• Composites Research
• /
• v.28 no.5
• /
• pp.270-276
• /
• 2015

Polyvinylidene fluoride (PVDF)-based nanocomposites are fabricated by incorporation of boron nitride (BN) nanosheets with anisotropic orientation for a potential high thermal conducting ferroelectric materials. The PVDF is dissolved in dimethylformamide (DMF) and homogeneously mixed with exfoliated BN nanosheets, which is then cast into a polyimide film under application of high magnetic fields (0.45~10 T), where the direction of the filler alignment was controlled. The BN nanosheets are exfoliated by a mixed way of solvothermal method and ultrasonication prior to incorporation into the PVDF-based polymer suspension. X-ray diffraction, scanning electron microscope and thermal diffusivity are measured for the characterization of the polymer nanocomposites. Analysis shows that BN nanosheets are exfoliated into the fewer layers, whose basal planes are oriented either perpendicular or parallel to the composite surfaces without necessitating the surface modification induced by high magnetic fields. Moreover, the nanocomposites show a dramatic thermal diffusivity enhancement of 1056% by BN nanosheets with perpendicular orientation in comparison with the pristine PVDF at 10 vol % of BN, which relies on the degree of filler orientation. The mechanism for the magnetic field-induced orientation of BN and enhancement of thermal property of PVDF-based composites by the BN assembly are elucidated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.2
• /
• pp.98-102
• /
• 2012

Increasing the fuel economy has been an inevitable issue for the development of new cars, and one of the important measures to improve the fuel economy is to decrease the vehicle weight. In order to obtain this goal, the researches about lighter, stronger and the well impact absorbing bumper impact beam have been studied without sacrificing bumper safety. In this study, the overall weight reduction possibility of rear bumper impact beam could be examined based on the variation of frontal, offset and corner impact crash capability by substituting a ultra high strength steel material (boron steel ) having tensile strength of 1.5 GPa grade instead of conventional steels. In addition, the section variations (open section, closed section, open section with 5 stays) of the bumper impact beam structure were examined carefully. It could be reached that this analysis could be well established and be contributed for design guide and the optimum design conditions of the automotive rear bumper impact beam development.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.630-630
• /
• 2013

Recently, atomically smooth hexagonal boron nitride(h-BN) known as a white graphene has drawn great attention since the discovery of graphene. h-BN is a III-V compound and has a honeycomb structure very similar to graphene with smaller lattice mismatch. Because of strong covalent sp2bonds like graphene, h-BN provides a high thermal conductivity and mechanical strength as well as chemical stability of h-BN superior to graphene. While graphene has a high electrical conductivity, h-BN has a highly dielectric property as an insulator with optical band gap up to 6eV. Similar to the graphene, h-BN can be applied to a variety of field, such as gate dielectric layers/substrate, ultraviolet emitter, transparent membrane, and protective coatings. However, up until recently, obtaining and controlling good quality monolayer h-BN layers have been too difficult and challenging. In this work, we investigate the controlled synthesis of h-BN layers according to the growth condition, time, temperature, and gas partial pressure. h-BN is obtained by using chemical vapor deposition on Cu foil with ammonia borane (BH3NH3) as a source for h-BN. Scanning Transmission Electron Microscopy (STEM, JEOL-JEM-ARM200F) is used for imaging and structural analysis of h-BN layer. Sample's surface morphology is characterized by Field emission scanning electron microscopy (SEM, JEOL JSM-7100F). h-BN is analyzed by Raman spectroscopy (HORIBA, ARAMIS) and its topographic variations by Atomic force microscopy (AFM, Park Systems XE-100).

