• Korean Journal of Agricultural Science
• /
• v.48 no.2
• /
• pp.343-351
• /
• 2021

Screening was conducted using 200 kinds of plant extracts to explore herbicide-activated components of plant origin. We separated and purified active substances and elucidated chemical structures using Ligularia stenocephala M., which has strong activity and has not yet been studied. When the solvent fractions of the leaves of Ligularia stenocephala M. were tested for their herbicidal activity, ethyl acetate and chloroform layer showed an inhibition rate of 95.2% and 94.1%, respectively. In particular, the chloroform layer exerted more than 50% herbicidal activity at 10 ppm. From the chloroform layer with the highest herbicidal activity, we isolated three herbicidal active compounds using stepwise chromatography, specifically silica gel or octadecyl silica (ODS) column chromatography, Sep-pak cartridges, and high performance liquid chromatography (HPLC). Based on the analysis of the active compounds using electron ionization mass spectroscopy (EI-MS), ¹H-NMR, and ¹³C-NMR, we identified the active compounds as euparin, 5,6-dimethoxy-2-isopropenylbenzofuran, and liguhodgsonal. When the herbicidal activity of the identified compounds was tested, euparin showed selective herbicidal activity for lettuce at 10^-3 M, and both liguhogsonal and 5,6-dimethoxy-2-isoprophenylbenzofuran exerted selective activity for rice and Echinochloa crus-galli.

• The Korean Journal of Pesticide Science
• /
• v.7 no.4
• /
• pp.302-309
• /
• 2003

Disease control activities of 230 triazolyl quinoline derivatives were investigated against six plant diseases such as rice blast, rice sheath blight, tomato gray mold, tomato late blight, wheat leaf rust (WLR) and barley powdery mildew (BPM). New triazolyl quinolines, KSI-4315 and KSI-4317 exhibited a great in vivo control activities against WLR and BPM, and then were selected for further tests such as preventive, curative, systemic, and persistence against WLR and BPM. The KSI-4315 and KSI-4317 contained MeS moiety and MsO moiety in carbon 4-position, respectively. They possessed both preventive activity and curative activity against WLR and BPM. KSI-4317 showed the better control activity than KSI-4315 against BPM, while KSI-4315 represented the better antifungal activity against WLR. Good persistence of KSI-4315 and KSI-4317 were also observed against WLR and BPM. Persistence of KSI-4315 was similar to that of KSI-4317 on WLR, but KSI-4317 was superior to KSI-4315 on BPM in its persistence. Systemic disease control of KSI-4315 and KSI-4317 was investigated by examining translaminar activity from leaf-under-surface to leaf-upper-surface, systemic activities by leaf to leaf movement and the effect of drenching treatment. Systemicities of KSI-4315 and KSI-4317 were not observed in wheat, but KSI-4317 showed more predominant systemicity than KSI-4315 in barley. These results suggest that KSI-4317 would potentially control WLR and BPM in the fields.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.4
• /
• pp.362-367
• /
• 2006

Waste activated sludge(WAS) collected from domestic wastewater treatment plant is biomass that contains large quantities of organic matter. However, relevant literature show that the bio-hydrogen yield using WAS was too low. In this study, the effect of pretreatment of WAS on hydrogen yield was investigated. Pretreatment includes acid and alkali treatments, grinding, heating, ozone and ultrasound methods. After pretreatment organic matters of WAS were solubilized and soluble chemical oxygen demand(SCOD) was increased by 14.6 times. Batch experiments were conducted to investigate the effects of pre-treatment methods and buffer solution, hydrogen partial pressure, and sodium ion on hydrogen production from WAS by using heated anaerobic mixed cultures. Experimental results showed that addition of buffer solution, efficient pre-treatment method with alkali solution, and gas sparging condition markedly increased the hydrogen yield to 0.52 mmol $H_2/g$-DS.

• Journal of Bio-Environment Control
• /
• v.14 no.4
• /
• pp.280-283
• /
• 2005

The growth and yield of ever-bearing strawberry $(Fragaria{\times}ananassa\; Duch.)$ 'Pechika' were compared after transplant treatment in the raised hydroponic culture on highlands in summer season. The transplant production methods compared were whole plant refrigerated, outdoor over-wintered, pot-refrigerated, and 1 -year-old transplants. Growth increment at planting was the highest in pot-refrigerated transplants. C/N ratio of the pot-refrigerated transplants was 39.2 which was higher than 19.5 of 1-year-old transplants. However, the growth increment up to the first harvest were not different among the treatments. The first harvesting date of 1-year-old transplants was August 14, which was 5-9 days late than in the other treatments. The average fruit weight was highest in the 1-year-old transplants with 12.6 g. Marketable yield was the highest in the pot-refrigerated transplants, followed 1-year-old, plant refrigerated, and outdoor over-wintered transplants. Therefore, the pot-refrigerated transplants are recommended for marketable yield increase in ever-bearing strawberry cultured on highlands.

