• Journal of Ocean Engineering and Technology
• /
• v.27 no.5
• /
• pp.99-104
• /
• 2013

Recently, various nanoparticles have been used for filler in polymer matrices. The particles of nano size are whether high or not cross-link density in polymer affects the thermal and mechanical properties of one. The properties change as a result of chemical reactions between the nanoparticles and the surface of the polymer. There are two models for nanocomposites: "repulsive interaction" and "attractive interaction" between the nanoparticles and matrix. In this study, the variation in the curing mechanism was examined when nano-size $TiO_2$ was dispersed into an epoxy (Bisphenol A, YD-128) with different curing agents. The results of this study showed that the exothermic temperature and Tg in the case of the nanoparticles used (Jeffamine) (D-180) at room temperature were reduced by an increase in the $TiO_2$ contents because of the "repulsive interaction" between the nanoparticles and the matrix. The tensile strengths were increased by increasing amounts of $TiO_2$ until 3 wt% because of a dispersion strengthening effect caused by the nanoparticles, because of the repulsive interaction. However, such tensile properties decreased at 5 wt% of $TiO_2$, because the $TiO_2$ was agglomerated in the epoxy. In contrast, in the case of the nanoparticles that used NMA and BDMA, the exothermic temperature and Tg tended to rise with increasing amounts of $TiO_2$ as a result of the "attractive interaction." This was because the same amounts of $TiO_2$ were well dispersed in the epoxy. The tensile strength decreased with an increase in the $TiO_2$ contents. In the general attractive interaction model, however, the cross-link density was higher, and tensile strength tended to increase. Therefore, for the nanoparticles that used NMA, it was difficult to conclude that the result was caused by the "attractive model."

• Journal of dental hygiene science
• /
• v.18 no.6
• /
• pp.367-373
• /
• 2018

The consumption of beverages among children is rising. The purpose of this study was to examine the effect of kid's drink on dental resin-based pit and fissure sealant. Pororo, I-kicker, Sunkist kids were included in the experimental groups, and Samdasu was included in the control group. A conventional dental sealant material ($Clinpro^{TM}Sealant^{(R)}$) was selected for this study. Resin specimens (8 mm in diameter and 1 mm in thickness) were prepared according to manufacturers' instructions and the initial roughness (Ra) was then measured. The pH of all the four groups was measured using a pH meter. The specimens were individually immersed in 5 ml of the experimental solutions and stored at $37^{\circ}C$ for 72 hours. Following this, the surface roughness of the resin specimens was measured by Surftest. The concentration of residual monomer released was determined by high performance liquid chromatography (HPLC). The surface morphology of the resin specimen was evaluated before and after storage by scanning electron microscopy (SEM). Data were statistically analyzed using Kruskal-Wallis and Duncan's test. The results showed that all the children's beverages examined in this study contained citric acid. The pH of I-kicker was the lowest ($3.03{\pm}0.01$), followed by that of Sunkist kids ($3.26{\pm}0.02$) and Pororo ($3.47{\pm}0.02$). We observed an increase in the surface roughness of resin specimens after 72 h of immersion in all the beverages tested (p<0.05). There was matrix degradation after immersion, visualized on SEM image, in all the beverage groups. Bisphenol-A-glycidyl methacrylate was not detected after 72 hours, but triethylene glycol dimethacrylate levels were increased in all the beverages tested during the 72 hours by HPLC. These results suggest that intake of beverages containing acid can cause degradation of the resin-based pit and fissure sealants in children.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.27.1-27.12
• /
• 2023

Background: Environmental exposure is characterized by low concentration, chronic, and complex exposure. Traditional epidemiological studies show limitations in reflecting these characteristics since they usually focus on a single or very limited number of exposure factors at a time. In this study, we adopted the methodology of environment-wide association study (EWAS) to figure out the association of human liver function with various environmentally hazardous substances. Methods: We analyzed 2,961 participants from the Korean National Environmental Health Survey Cycle 4 (2018-2020). Using generalized linear model (GLM) analysis, we analyzed the association of 72 variables with 3 liver function indices (aspartate aminotransferase [AST], alanine aminotransferase [ALT], and gamma glutamyl transferase [GGT]). Finally, we visualized our results with Manhattan plot. Results: In GLM analysis, perfluorooctanesulfonate were positively associated with ALT (odds ratio [OR]: 2.2; 95% confidence interval [CI]: 1.39-3.46; p_adjusted = 0.0147) and perfluorodecanoic acid showed positive association with GGT (OR: 2.73; 95% CI: 1.36-5.5; p_adjusted = 0.0256). Plasma mercury showed positive association with GGT (OR: 1.45; 95% CI: 1.14-1.84; p_adjusted = 0.0315). Using a plastic container while keeping food in the refrigerator was associated with elevated GGT compared to using a glass container (OR: 1.51; 95% CI: 1.16-1.95; p_adjusted = 0.0153). 2-ethyl-5-oxohexyl phthalate, showed a negative trend with all 3 indices, with AST (OR: 0.54; 95% CI: 0.39-0.73; p_adjusted = 0.00357), ALT (OR: 0.5; 95% CI: 0.34-0.75; p_adjusted = 0.036), GGT (OR: 0.55; 95% CI: 0.4-0.76; p_adjusted = 0.00697). Bisphenol S and frequent use of sunblock cream showed negative association with ALT (OR: 0.77; 95% CI: 0.66-0.89), and GGT (OR: 0.25; 95% CI: 0.11-0.55), respectively. Conclusions: We conducted an exploratory study on environmental exposure and human liver function. By using EWAS methodology, we identified 7 factors that could have potential association with liver function.