• Computers and Concrete
• /
• v.27 no.2
• /
• pp.111-130
• /
• 2021

In the present work, an extensive study for predicting efficiency parameters (��i) of various simulated nanocomposites including Polymethyl methacrylate (PMMA) as matrix and different structures including various sizes of graphene platelets (GPLs), single, double, and multi-walled carbon nanotubes (SWCNTs-DWCNTs-MWCNTs), and single and double-walled boron nitride nanotubes (SWBNNTs-DWBNNTs) are investigated. It should be stated that GPLs, carbon and boron nitride nanotubes (CNTs, BNNT) with different chiralities (5, 0), (5, 5), (10, 0), and (10, 10) as reinforcements are considered. In this research, molecular dynamics (MDs) method with Materials studio software is applied to examine the mechanical properties (Young's modulus) of simulated nanocomposite boxes and calculate η1 of each nanocomposite boxes. Then, it is noteworthy that by changing length (6.252, 10.584, and 21.173 nm) and width (7.137, 10.515, and 19.936) of GPLs, ��1, ��2, and ��3 approximately becomes (0.101, 0.114, and 0.124), (1.15, 1.22, and 1.26), (1.04, 1.05, and 1.07) respectively. After that efficiency parameters of SWCNTs, DWCNTs, and MWCNTs are calculated and discussed separately. Finally efficiency parameters of SWBNNTs and DWBNNTs with different chiralities by PMMA as matrix are determined by MD and discussed separately. It is known that the accurate efficiency parameters helps a lot to calculate the properties of nanocomposite analytically. In particular, the obtained results from this research can be used for analytical work based on the extended rule of mixture (ERM) in bending, buckling and vibration analysis of structure in future study.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.3006-3016
• /
• 2022

In this study, the images of specific prompt gamma (PG)-rays of 719 keV emitted from proton-boron reactions were analyzed using single-photon emission computed tomography (SPECT). Quantitative evaluation of the images verified the detection of anatomical changes in tumors, one of the important factors in daily adaptive proton therapy (DAPT) and verified the possibility of application of the PG-ray images to DAPT. Six scenarios were considered based on various sizes and locations compared to the reference virtual tumor to observe the anatomical alterations in the virtual tumor. Subsequently, PG-rays SPECT images were acquired using the modified ordered subset expectation-maximization algorithm, and these were evaluated using quantitative analysis methods. The results confirmed that the pixel range and location of the highest value of the normalized pixel in the PG-rays SPECT image profile changed according to the size and location of the virtual tumor. Moreover, the alterations in the virtual tumor size and location in the PG-rays SPECT images were similar to the true size and location alterations set in the phantom. Based on the above results, the tumor anatomical alterations in DAPT could be adequately detected and verified through SPECT imaging using the 719 keV PG-rays acquired during treatment.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2153-2162
• /
• 2024

The purpose of this study is to develop a high-energy neutron shielding material applied in proton therapy environment. Composite shielding material consisting of 10.00 wt% boron carbide particles (B₄C), 13.64 wt% surface-modified cross-linked polyethylene (PE), and 76.36 wt% tungsten particles were fabricated by hot-pressure sintering method, where the optimal ratio of the composite is determined by the shielding effect under the neutron field generated in typical proton therapy environment. The results of Differential Scanning Calorimetry measurements (DSC) and tensile experiment show that the composite has good thermal and mechanical properties. In addition, the high energy-neutron shielding performance of the developed material was evaluated using cyclotron proton accelerator with 100 MeV proton. The simulation shows a 99.99% decrease in fast neutron injection after 44 cm shielding, and the experiment result show a 99.70% decrease. Finally, the shielding effect of replacing part of the shielding material of the proton therapy hall with the developed material was simulated, and the results showed that the total neutron injection decreased to 0.99‰ and the neutron dose reduced to 1.10‰ before the enhanced shielding. In summary, the developed material is expected to serve as a shielding enhancement material in the proton therapy environment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.1
• /
• pp.43-50
• /
• 1978

