• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.824-827
• /
• 1987

The miniturization of a DC-DC converter circuit in connection with the stability is investigated in this paper. As both the capacitance of the smoothing capacitor and the inductance of the reactor are reduced by raising the switching frequency, it is known that the stability of the buck converter declines with the switching frequency but the buck-boost converter has a nearly uniform stability. Furthermore, that in the frequency region above a certain switching frequency the buck-boost converter is suitable for the miniturization of circuit is cleared.

• 전자공학회논문지S
• /
• 제34S권6호
• /
• pp.77-84
• /
• 1997

buck type converter doesn't appear when an input voltag eis lower than an output voltage. This is the main reason the buck converter has not been used for high power factor converters. In this paper, soft switching high power factor buck converter is proposed. This converter is composed of diode rectifier, input capacitor can be small enough to filter input current, buck converter with loss less snubber circuit. Converter is operated in discontinous conduction mode, turn on of the switching device is a zero current switching (ZCS) and high powr factor input is obtianed. In addition, zero voltage switching (ZVS) at trun off is achieved and switching loss is reduced using loss less snubber circuit. The capacitor used in the snubber circuit raised output voltage. Therefore, proposed converter has higher output voltage and higher efficiency than conventional buck type converter at same duty factor in discontinous conduction mode operation. High power factro, efficiency, soft switching operation of proposed converter is veified by simulation using Pspice and experimental results.

• 한국전자통신학회논문지
• /
• 제15권5호
• /
• pp.889-896
• /
• 2020

일반적으로 스텝 업(Step-up) 컨버터는 Boost 컨버터, Buck-Boost 컨버터, Flyback 컨버터, Push-Pull 컨버터 등 다양하며 이 중에서 Boost 컨버터는 매우 간단한 형태로 가장 널리 사용되는 스텝 업(Step-up) 컨버터이다. 하지만, Boost 컨버터는 DCM 동작, 큰 리플 문제 및 RHPZ 문제 등을 가지고 있다. 이러한 문제를 해결하기 위해 새로운 Topology를 적용한 컨버터들이 제시되었는데 그 중 KY 컨버터는 Boost 컨버터의 DCM 동작, 큰 리플 문제 및 RHPZ 문제 등을 개선하였다. 그러나 기존의 KY 컨버터는 Boost 컨버터보다 전압 이득이 상대적으로 낮은 단점이 있다. 따라서 본 논문에서는 기존의 KY 컨버터의 장점이 있으면서 낮은 전압 이득 문제를 해결한 새로운 Topology의 KY 컨버터를 제안하였다.

• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1074-1080
• /
• 2020

본 논문은 공정, 전압 및 온도에 둔감하며, 출력전압 상태에 따라 3가지 동작모드가 가능한 디지털 제어 벅 변환기를 제안한다. 기존 디지털 제어 방식의 벅 변환기는 A/D 변환기, 카운터 및 딜레이 라인 회로를 사용하여서 정확한 출력 전압을 제어하였다. 정확한 출력 전압 제어를 위해서는 카운터 및 딜레이 라인 비트 수를 증가시켜서 회로 복잡성 증가 문제점을 지니고 있다. 이러한 회로의 복잡성 문제를 해결하기 위해서 제안된 회로에서는 8비트 및 16 비트 양 방향 쉬프트 레지스터를 사용하고 최대 128비트 해상도까지 듀티비 제어가 가능한 벅 변환기를 제안한다. 제안하는 벅 변환기는 CMOS 180 나노 공정 1-poly 6-metal을 사용하여 설계 및 제작하였으며, 2.7V~3.6V의 입력 전압과 0.9~1.8V의 출력 전압을 생성하고, 리플전압은 30mV, 전력 효율은 최대 92.3%, 과도기 응답속도는 4us이다.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.432-443
• /
• 2014

In order to improve the output efficiency of solar cells and to extend the life span of batteries, the input currents of converters are required to be continuous. If low output voltage ripple is required at the same time, it is obvious that the application of basic two-order converters (such as Buck and Boost derived converters) will not be good enough. In this paper, a lot of non-isolated push-pull converters (NIPPCs) with continuous current will be introduced due to their lower current stress, higher efficiency and better EMC performance. By decomposing the converters into push-pull cells, inductor and free-wheeling diodes, two families of NIPPCs based on single inductor and coupled inductor separately are systematically generated. Furthermore, characteristics analyses for some of the generated converters are also shown in this paper. Finally, two prototypes based on the corresponding typical topologies are built in the lab to verify the theoretical outcomes.