• Journal of Food Hygiene and Safety
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2005

To investigate whether there are estrogenic and anti-estrogenic activities in various medicinal herbs and discover prominent chemo-preventive agents, we screened and compared the ethanol extracts of 9 plants through the recombinant yeast assay and MCF-7 human breast cancer cell assay, In recombinant yeast assay, seven medicinal herbs showed estrogenicity, and four extracts showed androgenecity. In MCF-7 proliferation assay, the growth of MCF-7 cells was inhibited by eight extracts before and even after co-treatment with bisphenol A. It is interesting that the extracts of Glycyrrhiza uralensis, Cassia tora, Syringa velutina, Zingiber officinale, Malva verticillata, and Panax ginseng C.A. Meyer exhibited inhibitory effects as phytoestrogens in estrogen-responsive human breast cancer cells. This study suggests that some Korean medicinal herbs might be considered as phytoestrogens and be useful to further analyze those plants which contain the estrogenic effect in order to identify the active principles.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.260-268
• /
• 2017

Purpose: Manufacturing with AM (Additive manufacturing) technique has many advantages; but, due to insufficient study in the area, it is not being widely used in the general clinic. In this study, differences of flexural strength among various materials of 3 unit fixed dental prosthesis were analyzed. Materials and Methods: A metal jig for specimens that had a 3-unit-fixed dental prosthesis figure were fabricated. The jigs were made appropriately to the specifications of the specimens. Three different kinds of materials of specimens which were NC (mathacrylic esther based), DP-1 (Bisphenol A epoxy acrylate type oligomer based), and DT-1 (urethane acrylate based) were printed with DLP machine. Five specimens for each kind of material were printed with an angle of $30^{\circ}$ from the horizontal surface. The specimens were placed on the jig and the flexural strength was measured and recorded using Universal testing machine. The recorded data was analyzed in SPSS using One-way ANOVA and Tukey HSD to determine the significance of the differences of flexural strength among the groups. Results: The flexural strengths of each group were the followings: NC, $1119{\pm}305$ N; DP-1, $619{\pm}150$ N; DT-1, $413{\pm}65N$. Using One-way ANOVA and Tukey Honestly Significant Difference test, significant difference was found between NC and the other groups (P < 0.05), but there was no significant difference between DP-1 and DT-1 (P > 0.05). Conclusion: Higher flexural strength was shown in 3-unit-fixed dental prosthesis that were 3D printed using a DLP machine with NC material.

• Composites Research
• /
• v.12 no.4
• /
• pp.71-78
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with diaminodiphenyl methane (DDM), diaminodiphenyl sulphone (DDS) in a stoichiometrically equivalent ratio. From this work, the effect of aromatic amine curing agents. In contrast, the results show that the DGEBA/DDS cure system having the sulfone structure between the benzene rings had higher values in the conversion of epoxide, density, shrinkage (%), glass transition temperature, tensile modulus and strength, flexural modulus and strength than the DGEBA/DDM cure system having methylene structure between the benzene rings, whereas the DGEBA/DDM cure system presented higher values in the maximum exothermic temperature, thermal expansion coefficient, and thermal stability. These results are caused by the relative effects of sulfone group having strong electronegativity and methylene group having (+) repulsive property and stem from the effect of the conversion ratio of epoxide group. The result of fractography shows that the each grain size of the DDM/DGEBA system with feather-like structure is larger than that of the DDS/DGEBA system.

• Journal of Animal Science and Technology
• /
• v.46 no.6
• /
• pp.957-966
• /
• 2004

