• 대한소아치과학회지
• /
• 제49권3호
• /
• pp.253-263
• /
• 2022

협측소와는 하악 대구치 발달구의 말단에 나타나는 강한 점상의 함몰된 구조이다. 협측소와 결함은 협측소와가 상아질까지 침범한 상태로 정의할 수 있다. 이 연구는 콘빔 컴퓨터 단층촬영(CBCT) 분석을 통해 소아청소년의 하악 제1대구치 및 제2 대구치에서 협측소와 및 협측소와 결함의 발생 빈도를 조사하는 것을 목적으로 하였다. 연구는 2004년부터 2020년까지 연세대학교 치과병원 소아치과를 방문한 한국 소아청소년 417명을 대상으로 촬영한 CBCT 영상을 대상으로 수행하였다. 협측소와의 발현율은 29.1%로 보고되었다. 제4급 협측소와에 해당하는 협측소와 결함의 유병률은 총 7.9%였다. 협측소와는 양측성으로 나타나는 경향이 있었다. 이 연구는 협측소와의 빈도에 대해 가장 큰 표본 크기를 사용하여 시행한 포괄적인 연구이며, CBCT를 이용한 최초의 연구였다. 또한 협측소와 결함을 최초로 정의 내리고자 하였다.

• 대한소아치과학회지
• /
• 제45권1호
• /
• pp.57-64
• /
• 2018

Pre-eruptive intracoronal resorption (PEIR)은 맹출 전 치아의 치관 내에서 나타나는 발달 상의 결함을 의미한다. 본 연구의 목적은 파노라마 방사선 사진의 미맹출 하악 제1대구치 협측 소와에서 PEIR로 의심되는 방사선 투과상과 맹출 중인 하악 제1대구치에서 협측소와의 수복 필요성과의 관계를 조사하는 것이다. 실험군은 맹출 중일 때 협측 소와에 한정된 수복이 필요한 병소가 관찰되었던 35개의 하악 제1대구치를 대상으로 하였고, 대조군은 맹출 후 건전했던 하악 제1대구치 64개를 포함하였다. 실험군은 대조군에 비하여 맹출 전 파노라마 방사선 사진에서 측정된 협측 소와의 크기가 통계적으로 유의하게 컸다. 실험군 내에서 성별, 나이, 치아형성단계, 수복 방법에 따른 협측 소와 크기의 유의한 차이는 없었다. Receiver operating characteristic 커브를 그렸을 때, 커브 아래 면적이 $0.813{\pm}0.047$으로 방사선 사진 상의 협측 소와 크기를 근거로 수복 필요성을 예측했을 때 중등도의 정확성을 보였다. 파노라마 방사선 사진에서 맹출 전 하악 제1대구치의 협측 소와 부위에서 방사선 투과상이 관찰되는 경우 임상적으로 PEIR을 의심하고 주기적인 관찰과 맹출 후 검사가 필요할 수 있다.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.79-92
• /
• 2000