• 한국해양학회지
• /
• v.30 no.4
• /
• pp.341-354
• /
• 1995

Fluorescence characteristic and amino acids composition of organic matter were determined from extracted seawater samples at eight stations in the East Sea of Korea. Organic compounds have been extracted onto C-18 Sep-Pak cartridges. Three dimensional excitation/emission fluorescence contouring of extracts showed two markedly distinct characterized fluoroscopies representing protein-like biomacromolecule and humic-like geomacromolecule. Protein-like biomacromolecule showing fluorescence maxima at 280 nm/330 nm (excitation/emission) were abundant in the surface mixed layer and then apparently decreased below the thermocline at most stations. It suggests that source of biomacromolecule is comely related with vigorous biological synthetic activity in the surface layer and bacteria decompose its biologically labile components near the thermocline and in the deeper layer. On the other hand, humiliate geomacromolecule showing fluorescence maxima at 330 nm/430 nm (excitation/emission) were low in the surface mixed layer implying photochemical oxidation and then increased below the thermocline at most stations. It suggests that geomacromolecule might be transformed by condensation of bio-refractoryorganic fraction after decomposition of biomacromolecule and particulate organic carbon derived from the surface mixed layer. HPLC measurements of amino acids showed similar composition between seawater and extracted organic macromolecule after hydrolysis. Glycine, serine and alanine were predominant, accounting for more than 50% of total amino acids. Dissolved free amino acids of seawater were more abundant in the surface layer(0.7∼1.8 uM) than the deeper layer (0.2∼0.4 uM). D/L racemic ratio of alanine of extracted organic matter showed lower value in the surface layer than the deeper layer. It suggests that biomacromolecule predominant in the surface layer is relatively young, rapidly recycling and biologically labile.

• Toxicological Research
• /
• v.29 no.1
• /
• pp.21-25
• /
• 2013

The selective targeting of an integrin ${\alpha}_v{\beta}_3$ receptor using radioligands may enable the assessment of angiogenesis and integrin ${\alpha}_v{\beta}_3$ receptor status in tumors. The aim of this research was to label a peptidomimetic integrin ${\alpha}_v{\beta}_3$ antagonist (PIA) with $^{99m}Tc(CO)_3$ and to test its receptor targeting properties in nude mice bearing receptor-positive tumors. PIA was reacted with tris-succinimidyl aminotriacetate (TSAT) (20 mM) as a PIA per TSAT. The product, PIA-aminodiacetic acid (ADA), was radiolabeled with $[^{99m}Tc(CO)_3(H_2O)_3]^{+1}$, and purified sequentially on a Sep-Pak C-18 cartridge followed by a Sep-Pak QMA anion exchange cartridge. Using gradient C-18 reverse-phase HPLC, the radiochemical purity of $^{99m}Tc(CO)_3$-ADA-PIA (retention time, 10.5 min) was confirmed to be > 95%. Biodistribution analysis was performed in nude mice (n = 5 per time point) bearing receptor-positive M21 human melanoma xenografts. The mice were administered $^{99m}Tc(CO)_3$-ADA-PIA intravenously. The animals were euthanized at 0.33, 1, and 2 hr after injection for the biodistribution study. A separate group of mice were also co-injected with 200 ${\mu}g$ of PIA and euthanized at 1 hr to quantify tumor uptake. $^{99m}Tc(CO)_3$-ADA-PIA was stable in phosphate buffer for 21 hr, but at 3 and 6 hr, 7.9 and 11.5% of the radioactivity was lost as histidine, respectively. In tumor bearing mice, $^{99m}Tc(CO)_3$-ADA-PIA accumulated rapidly in a receptor-positive tumor with a peak uptake at 20 min, and rapid clearance from blood occurring primarily through the hepatobiliary system. At 20 min, the tumor-to-blood ratio was 1.8. At 1 hr, the tumor uptake was 0.47% injected dose (ID)/g, but decreased to 0.12% ID/g when co-injected with an excess amount of PIA, indicating that accumulation was receptor mediated. These results demonstrate successful $^{99m}TC$ labeling of a peptidomimetic integrin antagonist that accumulated in a tumor via receptor-specific binding. However, tumor uptake was very low because of low blood concentrations that likely resulted from rapid uptake of the agent into the hepatobiliary system. This study suggests that for $^{99m}Tc(CO)_3$-ADA-PIA to be useful as a tumor detection agent, it will be necessary to improve receptor binding affinity and increase the hydrophilicity of the product to minimize rapid hepatobiliary uptake.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.106-111
• /
• 2012