The objective of this study was to investigate the effects of BPA on reproductive characteristic and blood hematological and chemical values in mice. The male mice were intraperitoneally injected BPA in native control(no treatment), positive control(corn oil, 3$m\ell$/kg B.W), 0.05, 0.5 and 5.0mg BPA/kg B.W and female mice were injected BPA in control(corn oil, 3$m\ell$/kg B.W), 0.05, 0.5 and 5.0mg BPA/kg B.W with 5 times at 3 days interval for 14 days. The administration of BPA in male mice didn't affect the body and reproductive organ weight such as testis, epididymis, vesicular gland and coagulating gland. We found that the 5.0mg BPA group was significantly reduced the sperm concentration and increased the sperm abnormality compared to native, positive control and 0.05mg BPA groups(P<0.05), but any other effects were not found in sperm viability and motility in BPA treatment groups. The RBC, HB, HT, MCV, MCH, MCHC, albumin, BUN and total protein of blood hematological and chemical values in male were not different in all experimental groups(P>0.05). However, the value of WBC was slightly lower in BPA treatment groups than that of control groups and PLT was slightly higher in BPA groups than that of control groups, but not significantly defference among the experimental groups(P>0.05). In female mice, the effects of BPA on body weight didn’t affect in all experimental groups, but ovary weights in 0.5 and 5.0mg BPA groups were significantly increased compared to those in control and 0.05mg BPA group(P<0.05). The uterine weight in BPA groups was slightly higher than that of control group, but not significantly different in all experimental groups(P>0.05). The RBC, Hb, HT, MCV, MCH, MCHC, albumin and total protein of blood hematological and chemical values in female were not different in all experimental groups(P>0.05). The values of WBC and PLT in BPA groups were slightly higher than that of control, but not significantly different among the experimental groups. The concentration of BUN was the higher in BPA groups than that of control group. The histological evaluation of testis, ovary and uterus were not different in all experimental groups.

• Clean Technology
• /
• v.21 no.1
• /
• pp.76-82
• /
• 2015

Volatile organic compounds (VOC) free adhesives have been interested by many scientists and engineers due to environmental regulations and the safety of industrial workers. In this work, a series of composites composed with bisphenol A epoxy resin used as solvent, dicyandiamide, and promoter were prepared to investigate the most appropriate molar ratio for steel-steel adhesion. The cured test specimen of each composite were measured with universal testing machine (UTM) to figure out mechanical properties such as tensile strength, Young’s modulus, and elongation. Furthermore, the lap shear strength of the specimen was tested with UTM while impact resistance was measured with Izod impact tester. The composite whose molar ratio of epoxy resin to curing agent is 1 : 0.9 (sample 3), showed better tensile strength, coefficient of elastic modulus, elongation, and impact strength than other composites did. The highest tanδ from dynamic mechanical analysis (DMA) was observed from sample 2 (epoxy resin: dicy = 1 : 0.7) while sample 3 showed slightly lower tanδ than that of 2. The morphology of the fracture surface of the cured composites from SEM showed that the number of subtle lines on the surface caused by impact increase as the contents of amine curing agent accrete. Furthermore, the viscosity change of sample 5 (epoxy resin: dicy = 1 : 1.3) was observed to confirm its storage stability.

• Journal of Nutrition and Health
• /
• v.44 no.1
• /
• pp.61-73
• /
• 2011

The aim of this study was to develop a reliable dietary questionnaire to assess human exposure to food-borne hazards. Eleven food-borne hazards were chosen as a priority control list through a literature review and advisory committees. The 11 food-borne hazards were phthalate, aflatoxin, bisphenol A, polycyclic aromatic hydrocarbons, dioxin, polychlorinated biphenyls, mercury, lead, cadmium, arsenic, and acrylamide. The characteristics, exposure level, and paths of these hazards were reviewed, and questionnaire items were identified to assess human exposure from the literature. A questionnaire was developed for each selected food based on its characteristics. Based on the items in the individual questionnaires, a comprehensive questionnaire, which contained demographic characteristics, job information, socioeconomic factors, health related lifestyles, and dietary behaviors, was developed. A 99-item food frequency questionnaire (FFQ) to assess food-borne hazard exposure was also developed. The FFQ included frequency of food intake during the previous year, container type for purchasing and storing food, and cooking method. The questionnaire developed in this study could be applied to assess dietary factors during an exposure assessment of food-borne hazards in a large population. A validation study for the questionnaire is needed before applying it to surveys.

• Journal of Food Hygiene and Safety
• /
• v.21 no.2
• /
• pp.100-106
• /
• 2006

The use of underarm and body care cosmetics with oestrogenic chemical excipients (particularly the parabens) and the hypothesized association with breast cancer incidence, particularly in women. It is noted that the type of cosmetic product is irrelevant (e.g. antiperspirant/deodorant versus body lotion, moisturizers or sprays versus creams) and attention must focus on issues of actual exposure to chemicals through continued dermal application of body care products and the endocrine/hormonal activity and toxicity of the chemicals in the formulations. To evaluate the estrogenic activities of parabens such as ethylparaben, butylparaben, propylparaben, isobutylparaben and isopropylparaben, we used recombinant yeasts containing the human estrogen receptor [Saccharomyces cerevisiae ER+LYS 8127], human breast cancer MCF-7 cell lines and human estrogen receptor ${\alpha}\;and\;{\beta}$. In E-screen assays, isopropylparaben is the most estrogenic paraben, and in ER competition assay, isobutylparaben is the most estrogenic paraben. We evaluated isopropylparaben was most active in the recombinant yeast assay, followed by propylparaben, ethylparaben, isobutylparaben and butylparaben. Results from this study demonstrate that parabens are observed in human endocrine system. Therefore, we have shown that the parabens is induced the estrogenic activities similar to $17{\beta}$-estradiol and Bisphenol-A.