The purpose of this study was to estimate the morphology and the size of permanent maxillary molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study. The subjects were taken impression to make study model. On the study model, authour three times measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. In the maxilary first molar's clinical crown height, mesiolingual cusp height was 6.34mm, mesiobuccal cusp height was 6.05mm, distobuccal cusp height was 5.20mm. And in the maxillary second molar's clinical crown height, mesiobuccal cusp height was 5.85mm, mesiolingual cusp height was 5.71mm, distobuccal cusp height was 5.51mm, distolingual cusp height was 3.53mm. This result considered that the maxillary first molar inclined to distobuccal, and the maxillary second molar more upright than the maxillary first molar. 2. In the width of clinical crown, the maxillary first molar was 10.43mm, the maxillary second molar was 10.20mm, and the difference between the first molar's width and the second molar's width was 0.23mm. 3. The crown thickness was measured divided into mesial buccolingual half and distal buccolingual half. The mesial buccolingual half was 11.14mm, and distal buccolingual half was 10.35mm in the maxillary first molar, and in the maxilary second molar, mesial buccolingual half was 11.25mm, and distal buccolingual half was 9.72mm. This result considered that height of convergency located in mesial half of crown. 4. In the buccal groove length, total length and ratio, the maxillary first molar was 52.5%, the maxillary second molar was 50%. And the development of buccal groove in the maxillary first molar was 59% in case of the well developed buccal groove and 41% in case of the weak developed one. And frequency of buccal pit of the maxillary first molar was 12.5%. Whereas, the frequency of buccal of the well developed buccal groove in the maxillary second molar was 37% and that of the weak developed one was 63%. And frequency of buccal pit of the maxillary second molar was not seen. 5. The 3 cusp type tooth cannot be found in the maxillary first molar and the frequency of 3 cusp type tooth in the maxillary second molar was as small as 6% 6. In the case of 4 cusp type tooth, the size of distal lingual cusp molar was difference between in the maxillary first molar and in the maxillary second molar by about 1mm. 7. The intercuspal distance was similar in the maxillary first premolar and second molar. And intercuspal distanc of mesial half of the maxillary first molar and the maxillary second molar was silmillar, too. 8. The an measurement of occlusal surface in 4 cusp type tooth showed that the angle of occlusal surface between the distobuccal and mesiolingual was an obtuse angle, and the angle of occlusal surface between mesiobuccal and distolingual was an acute angle in the both cases of maxillary first and second molar. 9. The measurements of the development of Carabelli cusp showed that the frequency of the well developed one was 7% and that of the weak developed one was 56% in the maxillary first molar. And there cannot be found the well developed one and can be found 2.5% only in the case of the weak developed one in the maxillary second molar. 10. The well developed oblique ridge in the maxillary first molar showed the 100% frequency and that in the maxillary second molar showed the 85.5% frequency. The frequency of mesiomarginal ridge tubercle in the maxillary first molar was 82% and that in the maxillary second molar was 30.5%. And the frequency of distal accessory tubercle in the maxillary first molar can be seen about 19% and that in the maxillary second molar can be seen about 12%.

• 대한치과기공학회지
• /
• 제36권3호
• /
• pp.205-217
• /
• 2014

Purpose: This study will examine the differences among the college dental morphology textbooks in light of their contents and learning objectives through which we will propose an optimal way of consolidating those differences found. Methods: Five college textbooks adopted in the dental related departments were selected by random and the overview and subdivisions of contents were compared and closely analysed with regards to the learning objectives. Results: Firstly, all of the dental morphology textbooks cover the learning objectives of the dental morphology subject, especially in the area of the overview of dental morphology, the permanent tooth, deciduous tooth. Only the dentistry textbooks explain the learning objective of the occlusion. Secondly, differences in content were found in the area of component tissue and around tissue, dental formula of deciduous teeth, spinous process, buccal pit, enamel projection, curve symbol, tip of cusp position of proximal surface of permanent mandibular canines, buccal cusp position of permanent mandibular second premolars. Conclusion: It is imperative to delineate some meaningful and critical differences in contents among the dental morphology textbooks and reflect this to each and every textbook to be published as a supplementary information guide or index.

• 대한치과보철학회지
• /
• 제37권2호
• /
• pp.242-255
• /
• 1999

The purpose of this study was to estimate the morphology and the size of permanent mandibular molar in Korean Adult. The 100 dental college students with a normal dentition and without any dental prosthesis and severe caries were selected for this study The subjects were taken impression to make study model. On the study model, the 5 dentists measured those sizes and estimated morphological structures with a calipers, a Boley gauge and a protractor. The results were as follows; 1. The clinical crown height, width, thickness and the other anatomical structures had symmetrical relationship between the left and right mandibular molar. 2. In the clinical crown height aspect, the buccal crown heights always were higher than the lingual crown height. The heights of the each surface, the buccal or lingual surface, were gradually decreased from the 1st molar to the 2nd molar and the difference on the buccal surface was higher than that on the lingual surface. 3. In the clinical crown width aspect, the mesiodistal measurement of the mandibular 1st molar was higher than that of the mandibular 2st molar. 4. In the clinical crown thickness aspect, the mesial buccolingual measurement was highest on the mandibular 1st molar and the distal buccolingual distance was lowest on the mandibular 2nd molar. This distal thickness of the mandibular molar always was higher than that of the mesial half. 5. The well-developed mesiobuccal groove of the 1st molar was observed more often than that of the 2nd molar. The buccal pit was also observed more frequently at the 1st molar, but the frequency(35%) was not high. 6. The occlusal type according to the number of cusp was almost 5-cusp(98%) in the 1st molar and was also 5-cusp(63%) in the 2nd molar. The frequency of the 6th cusp was 31% in the 1st molar and was 22% in the 2nd molar. The frequency of the 7th cusp was below 2of in the both teeth. 7. In the buccolingual intercuspal distance aspect of the mesial and distal half, the intercuspal distance of distal half was higher than that of the mesial half on the 1st and 2nd molar, but the difference on the 1st molar was higher than that on the 2nd molar. 8. The difference between the widths of the buccal and lingual half was 1.5mm in the 1st molar and 0.8mm in the 2nd molar. Therefore the lingual convergency of the occlusal surface was more higher in the 1st molar. 9. On the mandibular 1st and 2nd molar, the distobuccal external angle was more acute than the mesiobuccal external angle. But the mesiobuccal internal angle was more acute than the distobuccal internal angle. 10. When the mandibular molar was a 5-cusp type, the development of the distal cusp on the 1st molar was better than that on the 2nd molar. The difference between the cusps was around 0.4mm.

