• Restorative Dentistry and Endodontics
• /
• v.48 no.2
• /
• pp.21.1-21.15
• /
• 2023

Objectives: This study evaluated the effects of Biodentine (BD), Bio-C Repair (BCR), and mineral trioxide aggregate (MTA) plug on the fracture resistance of simulated immature teeth with replacement root resorption (RRR) and in vitro-induced osteoclastogenesis. Materials and Methods: Sixty bovine incisors simulating immature teeth and RRR were divided into 5 groups: BD and BCR groups, with samples completely filled with the respective materials; MTA group, which utilized a 3-mm apical MTA plug; RRR group, which received no root canal filling; and normal periodontal ligament (PL) group, which had no RRR and no root canal filling. All the teeth underwent cycling loading, and compression strength testing was performed using a universal testing machine. RAW 264.7 macrophages were treated with 1:16 extracts of BD, BCR, and MTA containing receptor activator of nuclear factor-kappa B ligand (RANKL) for 5 days. RANKL-induced osteoclast differentiation was assessed by staining with tartrate-resistant acid phosphatase. The fracture load and osteoclast number were analyzed using 1-way ANOVA and Tukey's test (α = 0.05). Results: No significant difference in fracture resistance was observed among the groups (p > 0.05). All materials similarly inhibited osteoclastogenesis (p > 0.05), except for BCR, which led to a lower percentage of osteoclasts than did MTA (p < 0.0001). Conclusions: The treatment options for non-vital immature teeth with RRR did not strengthen the teeth and promoted a similar resistance to fractures in all cases. BD, MTA, and BCR showed inhibitory effects on osteoclast differentiation, with BCR yielding improved results compared to the other materials.

• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.408-415
• /
• 1999

When a zinc-oxide eugenol type sealer was placed in root canals treated previously with calcium hydroxide, acceleration of its setting and the yellowish discoloration were observed clinically. The purpose of this study was to evaluate the properties of calcium hydroxide-eugenol compound. Some physical properties of calcium hydroxide-eugenol compound were compared with a manufactured zinc-oxide eugenol based root canal sealer, Tubli-seal$^{(R)}$ in terms of water solubility, water sorption, film thickness and microleakage. Solubility and water sorption were determined by the use of the method described in American Dental Association Specification(ADAS) no. 57. Ten samples of each material were prepared into disks 20mm in diameter and 1.5mm in thickness. The samples were immersed in 50ml of distilled water at $37{\pm}1^{\circ}C$ for 7 days. The samples were then removed and placed in a desiccator. The values for solubility and water sorption were calculated using differences between the weights of same sample. Film thickness was determined by the use of the method described in ADAS no. 57 too. A small quantity of mixed cement was placed between two glass plates of which thickness was measured previously. 15Kg loading was applied and total thickness of the glass plates and the cement film was measured. The thickness difference was recorded as the material's film thickness. Microleakage was determined with a dye penetration method. Experimental materials were placed between the dentin surface of bovine tooth and the acrylic rod. These units were immersed in Pelican ink (W-Germany) for three days. Dye-penetrated dentin surfaces of bovine tooth were measured using the NIB Image 1.60 Macintosh program. The results are as follows: 1. Water solubility value of calcium hydroxide-eugenol compound (20.98${\pm}$2.94%) was statistically higher than those of Tubli-seal$^{(R)}$(2.52${\pm}$0.49%)(p<0.05). 2. Water sorption value of calcium hydroxide-eugenol compound (59.72${\pm}$17.75%) was statistically higher than those of Tubli-seal$^{(R)}$(3.15${\pm}$0.76%)(p<0.05). 3. Film thickness value of calcium hydroxide-eugenol compound (0.36${\pm}$0.03mm) was statistically higher than those of Tubli-seal$^{(R)}$(0.12${\pm}$0.1mm)(p<0.05). 4. Dye penetration value after 3 days-immersion of calcium hydroxide-eugenol compound(57.63${\pm}$25.85%) was statistically higher than those of Tubli-seal$^{(R)}$(28.05${\pm}$23.46%)(p<0.05).

