• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권3호
• /
• pp.339-344
• /
• 2014

This paper presents a novel bipolar junction transistor (BJT) based electrostatic discharge (ESD) protection device. This protection device was designed for 20V power clamps and fabricated by a process with Bipolar-CMOS-DMOS (BCD) $0.18{\mu}m$. The current-voltage characteristics of this protection device was verified by the transmission line pulse (TLP) system and the DC BV characteristic was verified by using a semiconductor parameter analyzer. From the experimental results, the proposed device has a trigger voltage of 29.1V, holding voltage of 22.4V and low on-resistance of approximately $1.6{\Omega}$. In addition, the test of ESD robustness showed that the ESD successfully passed through human body model (HBM) 8kV. In this paper, the operational mechanism of this protection device was investigated by structural analysis of the proposed device. In addition, the proposed device were obtained as stack structures and verified.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.351-354
• /
• 2004

This thesis presents Bipolar transistor with SAVEN(Self-Aligned VErtical Nitride) structure as a high-speed device which is essential for high-speed system such as optical storage system or mobile communication system, and proposes 0.8${\mu}m$ BiCMOS Process which integrates LDD nMOS, LDD pMOS and SAVEN bipolar transistor into one-chip. The SPICE parameters of LDD nMOS, LDD pMOS and SAVEN Bipolar transistor are extracted, and comparator operating at 500MHz sampling frequency is designed with them. The small Parasitic capacitances of SAVEN bipolar transistor have a direct effect on decreasing recovery time and regeneration time, which is helpful to improve the speed of the comparator. Therefore the SAVEN bipolar transistor with high cutoff frequency is expected to be used in high-speed system.

• 전기전자학회논문지
• /
• 제7권1호
• /
• pp.1-8
• /
• 2003

본 논문에서는 고내압 및 고속 스위칭 특성을 갖는 고성능 BCD(Bipolar- CMOS-DMOS) 소자 구조를 고안하였다. 공정 및 소자 시뮬레이션을 통하여, 최적화된 공정 규격과 소자 규격을 설계하였으며, 고안된 소자의 전기적 특성을 만족시키기 위하여 이중 매몰층 구조, 트랜치 격리 공정, n-/p- 드리프트 영역 형성기술 및 얕은 접합 깊이 형성기술 등을 채택하였다. 이 스마트 파워 IC는 20V급 Bipolar npn/pnp 소자, 60V급 LDMOS소자, 수 암페어급의 VDMOS, 20V급 CMOS소자 그리고 5V급 논리 CMOS를 내장하고 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1460-1462
• /
• 1994

BiCMOS is the newly developed technology that integrates both CMOS and bipolar structures on the same integrated circuit. Improved performance can be obtained from combining the advantages of high density and low power in CMOS with the speed and current capibility advantages by bipolar. However, the major drawbacks to BiCMOS are high cost, long fabrication time and difficulty of merging CMOS with bipolar without degrading of device Performance because CMOS and bipolar share same process step. In this paper, N-Well CMOS oriented BiCMOS process and optimization of device performance are studied when N-Well links CMOS with bipolar process step by 2D process and 3D Device simulation. From the simulation, Constriction of linking process step has been understood and provided to give the method of choosing BiCMOS for various analog design request.

• 전자공학회논문지A
• /
• 제30A권10호
• /
• pp.20-26
• /
• 1993

The base-collector capacitance of an npn bipolar transistor in bipolar or BiCMOS technology has significant influence on the switching performances, and comprises pnjunction component and MOS component. Both components have complicated dependences on the isolation oxide structure, epitaxial doping density, and bias voltage. Analytical/empirical formulas for both components are derived in this paper for a generic isolation structure as a function of epitaxial doping density and bias voltage based on some theoretical understanding and two-dimensional device simulations. These formulas are useful in estimating the effect of device isoation schemes on the switching speed of bipolar transistors.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.249-252
• /
• 2000