• 전력전자학회논문지
• /
• 제19권2호
• /
• pp.116-123
• /
• 2014

In this paper, a soft-switching scheme for the PWM interleaved buck converter(IBC) is newly proposed to obtain the advantages of both the conventional PWM interleaved buck and resonant converters such as ease of control, reduced switching losses and stresses, and low EMI. To obtain the soft-switching action, the proposed scheme employs an auxiliary circuit, which is added to the conventional interleaved buck converter and used to achieve soft-switching for both the main switches and the output diodes while not incurring any additional losses due to the auxiliary circuit itself. In this paper, the basic operations are discussed and design guidelines are presented. And through the experimental results, the usefulness of the proposed converter is verified.

• Journal of Power Electronics
• /
• 제10권2호
• /
• pp.115-124
• /
• 2010

In this paper, a simple yet efficient auto mode-hop ripple control structure for buck converters with light load operation enhancement is proposed. The converter, which operates under a wide range of input and output voltages, makes use of a state-dependent hysteretic comparator. Depending on the output current, the converter automatically changes the operating mode. This improves the efficiency and reduces the output voltage ripple for a wide range of output currents for given input and output voltages. The sensitivity of the output voltage to the circuit elements is less than 14%, which is seven times lower than that for conventional converters. To assess the efficiency of the proposed converter, it is designed and implemented with commercially available components. The converter provides an output voltage in the range of 0.9V to 31V for load currents of up to 3A when the input voltage is in the range of 5V to 32V. Analytical design expressions which model the operation of the converter are also presented. This circuit can be implemented easily in a single chip with an external inductor and capacitor for both fixed and variable output voltage applications.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1429-1439
• /
• 2019

Buck-Boost LLC (BBLLC) converters based on a PWM + phase control strategy are good candidates for high efficiency, high power density and wide input range applications. Nevertheless, they suffer from large computational complexity when it comes to calculating the optimal phase for ZVS of all the switches. In this paper, a method is proposed for a microcontroller unit (MCU) to calculate the optimal phase quickly and accurately. Firstly, a 2-D lookup table of the phase is established with an index of the input voltage and output current. Then, a bilinear interpolation method is applied to improve the accuracy. Meanwhile, simplification of the phase equation is presented to reduce the computational complexity. When compared with conventional curve-fitting and LUT methods, the proposed method makes the best tradeoff among the accuracy of the optimal phase, the computation time and the memory consumption of the MCU. Finally, A 350V-420V input, 24V/30A output experimental prototype is built to verify the proposed method. The efficiency can be improved by 1% when compared with the LUT method, and the computation time can be reduced by 13.5% when compared with the curve-fitting method.

• 전력전자학회논문지
• /
• 제22권4호
• /
• pp.360-368
• /
• 2017

This paper proposes the 80-kW high-efficiency bidirectional hybrid SiC boost/buck converter using droop control for DC nano-grid. The proposed converter consists of four 20-kW modules to achieve fault tolerance, ease of thermal management, and reduced component stress. Each module is constructed as a cascaded structure of the two basic bi-directional converters, namely, interleaved boost and buck converters. A six-pack hybrid SiC intelligent power module (IPM) suitable for the proposed cascaded structure is adopted for high-efficiency and compactness. The proposed converter with hybrid switching method reduces the switching loss by minimizing switching of insulated gate bipolar transistor (IGBT). Each module control achieves smooth transfer from buck to boost operation and vice versa, since current controller switchover is not necessary. Furthermore, the proposed parallel control using DC droop with secondary control, enhances the current sharing accuracy while well regulating the DC bus voltage. A 20-kW prototype of the proposed converter has been developed and verified with experiments and indicates a 99.3% maximum efficiency and 98.8% rated efficiency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.1022-1024
• /
• 1992

The multiple poly-phase converters to be overcome the current limits of switching devices have the merits of the lessen weight and ripple. This paper deals with the circuit analysis of the poly-phase buck converters with discontinuous inductor current. The dc and ac models are obtained by the average method of the state equations.