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.42 no.2
• /
• pp.90-98
• /
• 2016

Objectives: The aim of this study was to compare the osteogenic effects of demineralized dentin matrix (DDM) combined with recombinant human bone morphogenetic protein-2 (rhBMP-2) in rabbit calvarial defects with DDM and anorganic bovine bone (ABB) combined with rhBMP-2. Materials and Methods: Four round defects with 8-mm diameters were created in each rabbit calvaria. Each defect was treated with one of the following: 1) DDM, 2) ABB/rhBMP-2, or 3) DDM/rhBMP-2. The rhBMP-2 was combined with DDM and ABB according to a stepwise dry and dip lyophilizing protocol. Histological and microcomputed tomography (${\mu}CT$) analyses were performed to measure the amount of bone formation and bone volume after 2- and 8-week healing intervals. Results: Upon histological observation at two weeks, the DDM and ABB/rhBMP-2 groups showed osteoconductive bone formation, while the DDM/rhBMP-2 group showed osteoconductive and osteoinductive bone formation. New bone formation was higher in DDM/rhBMP-2, DDM and ABB decreasing order. The amounts of bone formation were very similar at two weeks; however, at eight weeks, the DDM/rhBMP-2 group showed a twofold greater amount of bone formation compared to the DDM and ABB/rhBMP-2 groups. The ${\mu}CT$ analysis showed markedly increased bone volume in the DDM/rhBMP-2 group at eight weeks compared with that of the DDM group. Notably, there was a slight decrease in bone volume in the ABB/rhBMP-2 group at eight weeks. There were no significant differences among the DDM, ABB/rhBMP-2, and DDM/rhBMP-2 groups at two or eight weeks. Conclusion: Within the limitations of this study, DDM appears to be a suitable carrier for rhBMP-2 in orthotopic sites.

• Journal of dental hygiene science
• /
• v.16 no.4
• /
• pp.257-262
• /
• 2016

The purpose of this study was to assess the correlation between integrated mineral loss (volume % mineral${\times}{\mu}m$, ${\Delta}Z_{TMR}$) determined using transverse microradiography (TMR) and integrated reflectivity ($dB{\times}{\mu}m$, ${\Delta}R_{OCT}$) determined using optical coherence tomography (OCT) for detecting early dental caries with lesion depth more than $200{\mu}m$. Sixty tooth specimens were made from sound bovine teeth. They were immersed in a demineralized solution for 20, 30, and 40 days. The ${\Delta}R_{OCT}$ was obtained from the cross-sectional OCT image. The ${\Delta}Z_{TMR}$ was obtained from the TMR image. The correlation between ${\Delta}R_{OCT}$ and ${\Delta}Z_{TMR}$ was examined using Pearson correlation. The Bland-Altman plot was constructed using the ${\Delta}R_{OCT}$ and ${\Delta}Z_{TMR}$ values. A significant correlation between ${\Delta}R_{OCT}$ and ${\Delta}Z_{TMR}$ was confirmed (r=0.491, p=0.003). Moreover, most of the difference between ${\Delta}R_{OCT}$ and ${\Delta}Z_{TMR}$ was included in the error section of the Bland-Altman plot. Therefore, OCT could be used as a substitute for TMR when analyzing mineral loss in early dental caries.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.4
• /
• pp.613-622
• /
• 2007