In order to compare the effectiveness of different phosphorus forms (pulverized as regranulized) and formulars (compound fertilizers) of fused phosphate and to compare the effectiveness of boron from different forms (straight borax, granulized with fused phosphate and included in compound fertilizer), a field experiment was conducted on a relatively fertile upland soil using soybean as a test crop. Results are summarized as following. 1. Yield of soybean was significantly higher in the plots fertilized with P when compared to check plot (no p). However, no significant differences were observed among the different forms or formulars of fused phosphate, indicating that the regranulization or formulation of compound fertilizer did not influence the effectiveness of phosphorus. 2. The application of boron, regardless of its formular, brought about higher B content in plant tissue and higher grain yield. There was a tendency that boron contained in ragranulized fused phosphate was more effective than straight borax. The results also indicated that when boron is to be included in NPK compound fertilizer, its content should be at the least 1.5% as $B_2O_3$. 3. The effectiveness of boron appeared as increased number of pod, higher B, and Ca contents in plant and the amounts of uptake of these elements by soybean. 4. The analysis of soil after the experiment indicated that different forms or formulars of fused phosphate were similarly effective in increasing the available P, Ca, and Mg contents in the soil. 5. Slight increase in available B contents in the experimental plot soils applied with boron fertilizer was observed after the trial.

• Journal of Bio-Environment Control
• /
• v.16 no.2
• /
• pp.151-156
• /
• 2007

This work was conducted to investigate the important rooting factors through comparative analysis of a physiological differentiation after layering treatment using four apple rootstocks of different rooting abilities; M.26, M.9, O.3, and Mo.84. Mo.84 showed the highest rooting rate in from rootstocks, while O.3 was the lowest. Mo.84 also found to have the highest indole-3-acetic acid (IAA) content, although the fluctuation of IAA contents was not consistent with layering treatment. In contrast, abscisic acid (ABA) content of Mo.84 which showed highest rooting was lowest among rootstocks regardless of layering treatment. And ABA contents of all rootstocks were decreased after layering treatment than before layering treatment. O.3 which showed poor rooting rate revealed lowest in boron content. Carbohydrate/nitrogen (C/N) ratio of Mo.84 was the highest in all rootstocks. Therefor, we assumed that he IAA contents in layering treated rootstocks were not seemed to be a major rooting factor, but the changes in ABA contents and boron levels limit rooting in dwarf apple rootstocks.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.523-528
• /
• 2015

In this study, we investigated the effects of sulfuric acid on the synthesis of calcium borate in the artificial boron-containing brine (bittern) saturated with calcium hydroxide. For the study, we attempted to synthesize calcium borate under various conditions such as reaction temperature, reaction time, and cooling temperature after heating, and then to examine the recovery and purity of the calcium borate according to the presence or absence of sulfuric acid at each condition. The XRD analysis confirmed that, regardless of the presence of sulfuric acid, the calcium borate ($Ca_2B_2O_5{\cdot}H_2O$) was synthesized, while, in the presence of sulfuric acid, the calcium sulfate ($CaSO_4{\cdot}0.5H_2O$) was produced as a by-product. In all the experiments performed by varying the reaction temperature and time, the recovery and purity of the calcium borate without sulfuric acid were observed higher than those with it. The results indicated that the addition of sulfuric acid increased the solubility of the calcium hydroxide, but the calcium sulfate produced as a by-product could decrease the recovery and purity of the calcium borate by preventing the synthesis. In this study, the artificial boron-containing brine (bittern) (500 mg-B/L) was saturated with calcium hydroxide in the absence of sulfuric acid, and then the solution was heated at $80-105^{\circ}C$ for less than 10 minutes to synthesize the calcium borate. The recovery and purity of calcium borate were measured as high as 80 % and 96 %, respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.2
• /
• pp.61-66
• /
• 2010

A virtual manufacturing system that is composed of JMatPro, a material modeler and $DEFORM^{TM}$-HT, a finite element package is applied to the hot press forming process: high temperature material properties for each phase such as flow stress, elastic modulus, Poisson's ratio, thermal expansion coefficient, in addition to TTT curve are predicted by JMatPro and taken into $DEFORM^{TM}$-HT to predict the material behavior considering phase transformation and heat transfer simultaneously. In order to verify the accuracy of computation, the residual stress and the springback were compared with the experimental measurements. Both the predicted and measured principal residual stresses and amount of springback were in good agreement. It was also found that the residual stresses generated from hot press forming are not negligible as it has been generally assumed, although the springback deformation is quite small.