• 한국산학기술학회논문지
• /
• 제17권5호
• /
• pp.601-611
• /
• 2016

최근 빈번하게 발생하는 크고 작은 지진에 대비하여 구조물의 지진에 대한 안전성을 확보하기 위한 방안으로 지진격리시스템을 이용한 연구개발과 사용이 점차 증가하고 있다. 지진격리시스템의 하나인 고감쇠 고무받침(HDRB)는 특수한 고감쇠 고무(HDR)를 이용한 적층형 고무받침으로서 유사 지진격리장치인 납 고무받침에 비해 감쇠기능이 다소 떨어지는 단점이 있어 활용도가 높지 않았다. 그러나, 고감쇠 고무받침은 재료와 형상이 유사한 천연고무받침의 비해 우수한 감쇠력을 가지고 있으며 기존 납 고무받침의 경우 납의 유해성이 문제되어 납을 사용하지 않은 고감쇠 고무받침에 대한 연구가 증가하고 있다. 본 연구에서는 고감쇠 고무받침을 대상으로 압축응력 의존성 및 주파수 의존성, 반복하중 의존성 등 다양한 특성에 대하여 실험을 실시하였다. 그리고 여러 계기지진파 상태에서 고감쇠 고무받침의 내진성능을 평가하기 위해 진동대 실험과 분석을 수행하였다. 축소교량에 고감쇠 고무받침을 적용한 모델을 사용했고, 지진격리와 비 지진격리로 구분하여 진행하였다. 그 결과 고감쇠 고무받침을 적용할 경우 비 지진격리의 경우에 비해 높은 감쇠효과를 보였으나 Mexico City와 같은 연약지반의 구조물에 지진격리를 적용할 경우 오히려 구조물의 응답이 증가하는 양상을 나타내 지진격리장치 적용성에 주의해야 할 것으로 판단된다.

• Tribology and Lubricants
• /
• 제10권2호
• /
• pp.43-50
• /
• 1994

The hydrodynamic bearing is accepted in many rotating systems because it has a large load carrying capacity. But the anisotropic pressure distribution of the bearing can arise the unstable vibration phenomenon over a certain speed. The magnetic bearing is an active element so that the unstable phenomenon of the hydrodynamic bearing, which is induced by the anisotropic support pressure of the oil film, can be controlled if the control algorithm and the controller gains are chosen appropriately. In this study, we investigate the stabilization method of the hydrodynamic bearing system composing the hybrid bearing which is the single unit of hydrodynamic bearing and magnetic bearing. The load carrying conditions of the hybrid bearing is modelled by the sum of the stiffness and damping coefficients of the hydrodynamic and the magnetic bearings in each direction. The dynamics of the rotor is analyzed by the Finite Element Method and the stability limit is determined by the eigenvalues of the hybrid bearings and shaft system. The eigenvalue study of the system shows that the stability limit of the hybrid bearing is increased compared to that of the hydrodynamic bearing. A Small increment of the stiffness and damping coefficient of the hybrid bearings by the magnetic actuators can increase the stability limit of the system. In this paper we tried to show the design references of the hybrid bearings by using the nondimensional bearing parameters. The analysis results show the possibilities of the stability limit increment of the hydrodynamic bearing system by combining the magnetic bearing.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1997년도 봄 학술발표회 논문집
• /
• pp.35-38
• /
• 1997

• Tribology and Lubricants
• /
• 제20권4호
• /
• pp.197-203
• /
• 2004

As the rotational speed and the track density are increased, the vibration of disk/spindle system becomes critical issue in order to reduce the track mis-registration. In this work, we propose a simple inclined air bearing (20${\times}$20 mm) system which is located very near to the rotating poly-carbonate disk, and investigate suppressing effect for the disk vibration mode (0,0) both experimentally and numerically. We find dynamic stiffness and damping coefficients of air bearing and then apply those values to the disk vibration analysis. Numerical results show about 10 percent difference comparing to the experimental results. Also we investigate the reduction of disk vibration and power consumption with two different kinds of inclined bearing for the normal disk drive system experimentally. We find inclined air bearing can reduce about 30 percents of the transverse disk vibration.