The purpose of this study was to evaluate the effect of fluoride varnish on prevention of enamel demineralization. Eighty bovine enamel blocks were divided randomly into 4 groups of 20 specimens: Group I served as the control with no topical application of fluoride. Group II was treated with APF gel for 4 minutes. Group III was treated with Fluor $Protector^{(R)}$. Group IVV was treated with $CavityShield^{TM}$. After 24 hours of treatment, samples were brushed with a soft bristled tooth brush to stimulate normal mechanical wear of varnish. Early caries lesions were produced by placing each specimen into demineralization solution at pH 4.0 for 48 hours. Then the optical density of the lesions was measured by light fluorescence induced by plasma light and the surface microhardness were measured by the vicker's hardness test. The results were as follows: 1. The optical densities of group III, IV were significantly higher than that of group II, but no significant difference was noted between group III and IV. 2. The surface microhardness of group IV was the highest, followed by group III, II, and I(p<0.05). 3. There were no significant differences between group III and IV in optical density. However, the surface microhardness of group IV was significantly higher than that of group III. The results of present study indicate that the fluoride varnish is more effective than APF gel for prevention of dental caries.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.1
• /
• pp.45-53
• /
• 2001

Recently some studies have shown that low light intensity followed by final cure at high light intensity may result in a smaller marginal gap and may be no negative effect on material properties. The purpose of this study was to evaluate the influence of the initial cure with low intensity on the shear bond strength of dentin and the microhardness of composite resin. Twenty intact bovine teeth were prepared for shear bond strength test and each tooth sectioned to three specimens. The specimens were randomly divided into three groups according to the light intensity and curing time as follows; Group I. $450mmW/cm^2$ 40sec Group II. $300mmW/cm^2$ 20sec and $600mmW/cm^2$ 20sec Gropu III. $250mmW/cm^2$ 20sec and $450mmW/cm^2$ 20sec. Samples of each group were restored with light-cured composite resin after dentin bonding and then the shear bond strength of each specimen were measured using universal testing machine. Ten resin specimens per group were prepared. After 24 hours, the Vickers microhardness value was measured at the top and bottom surfaces. The result are as follows; 1. Mean value of low initial intensity groups(II, III) were higher than the control group(I) in shear bond strength, but no significant difference could be found. 2. No significant difference could be found between three groups in microhardness.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.83-91
• /
• 2008

Dental caries which is one of the most common chronic disease complexly developed by the action of oral bacteria, diet, and host factor. Various prevention program enhance resistance of demineralization and reduce the acidogenecity of oral bacteria have been introduced, representative material is fluoride and chlorhexidine. The purpose of the study was to evaluate and compare effectiveness of fluoride varnish and chlorhexidine varnish in vivo. Bovine tooth specimens were implanted in the lower space maintainers and applied with fluoride varnish and chlorhexidine varnish. After seven days in oral environment, metal mesh was covered to make similar condition of plaque accumulation and induce caries. All specimens were analysed by EPMA to evaluate quantitative change of Ca, P and by polarized microscope to identify histological changes. The results were as follows : After initial artificial caries induction in the mouth, there were remarkable enamel caries lesion in the control group under polarized light microscopy. The highest amount of mineral decrease were showed in control group. No statistically significant mineral decrease were showed in fluoride varnish group, while chlorhexidine varnish group showed only significant decrease of P(P<0.05). In conclusion both fluoride varnish and chlorhexidine varnish seemed to be effective for protecting enamel surface from caries activity, although fluoride varnish has more anticariogenic effect than chlorhexidine varnish.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.3
• /
• pp.266-276
• /
• 2020

The purpose of this study was to compare the remineralization effect of 38% silver diamine fluoride (SDF) and 5% sodium fluoride (NaF) varnish on artificially induced enamel caries. The present study standardized the physiochemical characteristics of the tooth structure using bovine teeth, realized the wash-off action of agents using a saliva, reproduced an environment similar to mouth through pH-cycling, and comparatively assessed the remineralization effect of 38% SDF and 5% NaF varnish in a non-destructive method using micro-CT. And the remineralized enamel surface structure was analyzed by scanning electron microscopy (SEM) and energy dispersive X-Ray spectroscopy (EDS). In both SDF and NaF varnish, mineral density (△Hounsfield unit value) and the volume of enamel restored to normal mineral density through remineralization gradually increased with time. And the SDF showed a much higher level of increase in mineral density at all depths and remineralized volume than NaF varnish. According to SEM analysis, the surface roughness decreased in the order of artificial saliva, NaF varnish and SDF. In addition, EDS analysis showed that silver ion was precipitated on the enamel surface in SDF group. In conclusion, SDF had a greater remineralization effect than NaF varnish on demineralized enamel.

