using finite element analysis. A series of beams modeled using 3-D solid finite elements with consideration of initial geometric imperfections, residual stresses, and material nonlinearity are analyzed with and without inclined stiffeners to show how the application of inclined stiffeners can offer a noticeable increase in their lateral-torsional buckling (LTB) capacity. The analysis results have shown that the amount of increase in LTB capacity is primarily dependent on the location of the inclined stiffeners and the lateral unsupported length of the beam. The width, thickness and inclination angle of the stiffeners do not have as much an effect on the beam's lateral-torsional buckling capacity when compared to the stiffeners' location and beam length. Once the optimal location for the stiffeners is determined, parametric studies are performed for different beam lengths and load cases and a design equation is developed for the design of such stiffeners. A design example is given to demonstrate how the proposed equation can be used for the design of inclined stiffeners not only to enhance the beam's bearing capacity but its lateral-torsional buckling strength.

• 한국공간구조학회논문집
• /
• 제2권4호
• /
• pp.45-52
• /
• 2002

Research about spherical shells been applying most usually is achieved by many investigators already and generalized equation has been derived. But, existent research is limited in case that spherical shell's roof rigidity is isotropy or orthotropy, and research that consider periodicity of rigidity-distribution that can happen by doing spherical shell's roof system by lattice system is not gone entirely. The purpose of this paper is applying Galerkin method to spherical shell that model periodicity of roof rigidity distribution that appear by roof lattice form of large space structure and develop structural analysis program that formularize. Rigidity-model of this research selects that of spherical shell which has 2-way grid. In this paper, buckling-strength and deformation distribution of isotopic spherical shell and 2-way grid spherical shell obtained by developed program could confirm the reliability by comparison with result of existent research.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2010년도 정기 학술발표대회
• /
• pp.83.2-83.2
• /
• 2010

Stepped I-beams having increased moment of inertia at one end(singly stepped beam) or both ends(doubly stepped beams) can often be seen in construction of bridges due to material economy and easy fabrication of the section. This paper presents the results of the parametric study of lateral torsional buckling of monosymmetric stepped I-beams with constant depth subjected to equal and opposite end moments applied at the end of the beam. Design recommendations were made based on the finite element results of the models having different combinations of monosymmetric ratio, stepped length ratio, flange thickness ratio and flange width ratio,. The proposed approximation is acceptable based on the parameters given having mostly conservative results. The proposed equation can be further used to extend the study to different loading conditions.

• Steel and Composite Structures
• /
• 제48권6호
• /
• pp.681-691
• /
• 2023

Stainless steels are commonly employed in engineering applications since they have superior properties such as low maintenance cost, and high temperature and corrosion resistance. These features allow them to be preferred in cylindrical shell structures as well. The behavior of a cylindrical shell structure made of stainless steel can be quite different from that made of carbon steel, as the material properties differ from each other. This paper deals with buckling behavior of axially loaded cylindrical shells made of stainless-steel. For this purpose, a combined experimental and numerical study was carried out. The experimental study comprised of testing of 18 cylindrical specimens. Following the experimental study, a numerical study was first conducted to validate test results. The comparisons show that finite element models provide good agreement with test results. Then, a numerical parametric study consisting of 450 models was performed to develop more generalized design recommendations for axially compressed cylindrical shell structures made of stainless steel. A simple formula was proposed for the practical design purposes. In other words, buckling strength curve equation is developed for three different fabrication quality.

• 대한토목학회논문집
• /
• 제32권3A호
• /
• pp.149-160
• /
• 2012

파형강판은 보강재 없이 높은 전단 저항력을 가지며, 보강재를 생략함으로써 상부구조의 용접을 최소화하고 피로 성능을 향상시킨다. 이러한 장점으로 인하여 최근에 파형강판을 I-거더의 복부판으로 사용하려는 연구가 여러 연구자들에 의하여 수행되었다. 횡-비틂 좌굴은 I-거더를 설계함에 있어 주요한 설계인자이지만 불균일 모멘트와 같은 실제 하중이 작용하는 파형강판 I-거더의 횡-비틂 좌굴에 관한 연구는 현재 미흡한 실정이므로 이에 대한 연구가 필요하다. 본 연구에서는 파형강판 I-거더의 횡-비틂 좌굴 강도에 관한 연구를 수행하였다. 먼저 선형 모멘트 구배가 작용하는 파형강판 I-거더의 탄성 횡-비틂좌굴 거동에 관한 연구를 유한요소해석을 통하여 수행하였다. 본 연구 결과, 파형강판 I-거의 탄성 횡-비틂 좌굴 거동은 파형강판의 파형 주기수에 따라 달라지는 것을 알 수 있었으며, 선형 모멘트 구배가 작용하는 파형강판 I-거더에 대한 모멘트 구배 수정 계수를 제안하였다. 이 후 비탄성 유한요소해석 결과와 일반 I-거더의 설계 방법을 이용하여 파형강판 I-거더의 비탄성 좌굴 강도에 관하여 연구를 수행하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권3호
• /
• pp.10-19
• /
• 2014

파형강판은 제형, 정현형 등의 형상으로 얇은 강판을 주름지게 가공한 것으로 두꺼운 평판을 대신하여 사용하여도 높은 면외방향의 강성을 확보할 수 있다. 또한, 아코디언효과로 축방향 강성이 거의 없어 플레이트거더의 웨브에 적용할 경우 웨브가 전단력만을 부담하는 방법으로 쉽게 설계할 수 있다. 그러나 파형강판의 전단좌굴은 평판과는 달리 국부좌굴과 전체좌굴 외에도 이들의 연성에 의해서도 좌굴이 발생하는 매우 복잡한 특성이 있으며, 이러한 연성좌굴에 대한 원인과 특성의 규명은 정현형의 경우 제형보다 연구결과가 부족한 실정이다. 따라서 본 연구에서는 정현형 파형강판의 전단좌굴 특성과 연성좌굴이 발생하는 경향에 대해서 연구하였다. 전단좌굴강도를 계산하기 위해서는 유한요소프로그램을 이용하였고 해석결과를 정해와 비교하였다. 또한, 주름의 두께와 형상 파라메타에 따른 좌굴응력 변화의 특성과 좌굴모드형상의 변화를 분석하였으며, 이들의 결과를 이론식의 결과와 비교하여 좌굴양상의 변화시점에 대해서 분석하였다.