A new Smart rower IC's based on the Partial SOI technology was designed for such applications as mobile communication systems, high-speed HDD systems etc. A new methodology of integrating a 0.8${\mu}{\textrm}{m}$ BiCMOS compatible Smart Power technology, high voltage bipolar device, high speed SAVEN bipolar device, LDD NMOSFET and a new LDMOSFET based on the Partial SOI technology is presented in this paper. The high voltage bipolar device has a breakdown voltage of 40V for the output stage of analog circuit. The optimized Partial SOI LDMOSFET has an off-state breakdown voltage of 75 V and a specific on- resistance of 0.249mΩ.$\textrm{cm}^2$ with the drift region length of 3.5${\mu}{\textrm}{m}$. The high-speed SAVEN bipolar device shows cut-off frequency of about 21㎓. The simulator DIOS and DESSIS has been used to get these results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.131-135
• /
• 2009

This paper reviews the characteristics of Power MOSFET device technology that are leading to improvements in power loss for power electronic system. The silicon bipolar power transistor has been displaced by silicon power MOSFET's in low and high voltage system. The power electronic technology requires the marriage of power device technology with MOS-gated device and bipolar analog circuits.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1978년도 제12차 학술대회연제 순서 및 초록
• /
• pp.9.1-10
• /
• 1978

Action potential의 본체는 cochlear nerve의 섬유집합의 주기적 흥분을 보이는 전위변화(복합활동전위)를 말한다. 와우신경섬유의 흥분인 impulse wave-form은 음양(N.P,)의 bipolar wave-form을 나타내기 때문에 A.P.도 이상성 wave-form으로 나타난다. 기계적으로나 약물로 내외모세포를 파괴한 가묘의 고실계에 induction coil을 삽입하고 동시에 outer device를 통해서 준 음자극에 의하여 얻은 파형을 분석 보고한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.292-295
• /
• 2004

The SIT was introduced by Nishizawa. in 1972. When compared with high-voltage, power bipolar junction transistors, SITs have several advantages as power switching devices. They have a higher input impedance than do bipolar transistors and a negative temperature coefficient for the drain current that prevents thermal runaway, thus allowing the coupling of many devices in parallel to increase the current handling capability. Furthermore, the SIT is majority carrier device with a higher inherent switching speed because of the absence of minority carrier recombination, which limits the speed of bipolar transistors. This also eliminates the stringent lifetime control requirements that are essential during the fabrication of high-speed bipolar transistors. This results in a much larger safe operating area(SOA) in comparison to bipolar transistors. In this paper, vertical SIT structures are proposed to improve their electrical characteristics including the blocking voltage. Besides, the two dimensional numerical simulations were carried out using ISE-TCAD to verify the validity of the device and examine the electrical characteristics. A trench gate region oxide power SIT device is proposed to improve forward blocking characteristics. The proposed devices have superior electrical characteristics when compared to conventional device. Consequently, the fabrication of trench oxide power SIT with superior stability and electrical characteristics is simplified.

• 전자공학회논문지A
• /
• 제28A권10호
• /
• pp.821-829
• /
• 1991

In this paper, a BICMOS technology that has CMOS devices for digital application and bipolar devices for high voltage (80V) analog applications is presented. Basic concept to design BICMOS device is simple process technology without making too many performance trade-offs. The base line process is poly gate p-well CMOS process and three additional masking steps are added to improve bipolar characteristics. The key ingredients of bipolar integration are n+ buried layer process, up/down isolation process and p-well base process. The bipolar base region is formed simultaneously with the region of CMOS p-well area to reduce mask and heat cycle steps. As a result, hFE value of NPN bipolar transistor is 100-150(Ic=1mA). Collector resistance value is 138 ohm in case of bent type collector structure. Breakdown voltage of BVebo, BVcbo and BVceo are 21V, 115V and78V respectively. Threshold voltage is ${\pm}$1.0V for NMOS and PMOS transistor. Breakdown voltage of NMOS and PMOS transistor is obtained 22V and 19V respectively. 41 stage CMOS ring oscillator has 0.8ns delay time.