• Journal of dental hygiene science
• /
• v.15 no.4
• /
• pp.419-423
• /
• 2015

Recently, energy drink consumption is rising. The purpose of this study was to examine the effect of energy drink on enamel erosion by measuring pH and titratable acidity in energy drink on the market. pH and titrable acidity in drink were measured by selecting 3 kinds of energy drinks with high sales volume among energy drinks on the domestic market. To evaluate the erosion level of normal enamel, the erosion level was measured by using a surface micro-hardness after soaking it in drink for 1 minute, for 3 minutes, for 5 minutes, for 10 minutes, and for 30 minutes while using 10 pieces of bovine specimens per each group. All the energy drinks were containing citric acid. As for pH in drinks, pH of Burn intense was the lowest with $2.51{\pm}0.01$. Hotsix stood at $3.16{\pm}0.01$. Redbull stood at $3.37{\pm}0.00$. In pH 5.5, the titrable acidity of Burn intense was 3.59 ml. Redbull was 3.43 ml. Hotsix was 1.92 ml. All the energy drinks were reduced the surface micro-hardness according to a rise in time of immersion. Following the 30-minute treatment in drinks, the surface micro-hardness value was indicated to be the lowest in Redbull with $119.72{\pm}15.16$ VHN. It was shown to be in order of Hotsix $208.75{\pm}10.99$ and Burn intense $210.47{\pm}8.01$. Hotsix and Burn intense had no statistically significant difference (p>0.05). Accordingly, all the energy drinks, which were used in the experiment, caused the tooth enamel erosion. Among them, Redbull led to the largest enamel erosion. Thus, energy drink containing citric acid and low pH can cause the enamel erosion. However, it is thought to be necessarily progressed by considering factors of influencing etching a little more diversely by additionally analyzing intraoral factors, acid kinds, and even the content in calcium, phosphate and fluoride.

• Journal of dental hygiene science
• /
• v.17 no.4
• /
• pp.352-357
• /
• 2017

Consumption of liquid digestive medicine has continually grown in recent years. This present study was designed to evaluate the capability of liquid digestive medicine to erode dental enamel, relating the pH and titratable acidity of liquid digestive medicine. Three commercially available liquid digestive medicines were chosen these were Gashwalmyeungsu, Saengrokchun and Wicheongsu. The liquid digestive medicines were evaluated in respect to pH, titratable acidity and concentrations of calcium and phosphate, respectively. This measure was carried out three times for each digestive medicine and was recorded the data as mean (standard deviation). Bovine enamel specimens measured microhardness at base line and then were randomly assigned to 4 groups of 10 each. The specimens were immersed into each liquid digestive medicine for 1, 3, 5, 10, 15, and 30 minutes and then evaluated each time by VHN. All digestive medicines had a pH of less than 3.7. Wicheongsu had the lowest pH 2.93 and Gashwalmyeungsu had highest pH 3.63. In pH 5.5, titratable acidity of Wicheongsu was 1.27 ml. Gashwalmyeungsu was 0.63 ml. Saengrokchun was 0.60 ml. All liquid digestive medicines showed low concentration of calcium and phosphate. The microhardness of specimens after immersion into liquid digestive medicines was continuously reduced in all digestive medicines. After 30-minute treatment in liquid digestive medicines, Wicheongsu containing low pH and high tiratable acidity was shown to be lowest microhardness value ($207.80{\pm}15.52$). The three liquid digestive medicines caused surface softening of enamel erosion. We conclude that drinks, commonly consumed by functional dyspepsia patient can cause erosion of enamel.