• International Journal of Clinical Preventive Dentistry
• /
• 제14권4호
• /
• pp.209-215
• /
• 2018

In recent years, the numbers of the orthodontic dental patients have been rapidly increased in adolescent or young adult aged generation. It has been well known that it would be very hard to control the oral hygiene cares for orthodontic applied dental patient because of the complexity of the appliance. So the caries prevalence of the orthodontic dental patients would be higher than non-appliance persons, and it might be easy to cause the dental caries especially on the labial or buccal surface of the tooth through equipping the fixed type appliance with a long period, even though the alignment of the teeth would be arranged well. So, the massive preventive program for preventive dentistry should be needed for the dental patients for orthodontic treatment, in order to protect the dental caries and the periodontal disease for them. But, lots of the dentists or dental hygienists sometimes neglect of this point for preventive dental cares orthodontic dental patients, or do not know the importance and how to manage the skill for the preventive dental works in clinical. In this article, it will be introduced the basic theories and skills for preventive cares as tooth-brushing instruction, fluoride topical application and pit and fissure sealant, scaling and professional mechanical tooth cleansing and the diet control, for the dental patients with the fixed type of the orthodontic appliance, in case by case.

• 한국콘텐츠학회논문지
• /
• 제10권7호
• /
• pp.285-296
• /
• 2010

이 연구는 상악 대구치 임상치관의 형태 및 크기를 계측하기 위해 건강한 영구치열을 갖는 C보건대학생 100명을 대상으로 다음과 같은 결론을 얻었다. 1. 임상치관의 교두높이, 치관폭, 치관두께는 좌우 대칭관계를 보였다. 2. 협면구의 강한 발육은 우측 제1대구치에서 우세함을 보였고, 협면소와는 우측 제1대구치에서 높은 출현률을 보였다. 3. 4교두형은 좌 우측 제1대구치에서 100%, 좌 우측 제2대구치에서 각각 78%, 75%로 나타났다. 4. 4교두형일때 원심설측교두 크기는 좌, 우 대칭관계를 보였다. 5. 교두정간 거리는 좌 우측 제1,2대구치 모두 근심 교두정간 거리가 컸다. 6. 카라벨리 교두의 발달은, 좌 우측 모두 제1대구치에서 높은 발육을 보였다. 7. 사주융선의 출현률은 우측 제1대구치에서 87.0%, 우측 제 2대구치에서는 73.0%의 출현율을 보였고, 좌측 제1대구치에서는 88.0%, 좌측 제2대구치에서는 73.0%로 이는 제1대구치에서 약한 치관우식증을 가지고 있는 사람 때문인것으로 사료되었다. 8. 근심변연융선결절 출현율은 좌 우측 모두 제1대구치에서 높은 출현율을 보였다. 원심부 결절은 우측 제1대구치에서 16.0%, 우측 제 2대구치에서 26.0%였고, 좌측 제1대구치에서 14.0%, 좌측 제2대구치에서 21.0%의 출현율을 보였다.