Purpose: The purpose of this study was to compare the effect of 3 chairside polishing methods and laboratory polishing methods on surface roughness and $C.$ $albicans$ adhesion of polyamide denture base. Materials and methods: Using contact profilometer, the surface of polyamide specimens ($25{\times}15{\times}2mm$) was studied after conventional polishing without finishing and after chiarside polishing with 2 chiarside polishing kits and chairside-pumice polishing following finishing with tungsten carbide bur. To evaluate the adhesion of $C.$ $albicans$, $C.$ $albicans$ suspension was overlayed on the test specimen. And the specimens were incubated for 2 hours. Imprint culture method was achieved and counted the colony on the agar plate. Polished polyamide were evaluated using a scanning electron microscope. The statistics were conducted using one-way ANOVA and in case of difference, Scheffe test and Tamhane's T2 test were used. Results: Surface roughness (Ra) of surfaces polished with 2 chairside polishing kits had higher than conventional polishing and pumice polishing. The highest roughness value was $0.32{\pm}0.10{\mu}m$, and the lowest was $0.02{\pm}0.00{\mu}m$. The adhesion of $C.$ $albicans$ on the specimens polished with chairside polishing group and pumice polishing group were increased than conventional polishing group ($P$<.01). Conclusion: Conventional laboratory polishing was found to produce the smoothest surface and the lowest adhesion of $C.$ $albicans$. Two groups polished with Chairside polishing kits were similar with respect to surface roughness. Surface of the specimen polished with pumice is significantly smoother than 2 chairside polishing groups, but the result of $C.$ $albicans$ adhesion is that group polished with pumice was similar with 2 chairside polishing groups ($P$>.01).

• Corrosion Science and Technology
• /
• v.14 no.2
• /
• pp.93-98
• /
• 2015

Recently, Stainless steels have been increasingly selected as the fitting or the valve materials of water pipes as the human health issue is getting higher and higher. Therefore, the connectors attached at pipes to deliver water are exposed to more severe environments than the pipes because crevice or galvanic corrosion is apt to occur at the fittings or the valves. Effects of the solid solution annealing, cooling rate after this heat treatment, and passivation on the corrosion properties of the shell mold casted SSC13 (STS304 alloy equivalent) were studied. The heating and quenching treatment more or less reduced hardness but effectively improved corrosion resistance. It was explained by the reduction of delta ferrite contents. Independent of heat treatment, the chemical passivation treatment also lowered corrosion rate but the improvement of corrosion resistance depended on temperature and time for passivation treatment indicating that the optimum conditions for passivation treatment were the bath temperature of $34^{\circ}C$ and operating time of 10 minutes. Therefore it is suggested that the corrosion resistance of SSC13 can be effectively improved with the heat treatment, where SSC13 is heated for 10 minutes at $1120^{\circ}C$ and quenched and passivation treatment, where SSC13 is passivated for at least 10 seconds at $34^{\circ}C$ nitric acid solution.

• Journal of Korea Foundry Society
• /
• v.35 no.5
• /
• pp.109-113
• /
• 2015

In this study, the measurement of FN (ferrite volume fraction) and the solution annealing ratio at a temperature of $1130^{\circ}C$ were determined with 15A elbow fittings of shell cast SSC13, and the corrosion resistance with and without austenitizing solution annealing were investigated in comparison with AISI304. The delta ferrite phase was observed in the material due to the slow cooling effect of the shell mold casting. However, the delta ferrite phase decreased gradually with the solution annealing at a temperature of $1130^{\circ}C$. The hardness generally decreased with a heat treatment; however, its corrosion resistance was improved with the heat treatment. In addition, when a passivation treatment was applied, its corrosion ratio showed the lowest value. The pattern of general corrosion decreased due to the decrease in the delta ferrite phase with the solution annealing treatment. Consequently, it is suggested that the corrosion resistance of SSC13 elbow fittings can be improved by increasing the ratio of any solution annealing treatment used and by decreasing the ferrite phase. The relationship between the ratio of solution annealing and delta ferrite is expressed as follows: SA (solution annealing ratio,%) = 98 - FN (ferrite volume fraction, %).

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.4
• /
• pp.533-548
• /
• 1998

The purpose of this study was to investigate the influence of balancing interference on the mandibular movement and masticatory muscle activity. 5 subjects(male. average age of 24.3) without dysfuction in masticatory system were selected. The balancing interference was provided by construction of cast metal crown and onlay on the upper and lower first molars. Clinical examination, changes displacement and velocity, and muscle activity were recorded and analyzed by means of BioPak system(Bioresearch Inc., Milwaukee Wisconsin. USA). The results were as follows ; 1. In clinical examination, various symptoms were reported by all subjects after application of interference. Almost symptoms were subsided after elimination of interference. 2. In the border movements in frontal plane, lateral border movement toward non-interference side was changed according to the interference after application of interference. Immediately after removal of interference, border movements' pattern was recovered as same as before experiment. 3. During gum chewing on the non-interference side, horizontal movement was decreased immediately after application of interference(p<0.05). 1 week after application of interference, horizontal movement was more decreased in 3 subjects and showed a chopping type masticatory stroke. But in 2subjects, horizontal movement was increased to avoid interference. 4. In EMG of the mandibular rest position, no significant changes were showed in the experiment period(p>0.05). 5. During gum chewing on the interference side, the activity of opposite temporal muscle was increased immediately after application of interference(p<0.05). 1 week after application of interference. The activity of ipsilateral temporal muscle and left and right masseter muscles was increased (p<0.05). 1 week after elimination of interference, increased muscle activity was recovered about the same level as before experiment. 6. During gum chewing on the non-interference side, 1 week after application of interference, the activity of ipsilateral temporal muscle was increased (p<0.05). 1 week after elimination of interference. increased muscle activity was returned about the same level as before experiment.