• Title/Summary/Keyword: Binary

Search Result 6,155, Processing Time 0.027 seconds

Viscosities of $LaCl_3-NaCl$ Binary Melts ($LaCl_3-NaCl$ 2성분계 용융염의 점도)

  • Kim, Ki-Ho
    • Journal of the Korean institute of surface engineering
    • /
    • v.39 no.6
    • /
    • pp.282-287
    • /
    • 2006
  • Viscosities of $LaCl_3-NaCl$ binary melts were measured by the capillary method over the range of their liquidus temperatures to about 1200K. The cell constant were determined by using pure water. The results obtained are summerized as follows: Viscosities were decreased with the content of NaCl for all over the composition range of binary melts. Composition - viscosity relation for the binary melts show a non-linear from the additivity line and the deviations shows a maximum at about 60 mol% NaCl. This suggests the existence of the complex ion of $LaCl_4^-$ in the melt. Activation energy for viscous flow of the binary melts decrease monotonously with the increasing content of NaCl.

Binary Nature Revealed in Circumstellar Spiral-Shell Patterns

  • Kim, Hyosun;Hsieh, I-Ta;Liu, Sheng-Yuan;Taam, Ronald E.
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.39 no.1
    • /
    • pp.56.1-56.1
    • /
    • 2014
  • With the advent of high-resolution high-sensitivity observations, spiral patterns have been revealed around several asymptotic giant branch (AGB) stars. Such patterns can provide possible evidence for the existence of central binary stars embedded in outflowing circumstellar envelopes. It is, however, not generally recognized that the binary induced pattern, vertically extended from the orbital plane, exhibits a ring-like pattern with an inclined viewing angle. I will first review the binary-induced spiral-shell patterns on the AGB circumstellar envelopes with the effect of inclination angle with respect to the orbital plane, of which large inclination cases reveal incomplete ring-like patterns. I will describe a method of extracting such spiral-shell from the gas kinematics of an incomplete ring-like pattern to place constraints on the characteristics of the (unknown) central binary stars. This first success may open the possibility of connecting the ring-like patterns commonly found in the AGB circumstellar envelopes and in the outer parts of (pre-)planetary nebulae and pointing to the conceivable presence of central binary systems, which may give a clue for the onset of asymmetrical planetary nebulae.

  • PDF

Electric Conductivities of LaC $l_3$-LiCl Binary Melts (용융 LaC $l_3$-LiCl 2성분계 혼합염의 전도도)

  • Kim Ki-Ho
    • Journal of the Korean institute of surface engineering
    • /
    • v.37 no.5
    • /
    • pp.301-306
    • /
    • 2004
  • Electric Conductivities of $LaCl_3$-LiCl binary melts have been measured by the Kohlausch bridge method over the range of their liquidus temperatures to about 1200 K. The electric conductivity increases with the content of LiCl for all over the composition range of binary melts. Composition dependence of the electric conductivity and molar conductivity for the binary melt shows a non-linear relation from the additivity line, and the deviations displays a maximum value at about 60 mol % LiCl. This suggest the existence of the complex ion of$ LaCl_{4}^{-}$ in the melt. Activation energy for electric conductivity of the binary melts decrease monotonously with increasing content of LiCl.l.

Improved Binary CDMA Modem Design for High-Speed Wireless Communications (고속데이터 전송을 위한 개선된 Binary CDMA 모뎀 구현)

  • Lee, Jang-Youn;Cho, Jin-Woong;Hong, Dae-Ki
    • Journal of the Semiconductor & Display Technology
    • /
    • v.9 no.2
    • /
    • pp.11-14
    • /
    • 2010
  • In this paper, an improved binary-CDMA (Code Division Multiple Access) system for high speed multimedia data transmission will be presented. The improved binary CDMA technology will be used in municipal wireless network. The new name of the system is the Guardian system using a binary CDMA technology. The Guardian system can provide high data rate, and improve its throughput by minimizing latency from the limitation of resources of system bus during multimedia data transmission. Finally, we analyze the performance of Guardian modem according to the report of wireless data transmission test.

A New Pipelined Binary Search Architecture for IP Address Lookup (IP 어드레스 검색을 위한 새로운 pipelined binary 검색 구조)

  • Lim Hye-Sook;Lee Bo-Mi;Jung Yeo-Jin
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.29 no.1B
    • /
    • pp.18-28
    • /
    • 2004
  • Efficient hardware implementation of address lookup is one of the most important design issues of internet routers. Address lookup significantly impacts router performance since routers need to process tens-to-hundred millions of packets per second in real time. In this paper, we propose a practical IP address lookup structure based on the binary tree of prefixes of different lengths. The proposed structure produces multiple balanced trees, and hence it solve the issues due to the unbalanced binary prefix tree of the existing scheme. The proposed structure is implemented using pipelined binary search combined with a small size TCAM. Performance evaluation results show that the proposed architecture requires a 2000-entry TCAM and total 245 kbyte SRAMs to store about 30,000 prefix samples from MAE-WEST router, and an address lookup is achieved by a single memory access. The proposed scheme scales very well with both of large databases and longer addresses as in IPv6.

