• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.12
• /
• pp.2342-2348
• /
• 2009

Even though underground transmission cable is an essential transmission method to supply stable power for downtown and population center, the interaction of electromagnetic force by fault current is very large comparing to overhead transmission line due to restricted installation space such as tunnel, and close consideration is required for it. This paper presents countermeasures to reduce and release the effect of electromagnetic force with rope binding and installation of spacer and describes its efficacy through three phase short-circuit test, which will be utilized as basic materials for improvement and development of cleat, hanger, etc. to reduce and release effect of electromagnetic force in the future.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.196-199
• /
• 2003

In this paper, we have been described a new constructing method of multichannel biosensor using self-assembly by magnetic force interaction. A metal particle and an array was fabricated by photolithographic. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by magnetic force interaction and self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.3
• /
• pp.418-423
• /
• 2007

Meats with alginate binders including sodium alginate, glucono-delta-lactone and calcium carbonate were tested in restructured steaks made from M. pectoralis profundus of beef steers in terms of meat quality and binding ability by tumbling time. The treatment with 25 min tumbling time was significantly lower (p<0.05) for crude protein than 5 and 15 min, while higher (p<0.05) for moisture content. This corresponded with sensory panel juiciness ratings, which showed the treatment for longer tumbling times to be significantly juicier (p<0.05) than that for a shorter time. Cooking loss decreased (p<0.05) linearly with an increased tumbling time, and Kramer shear force also significant decreased (p<0.05) with tumbling time. This corresponded with sensory panel tenderness ratings, which showed that the treatment for longer tumbling times was more tender (p<0.05). The texture results indicated that longer tumbling time had lower (p<0.05) hardness and chewiness values. Sensory panels ranked binding ability in the order 5 min, 15 min and 25 min from best to worst, and the overall acceptability for slices from roasts of treatments for 5 and 15 min were rated by the sensory panelists as moderate to very acceptable, but those for 25 min were rated as fair to moderate.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.2 s.344
• /
• pp.16-21
• /
• 2006

Internet Engineering Task Force(IETF) proposed the Hierarchical Mobile IPv6(HMIPv6) to support mobility efficiently. The HMIPv6 was developed to reduce the signaling overhead and delay concerned with Binding Update in Mobile IPv6. However, the HMIPv6 still need a further enhancement for supporting the real-time application because HMIPv6 only concerns with the latency resulted within a MAP For providing seemless handoff we propose a scheme that can reduce latency when Mobile Node changes a MAP. Also we compare the HMIPv6 with the proposed scheme through a analysis model.

• Journal of the Korean Society of Industry Convergence
• /
• v.10 no.1
• /
• pp.5-14
• /
• 2007

It is necessary for development of drawing product with press to have suitable material selection & all process design and the problem during press process has been cleared from judgement of experience & trial and error. Recently we can estimate press process result from computer aided design & FEM. But we can get more reliable result when we can put more precise process variants during FEM. In case of using a drawbead that is used for the material inflow, it is considered for us to put material property, other analysis condition & friction figure when material is passing through the drawbead for better FEM. From our study, we have drawn an analogy bead connection depth, friction figure & drawing and restraining load according to kinds of lubrication from experiment & FEM for the drawbead. We applied above result to the drawing experiment & FEM and confirmed the validity. We could notice the relation between friction figure & drawing load and the friction figure variation according to kinds of lubrication. It is expected to draw more precise analogy that can be used for real process due to more precise process variants application to FEM.

• Journal of Microbiology and Biotechnology
• /
• v.12 no.2
• /
• pp.296-300
• /
• 2002

Bacterial cell surface components are the major factors responsible for pathogenesis and bioremediation. In particular, the surface of a Gram-negative bacterium cell has a variety of components compared to that of a Gram-positive cell. In our previous study, we isolated an isogenic mutant of Bradyrhizobium japonicum, which exhibited altered cell surface characteristics, including an increased hydrophobicity. Polyacrylamide gel electrophoretic analysis of the lipopolysaccharide (LPS) in the mutant demonstrated that the O-polysaccharide part was completely absent. Meanwhile, a gel permeation chromatographic analysis of the exopolysaccharide (EPS) in the mutant demonstrated that it was unaltered. Since LPSs are known to have several anion groups that interact with various cation groups and metal ions, the mutant provided an opportunity to examine the direct role of LPS in metal binding by B. japonicum. Using atomic absorption spectrophotometry, it was clearly demonstrated that LPS was involved in metal binding. The binding capacity of the LPS mutant to various metal ions $(Cd^{2+},\;Cu^{2+},\;Pb^{2+},\;and\;Zn^{2+})$ was 50-70% lower than that of the wild-type strain. Also, through an EPS analysis and desorption experiment, it was found that EPS and centrifugal force had no effect on the metal binding. Accordingly, it would appear that LPS molecules on B. japonicum effect the properties, which precipitate more distinctly metal-rich mineral phase.