• 한국지진공학회논문집
• /
• 제6권1호
• /
• pp.1-6
• /
• 2002

면진베어링으로 기존에 사용되고 있는 철판보강 면진베어링에서 철판을 섬유로 대체하여 섬유보강 면진베어링을 설계 및 제작하였다. 섬유면진보강베어링의 특성을 파악하기 위해서 철판보강 면진베어링과 섬유보강 면진베어링에 대해 수평실험과 압축실험을 수행하였다. 시험결과 섬유보강 면진베어링의 유효 감쇠는 천연고무 면진베어링에 비해서 높았다. 이 결과는 지진하중하에서 섬유보강 면진베어링은 에너지 분산능력이 뛰어나다는 것을 의미한다. 이 연구결과로 인해 섬유보강 면진베어링이 저가건물에 널리 사용될 수 있을 것으로 기대된다.

• 한국공간정보시스템학회:학술대회논문집
• /
• 한국공간정보시스템학회 2004년도 춘계 학술발표회 논문집 제1권1호(통권1호)
• /
• pp.89-95
• /
• 2004

The measured damping ratio was analysed to obtain amplitude dependence. Wind-induced vibration of 20 story steel-framed building was measured to investigate amplitude dependence by RD method. Micro-tremo vibrations of 20 RC bearing wall typed buildings were performed to analysis the amplitude dependence by formula proposed by Tamua and ESDU. Amplitude dependent damping in 17 story steel-framed building was showed clearly in the increasing rate of 9%. But Amplitude dependent damping of 17 RC bearing wall typed buildings was very low in the increasing rate of 2.5%. The tendency of dynamic properties of building obtained here are useful for the validation of dynamic properties of buildings in the evaluation of serviceability.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.224-231
• /
• 2006

A six-degree-of-freedom dynamic model with time-varying mesh stiffness/damping and friction has been developed for the dynamic analysis of a gear driving system. This model includes a spur gear pair, bearing, friction and prime mover. Using Newton???s method, equations of motion for the gear driving system were derived. Two computer programs are developed to calculate mesh stiffness, transmission error and friction force and analyze the dynamics of the modeled system using a time integration method. The influences of mesh stiffness/damping, bearing, and friction affecting the system were investigated by performing eigenvalue analysis and time response analysis. It is found that the reduction of the maximum peak magnitude by friction is decided according to designing the positions of pitch point and maximum peak in the responses.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2005년도 학술발표회 논문집
• /
• pp.497-504
• /
• 2005

This paper presents the results of experimental studies on the equipment isolation effect considering the floor response. For this purpose, shaking table tests were performed. For the measuring the floor response, numerical analysis was performed. For the isolation for the equipment, Natural Rubber Bearing(NRB), High Damping Rubber Bearing(HDRB) and Friction Pendulum System(FPS) were used. Finally, it is presented that the isolation systems used in this test can be adopted for the small equipment isolation. But the rubber bearing used in this study affected to the temperature change very sensitively.

• 한국안전학회지
• /
• 제12권1호
• /
• pp.9-18
• /
• 1997

This paper is a study on the dynamic characteristics of truncated cone type squeeze film damper(SFD) bearing and rotor system. This model can alter the radial oil film gap which Is Important to the performance of rotor-bearing system and manufactured easily to change the shape concept of traditional circular type SFD bearing. In theoretical analysis, the oil film pressure distribution, the oil film force, the film damping coefficient and the eccentricity ratio, etc. were induced with regard to the film inertia effect. The film damping coefficients and optimum design parameters are calculated. When unbalance parameter U is greater than 0.2, the nonlinear vibration such as "Jump" phenomena appears in the vicinity of rotor critical speed. At this time, the increases of bearing parameter U, journal distance S, Reynolds number Re can control this unstable vibration. The experimental results show that SFD hearing and rotor system which are designed according to the design parameters in the stable region are operated stably in rotational speed 9,600rpm without nonsynchronous behavior.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권3호통권55호
• /
• pp.217-224
• /
• 2009

지진으로부터 구조물의 안전을 확보하기 위하여 많은 공학자들의 연구가 계속되고 있다. 본 연구에서는 납의 이력특성을 이용하여 지진하중을 감소시키는 LRB(lead rubber bearing)의 감쇠능력에 대한 실험적 연구를 수행하였다. 납 플러그의 면적비를 주요변수로 설계한 2종류 12개의 시험체를 제작하여 변위제어시험을 시행하였다. 감쇠비 결정을 위한 이력감쇠곡선을 얻기 위하여 2개의 시험체가 한 쌍을 이루도록 배치하고 3회 반복이력시험을 수행하였다. 실험결과로부터 본 연구에서의 납 플러그 면적비가 큰 LRB는 지진시 구조물의 지진하중을 감소시키는데 충분한 감쇠비를 보유하고 있음을 알 수 있었다.