• ETRI Journal
• /
• 제30권1호
• /
• pp.170-172
• /
• 2008

A substitution box (S-box) plays a central role in cryptographic algorithms. In this paper, an efficient method for designing S-boxes based on chaotic maps is proposed. The proposed method is based on the mixing property of piecewise linear chaotic maps. The S-box so constructed has very low differential and linear approximation probabilities. The proposed S-box is more secure against differential and linear cryptanalysis compared to recently proposed chaotic S-boxes.

• Steel and Composite Structures
• /
• 제7권6호
• /
• pp.441-456
• /
• 2007

In literature for thin-walled sections with L, [, +, I, and ${\Box}$- shapes the approximate torsion equations for stiffness are used which were proposed by Bach (Hsu 1984), p.30. New formulae for torsional stiffness of bars with L, [, +, I, and ${\Box}$ cross section valid not only for thin-walled sections are presented in this paper. These formulae are obtained by appropriate polynomial approximation of stiffness results obtained by means of method of fundamental solutions. On the base of obtained results the validity of Bach's formulae are verified when cross section is not thin-walled.

• ETRI Journal
• /
• 제42권4호
• /
• pp.619-632
• /
• 2020

Highly dispersive S-boxes are desirable in cryptosystems as nonlinear confusion sublayers for resisting modern attacks. For a near optimal cryptosystem resistant to modern cryptanalysis, a highly nonlinear and low differential probability (DP) value is required. We propose a method based on a piecewise linear chaotic map (PWLCM) with optimization conditions. Thus, the linear propagation of information in a cryptosystem appearing as a high DP during differential cryptanalysis of an S-box is minimized. While mapping from the chaotic trajectory to integer domain, a randomness test is performed that justifies the nonlinear behavior of the highly dispersive and nonlinear chaotic S-box. The proposed scheme is vetted using well-established cryptographic performance criteria. The proposed S-box meets the cryptographic performance criteria and further minimizes the differential propagation justified by the low DP value. The suitability of the proposed S-box is also tested using an image encryption algorithm. Results show that the proposed S-box as a confusion component entails a high level of security and improves resistance against all known attacks.

• Communications for Statistical Applications and Methods
• /
• 제7권1호
• /
• pp.55-64
• /
• 2000

We propose a criterion for testing homogeneity of matrix intraclass covariance matrices of K multivariate normal populations, It is based on a variable transformation intended to propose and develop a likelihood ratio criterion that makes use of properties of eigen structures of the matrix intraclass covariance matrices. The criterion then leads to a simple test that uses an asymptotic distribution obtained from Box's (1949) theorem for the general asymptotic expansion of random variables.

• Communications for Statistical Applications and Methods
• /
• 제6권3호
• /
• pp.929-938
• /
• 1999

We propose a criterion for testing homogeneity of diagonal covariance matrices of K multivariate normal populations. It is based on a factorization of usual likelihood ratio intended to propose and develop a criterion that makes use of properties of structures of the diagonal convariance matrices. The criterion then leads to a simple test as well as to an accurate asymptotic distribution of the test statistic via general result by Box (1949).

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제12권4호
• /
• pp.249-260
• /
• 2008

In this work we propose a mixed finite volume method for the Signorini problem which are based on the idea of Keller's finite volume box method. The triangulation may consist of both triangles and quadrilaterals. We choose the first-order nonconforming space for the scalar approximation and the lowest-order Raviart-Thomas vector space for the vector approximation. It will be shown that our mixed finite volume method is equivalent to the standard nonconforming finite element method for the scalar variable with a slightly modified right-hand side, which are crucially used in a priori error analysis.

• Journal of the Korean Statistical Society
• /
• 제25권1호
• /
• pp.81-94
• /
• 1996

This paper suggests a new criterion for testing the general linear hypothesis about coefficients in multivariate growth curve model. It is developed from a Bayesian point of view using the highest posterior density region methodology. Likelihood ratio test criterion(LRTC) by Khatri(1966) results as an approximate special case. It is shown that under the simple case of vague prior distribution for the multivariate normal parameters a LRTC-like criterion results; but the degrees of freedom are lower, so the suggested test criterion yields more conservative test than is warranted by the classical LRTC, a result analogous to that of Berger and Sellke(1987). Moreover, more general(non-vague) prior distributions will generate a richer class of tests than were previously available.

• Journal of the Korean Statistical Society
• /
• 제26권1호
• /
• pp.131-146
• /
• 1997

In this paper the problem of measuring the stochastic dependence among sets fo random variates is considered, and attention is specifically directed to forming a single well-defined measure of the dependence among sets of normal variates. A new information theoretic measure of the dependence called dependence index (DI) is introduced and its several properties are studied. The development of DI is based on the generalization and normalization of the mutual information introduced by Kullback(1968). For data analysis, minimum cross entropy estimator of DI is suggested, and its asymptotic distribution is obtained for testing the existence of the dependence. Monte Carlo simulations demonstrate the performance of the estimator, and show that is is useful not only for evaluation of the dependence, but also for independent model testing.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.277-280
• /
• 2005

A shape optimization is applied to achieve a design objective in three-dimensional forging processes. In multi-stage forging processes, among the important design aspects, the die shape fur preforming is regarded as the design variable since it influences the forged part relatively higher than the others. The rigid-plastic finite element method and the sensitivity method are employed and formulated to solve a formulated optimization problem. An approximation scheme is also used for the direction search during the optimization. The upset forging of a square box is selected as a test example in order to demonstrate and verify the optimization process of this study. After the optimization, the optimized shape of the die yields a finial product of desire shape.

• 수산해양기술연구
• /
• 제35권1호
• /
• pp.54-59
• /
• 1999

High-speed electronic digital computers have enabled engineers to employ various numerical discretization techniques for solutions of complex problems. The Finite Element Method is one of the such technique. The Finite Element Method is one of the numerical analysis based on the concepts of fundamental mathematical approximation. Three dimensional plate structures used often in partition of ship, box girder and frame are analyzed by Finite Element Method. In design of structures, the static deflections, stress concentrations and dynamic deflections must be considered. However, these problem belong to geometrically nonlinear mechanical structure analysis. The analysis of each element is independent, but coupling occurs in assembly process of elements. So, to overcome such a difficulty the shell theory which includes transformation matrix and a fictitious rotational stiffness is taken into account. Also, the Mindlin's theory which is considered the effect of shear deformation is used. The Mindlin's theory is based on assumption that the normal to the midsurface before deformation is "not necessarily normal to the midsurface after deformation", and is more powerful than Kirchoff's theory in thick plate analysis. To ensure that a small number of element can represent a relatively complex form of the type which is liable to occur in real, rather than in academic problem, eight-node quadratic isoparametric elements are used. are used.