• 보건의료산업학회지
• /
• 제4권2호
• /
• pp.63-72
• /
• 2010

The present study purposed to prevent oral diseases and to improve oral health in children. For this purpose, we selected 70 cases who are 5~7 years old preschoolers at the kindergarten affiliated to G College in Gyeongsangbukdo, and analyzed the general patterns of oral care and the relation of the patterns with dental plaque and deciduous dental caries in the children. Specifically, we conducted oral examination and applied pit and fissure sealant according to the eruption of deciduous molar and first molar. In addition, we executed the 1st and 2nd tooth brushing instruction (TBI), and surveyed S-OHI and PHP twice. Excluding 14 preschoolers who did not appear in the 2nd survey, we performed the study with 56 preschoolers and drew conclusions as follows. 1. The number of decayed or missed or filled teeth among deciduous teeth was 3 or more in 42.9% of female children, and 46.4% of male children, so male children showed a slightly higher rate. 2. The degree of dental plaque formation was $1.64{\pm}1.22$ among the surveyed children. 3. The oral health index was lower after TBI than before in all the children (P<.001). 4. Change in the oral health index was particularly larger in 7 year old female children (p<.005). 5. The patient hygiene performance index was lower after TBI than before in both the buccal surface and lingual surface of the children (p<.005). 6. The patient hygiene performance index was lower after TBI than before in all of male children's teeth except the right maxillary first deciduous molar (p<.001).

• Anatomy and Cell Biology
• /
• 제51권4호
• /
• pp.251-259
• /
• 2018

The aim of this study is to examine the correlation between tooth wear and age by quantitatively measuring maxillary first molar wear in children. A total of 150 maxillary dental models were analyzed in 30 subjects (male, 11; female, 19) with an age range of 6-14 years. Maxillary first molar wear were assessed based on area, volume and the shortest distance from the buccal occlusal plane to the central pit point (BCPH). The area and volume of the tooth cusps were measured at four different offset-plane heights (0.2, 0.4, 0.6, and 0.8 mm). Relationship between age and the amount of wear or BCPH were statistically analyzed. Correlation and regression analyses were also performed, and age estimation was obtained with linear regression analysis. Repeated measures analysis of variance (ANOVA) revealed significant differences between age and the amount of wear based on area, volume, and offset-plane height. Except age of 8 and 10, 12 and 14's 0.2-mm offset-plane-measured volume, all area and volume measurement of all ages and offset-plane height showed a significant amount of increase. Wear speeds were calculated using the BCPH. Among age and measurement variables, the correlation coefficient was strongest when the volume was measured from the 0.4-mm offset-plane. As age increases, the amount of wear, as quantified by area and volume measurements, also increases. According to this study, a regression equation that can be used for age estimation is follows: Age $(y)=0.16{\times}0.4V+0.85$ ($R^2=0.490$) using volume.

• 구강회복응용과학지
• /
• 제26권2호
• /
• pp.179-195
• /
• 2010

임플란트 보철물에 저작력 등 외부 하중이 작용하면 내부 반응으로 응력이 발생되는데 지지골에 나타난 응력은 골재생 및 흡수 파괴, 임플란트에 나타난 응력은 임플란트 자체의 파절이나 나사의 풀림현상 및 파절, 상부 구조물에 나타난 응력은 보철물의 파절 등을 예견하는 지침이 될 수 있을 것이다. 지대주의 형상과 재질에 따라 연결방법과 보철방법이 달라지고 임플란트 내부의 하중전달 기전이 변하게 되고 이에 따라 악골에 발생하는 응력분포 역시 달라질 수 있다. 본 연구에서는 하악 제 1대구치 부위에 이중나사 구조를 갖고 원추형 내측연결 임플란트 시스템인 GSII$^{(R)}$ (Osstem, Korea)임플란트를 이용해 지대주의 종류를 티타늄 소재의 2-piece Transfer$^{TM}$ abutment (GST), 금합금 소재의 2-piece GoldCast$^{TM}$ abutment(GSG), 외부 연결형태를 가진 3-piece Convertible$^{TM}$ abutment (GSC) 로 분류하여 이에 따른 응력분포 양상을 비교 분석하여 보았다. 결과 하중조건에 관계없이 응력은 주로 지대주와 고정체가 접촉하는 경부에 집중되었다. 또한 하중조건에 관계없이 임플란트의 고정체 상부와 접촉하는 치밀골에 높은 응력이 나타나고 해면골에는 아주 작은 응력이 나타났다. 축하중보다는 중심축을 벗어난 하중조건에서 더 높은 응력이 발생되었고 수직하중보다 경사하중에서 더 높은 응력이 발생되었다. 전체에 걸친 최대응력은 GSG에서는 지대주, 치관 및 고정체에 고르게 분포되었고 GST는 주로 고정체와 지대주 나사에, GSC는 고정체와 지대주에 집중되었다. 세 지대주 간 골내의 최대응력에는 유의한 차이가 없었고 GSG가 전체 구성부의 응력분포에 있어 유리한 것으로 나타났다.