Influence of Electrochemical Polymerization Temperature on the Morphology of Binary-doped Chiral Polyaniline (전기화학적 중합온도가 Binary 도핑된 키랄 Polyaniline 모폴로지에 미치는 영향)

  • Kim, Eunok;Kim, Young-Hwan
    • Journal of the Korean Chemical Society
    • /
    • v.58 no.5
    • /
    • pp.456-462
    • /
    • 2014
  • Binary-doped conducting chiral polyaniline (PAni) was synthesized by electrochemical polymerization of aniline at low-temperature ($0^{\circ}C$) and room-temperature (RT) conditions. (+)-Camphorsulfonic acid (CSA) and hydrochloric acid (HCl) were used as a binary dopant. Formation of the binary-doped PAni rather than a mixture of the corresponding single-doped PAni was confirmed by cyclic voltammogram, FT-IR and circular dichroism spectra. The temperature influenced the electrochemical behavior and doping level, thus determining the crystallinity and morphology of the PAni. However, among other results, morphology of the PAni is found to be most strongly depends on the polymerization temperature. With increased temperature from the initial state to RT, morphology of the PAni changed from fibrous to short-fibrous structure. The sheet resistance of the PAni films on an ITO was measured by using four-point probe dc method.

Study on the Generation of Inaudible Binary Random Number Using Canonical Signed Digit Coding (표준 부호 디지트 코딩을 이용한 비가청 이진 랜덤 신호 발생에 관한 연구)

  • Nam, MyungWoo;Lee, Young-Seok
    • The Journal of Korea Institute of Information, Electronics, and Communication Technology
    • /
    • v.8 no.4
    • /
    • pp.263-269
    • /
    • 2015
  • Digital watermarking is imperceptible and statistically undetectable information embeds into digital data. Most information in digital audio watermarking schemes have used binary random sequences. The embedded binary random sequence distorts and modifies the original data while it plays a vital role in security. In this paper, a binary random sequence to improve imperceptibility in perceptual region of the human auditory system is proposed. The basic idea of this work is a modification of a binary random sequence according to the frequency analysis of adjacent binary digits that have different signs in the sequence. The canonical signed digit code (CSDC) is also applied to modify a general binary random sequence and the pair-matching function between original and its modified version. In our experiment, frequency characteristics of the proposed binary random sequence was evaluated and analyzed by Bark scale representation of frequency and frequency gains.

Design of Visual Tool for Efficient Descripting of Binary ECG File Formats (바이너리 심전도 파일 포맷의 효율적인 디스크립션을 위한 시각적 도구 설계)

  • Koo, Heung-Seo
    • Journal of the Korean Institute of Intelligent Systems
    • /
    • v.17 no.1
    • /
    • pp.26-31
    • /
    • 2007
  • In this study, A BED(Binary ECG description) based binary ECG conversion system is that supports the conversion of a binary ECG format into XML-based HL7 aECG for interoperability of ECG. HL7 aECG is a XML based standard lot interoperability of ECG waveform. However, it is difficult for beginners to write the BED document of binary BED conversion system in XML. We implement a BED Studio on the Java Servlet engine that allows beginners to write BED documents more easily. Our system consists of three parts: Visual Editor, Text Editor, and Format Checking Viewer. Format Checking Viewer support users to detect the format errors in the XML files, so-called BED documents, that describe the data format of the targer binary ECG file in the BED-based binary ECG conversion system, so may reduce the format errors in BED documents.

Efficient Binary Wavelet Reconstruction for Binary Images (이진 영상을 위한 효율적인 이진 웨이블렛 복원)

  • Kang, Eui-Sung
    • The Journal of Korean Association of Computer Education
    • /
    • v.5 no.4
    • /
    • pp.43-52
    • /
    • 2002
  • A theory of binary wavelets which are performed over binary field has been recently proposed. Binary wavelet transform (BWT) of binary images can be used as an alternative to the real-valued wavelet transform of binary images in image processing applications such as compression, edge detection, and recognition. The BWT, however, requires large amount of computations for binary wavelet reconstruction since its operation is accomplished by matrix multiplication. In this paper, an efficient binary wavelet reconstruction method which utilizes filtering operation instead of matrix multiplication is presented. Experimental results show that the proposed algorithm can significantly reduce the computational complexity of the BWT. For the reconstruction of an $N{\times}N$ image, the proposed technique requires only $2MN^2$ multiplications and $2N(M-1)^2$ additions when the filter length M, while the BWT needs $2N^3$ multiplications and $2N(N-1)^2$ additions.

  • PDF