• ETRI Journal
• /
• v.34 no.1
• /
• pp.102-105
• /
• 2012

To serve the growing demand of the bidirectional information exchange, we propose a single relay selection (RS) scheme for physical-layer network coding (PNC) in a bidirectional cooperative network consisting of two sources and multiple relays. This RS scheme selects a single best relay by maximizing the bottleneck of the capacity region of both information flows in the bidirectional network. We show that the proposed RS rule minimizes the outage probability and that it can be used as a performance benchmark for any RS rules with PNC. We derive a closed-form exact expression of the outage probability for the proposed RS rule and show that it achieves full diversity gain. Finally, numerical results demonstrate the validity of our analysis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.408-413
• /
• 2009

In this paper, minimum mean-square-error (MMSE)-based transceiver processing of a bidirectional amplify-and-forward (AF) relay having multiple antennas is proposed. Besides, the optimal beamforming vectors of users are designed in the sense of the sum rate maximization. Simulation results show that the proposed relay processing can effectively reduce both co-channel interferences and self-interferences and that the proposed beamforming method is proper to the bidirectional communication employing the AF relay.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10A
• /
• pp.972-979
• /
• 2008

Two-way relay channel is a bidirectional cooperative communication channel that two terminals communicate each other with the help of a relay. In the previous cooperative communication schemes, a relay uses two divided resources for bidirectional transmission. When a network coding is used at a relay, the relay can transmit bidirectional data to two terminals simultaneously using one resource only. Thus the throughput of this scheme is greater than that of the previous scheme. In this paper, we showa two-way cooperative ARQ protocol using network coding and the throughput of this protocol is analyzed using a state diagram.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.10
• /
• pp.1916-1922
• /
• 2009

Introducing distributed generators(DGs) to utility distribution system can cause malfunction of relay on the grid when ground faults or severe load unbalances are occurred on the system. Because DGs interconnected to the grid can contribute fault currents and make bidirectional power flows on the system, fault currents from DGs can cause an interference of relay operation. A directional over current relay(DOCR) can determine the direction of power flow whether a fault occurs at the source side or load side through detecting the phases of voltage and current simultaneously. However, it is identified in this paper that the contributed fault current(Ifdg) from the ground source when was occurred to contribute single-line-to-ground(SLG) fault current, has various phases according to the distances from the ground source. It means that the directionality of Ifdg may not be determined by simply detecting the phases of voltage and current in some fault conditions. The magnitude of Ifdg can be estimated approximately as high as 3 times of a phase current and its maximum is up to 2,000 A depending on the capacity of generation facilities. In order to prevent malfunction of relay and damage of DG facilities from the contribution of ground fault currents, Ifdg should be limited within a proper range. Installation of neutral ground reactor (NGR) at a primary neutral of interconnection transformer was suggested in the paper. Capacity of the proposed NGR can be adjusted easily by controlling taps of the NGR. An algorithm for unidirectional relay was also proposed to prevent the malfunction of relay due to the fault current, Ifdg. By the algorithm, it is possible to determine the directionality of fault from measuring only the magnitude of fault current. It also implies that the directionality of fault can be detected by unidirectional relay without replacement of relay with the bidirectional relay.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.956-958
• /
• 2010

The paper considers MIMO two-way scheme to optimize the end to end capacity in local wireless mesh network. The basic idea is to perform data transmission via intermediate cooperative nodes and cooperative relay therefore higher throughput can be achieved. Each node is equipped with multiple antennas, and has two time slots one for transmission (Tx) and the other is reception (Rx), which are arranged alternatively in the network. In the conventional SISO network, it takes at least four time slots to accomplish the function of two-way relay. Moreover, cooperative technique is used in order to enhance multiplexing of forward and backward streams.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1279-1300
• /
• 2017

In the interweave cognitive networks, the interference from the primary user degrades the performance of the cognitive user transmissions. In this paper, we propose an adaptive cooperation scheme in the interweave cognitive networks to improve the performance of the cognitive user transmissions. In the proposed scheme for the bidirectional communication of two end-source cognitive users, the bidirectional communication is completed through the non-relay direct transmission, the one-way relaying cooperation transmission, and the two-way relaying cooperation transmission depending on the limited feedback from the end-sources. For the performance analysis of the proposed scheme, we derive the outage probability and the finite-SNR diversity multiplexing tradeoff (f-DMT) in a closed form, considering the imperfect spectrum sensing, the interference from the primary user, and the power allocation between the relay and the end-sources. The results show that compared with the direct transmissions (DT), the pure one-way relaying transmissions (POWRT), and the pure two-way relaying transmissions (PTWRT), the proposed scheme has better outage performance. In terms of the f-DMT, the proposed scheme outperforms the full cooperation transmissions of the POWRT and PTWRT.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.5
• /
• pp.147-151
• /
• 2010

In this paper, we propose network-coding based two-way relay communication using adaptive modulation scheme for satisfying relay QoS(Quality of Service) according to channel environment between user and relay. Two-way relay communication is bidirectional cooperative communication that users exchange own signal with help of relay. Network-coding based two-way relay communication can achieve high throughput compared to conventional scheme through reducing time slots. we propose adaptive M-QAM modulation scheme in network-coding based two-way relay communication for satisfying QoS of relay. Simulation result shows that the proposed scheme satisfies goal QoS of system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.11
• /
• pp.4087-4102
• /
• 2014

Two-way relaying is an effective way of improving system spectral efficiency by making use of physical layer network coding. However, energy efficiency in OFDM-based bidirectional relaying with asymmetric traffic requirement has not been investigated. In this study, we focused on subcarrier transmission mode selection, bit loading, and power allocation in a multicarrier single amplified-and-forward relay system. In this scheme, each subcarrier can operate in two transmission modes: one-way relaying and two-way relaying. The problem is formulated as a mixed integer programming problem. We adopt a structural approximation optimization method that first decouples the original problem into two suboptimal problems with fixed subcarrier subsets and then finds the optimal subcarrier assignment subsets. Although the suboptimal problems are nonconvex, the results obtained for a single-tone system are used to transform them to convex problems. To find the optimal subcarrier assignment subsets, an iterative algorithm based on subcarrier ranking and matching is developed. Simulation results show that the proposed method can improve system performance compared with conventional methods. Some interesting insights are also obtained via simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12A
• /
• pp.975-983
• /
• 2011

In this paper, we investigate how the IEEE 802.16 based wireless system can adopt the network coding. To avoid the problem of overhearing, we focus on the bidirectional traffic, where each end node exchanges network coded data over a relay node. The bidirectional traffic is usually observed in Internet, where TCP makes congestion control and error recovery based on the acknowledgement from the opposite direction. Thus, enhancing the spectral efficiency of wireless Internet through the network coding is expected. Our simulation with realistic radio characteristics and TCP-like traffic shows that the network coding improves the throughput by an average of 36 percent compared to the simple relay case.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1420-1423
• /
• 2015

This letter considers a ship-to-ship communication system in which two ships exchange their information with the help of multiple relay ships. For the system, we propose a novel relay scheme that allows relay ships to select a method between analog network coding (ANC) and digital network coding (DNC) adaptively based on channel state information. We also provide a relay selection criterion in supporting the proposed adaptive network coding. The simulation results show that the proposed scheme outperforms the conventional scheme employing only the ANC or only the DNC.