• Korean Journal of Microbiology
• /
• v.49 no.3
• /
• pp.253-261
• /
• 2013

The purpose of this study was to investigate the aflatoxin $B_1$ binding of lactic acid bacteria (LAB) isolated from Korean traditional soybean paste and to evaluate the effect of incubation conditions and physico-chemical factors on the binding ability of LAB to this mutagen. The amount of aflatoxin $B_1$ bound by Enterococcus faecium DJ22, Lactobacillus fermentum DJ35, Lactobacillus rhamnosus DJ42, and Lactobacillus pentosus DJ47 was strain specific with the percent bound ranging from 19.3% to 52.1%. However, Enterococcus faecalis DJ14, Lactobacillus panis DJ29, and Pediococcus halophilus DJ50 strains did not exhibit any of the binding ability to aflatoxin $B_1$. For most strains, the binding ability was significantly affected by the environmental conditions such as the aflatoxin $B_1$ level, incubation time and temperature, and the initial cell count of LAB. The stability of the aflatoxin $B_1$-bacteria complexes was significantly more unstable after washing. In addition, the binding stability between viable and nonviable cells was not statistically significant. Treatment with heating, acidic pH, ${\alpha}$-amylase, protease, lysozyme, or sodium metaperiodate caused a significant (P<0.05) decrease in aflatoxin $B_1$ binding for the tested strains, suggesting that carbohydrates or proteins in the cell walls may be involved in aflatoxin $B_1$ binding ability. Since the aflatoxin $B_1$ binding of LAB was significantly reduced (P<0.05) by the pretreatment of the urea, the binding force observed in this study may have resulted from hydrophobic interaction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7B
• /
• pp.668-676
• /
• 2009

Hierarchical Mobile 1Pv6(HM1Pv6) have been proposed by IETF(Internet Engineering Task Force) beginning from Mobile 1Pv6 for mobility support in IP networks, however these researches relying on client based mobility support have not been drawn attention due to excessive consumption of wireless resources and long handover delay. In this paper, we propose the Router-based Binding Update(RBU) scheme to solve problems in existing client-based mobility support schemes. The router registers location information of mobile nodes through Neighbor Discovery protocol without additional codes for the RBU scheme to a terminal operated by existing HMlPv6. By using this the RBU scheme is designed so that it can support partial nupport based mobility and reduce handover latency rather than using HMIPv6. It is analysed and compared with existing HMIPv6 to verify efficiency of the RBU scheme. As a result, the RBU scheme has outperformed existing HMIPv6 by 15% in terms of macro handover delay especially when long delay on wireless links exists.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1317-1318
• /
• 2006

In this paper, we have been described a new constructing method of multichannel biosensor using self-assembly by magnetic force interaction. A metal particle and an array was fabricated by photolithographic. Biomaterials were immobilized on the metal particle. The array and the particles were mixed in a buffer solution, and were arranged by magnetic force interaction and self-assembly. A quarter of total Ni dots were covered by the particles. The binding direction of the particles was controllable, and condition of particles was almost with Au surface on top. The particles were successfully arranged on the array. The biomaterial activities were detected by chemiluminescence.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.3 s.303
• /
• pp.1-8
• /
• 2005

At IETF (Internet Engineering Task Force), recently RFC3775, RFC3776 documents about the mobile IPv6 were standardized by IETF (Internet Engineering Task Force). Those specifications propose that during the roaming, the mobile node sends securely the binding update to the home agent and the correspondent node after setting the security association between Mobile Node and Home Agent. But there is no secure bootstrapping method between a mobile node and a home agent at the two RFC documents. This paper proposed a method for the secure bootstrapping between a mobile node and a home agent. This makes the authentication, binding update, home agent assignment, security association distribution through the AAA-based secure channel between mobile node and home agent. And the proposed method was analyzed in the view of the procedure, round trip and security strength.